Route from Barking and Dagenham to Hillingdon
The distance between Barking and Dagenham and Hillingdon is 34.5 miles. Travel time is 55 minutes.
To: Hillingdon, County: Greater London, EnglandDriving directions from Barking and Dagenham to Hillingdon
How much is the expense of driving from Barking and Dagenham to Hillingdon?
The expense of driving from Barking and Dagenham to Hillingdon, using petrol as the fuel source, amounts to £6. This calculation derives from considering the petrol price as 144 pence per liter and the car's fuel efficiency at 37.5 miles per gallon. When carpooling with two passengers, the cost of the trip per passenger is halved to £3 (£6 divided by 2). With three passengers, the expense drops to approximately £2 per passenger (£6 divided by 3), and with four passengers, it's reduced further to £1.5 per passenger (£6 divided by 4).
To delve into the details of the calculations, the fuel cost computation is reliant on the distance traveled and the car's fuel consumption rate. For the journey from Barking and Dagenham to Hillingdon, approximately 4.2 liters of fuel would be required. This amount is determined by dividing the distance of 34.5 miles by the car's fuel consumption rate of 37.5 miles per gallon, and then converting from gallons to liters using the conversion factor of 4.54609 liters per gallon.
Multiplying the fuel needed by the petrol price per liter results in the total fuel cost of £6 for the trip. This breakdown illustrates the impact of various factors, such as fuel price and consumption rate, on the overall cost of the journey, providing insights for individuals planning similar trips and requiring budget estimates.
Fuel consumption in automobiles can be affected by the following factors:
In severe traffic, drivers frequently have to stop and start their vehicles multiple times, and they also have to wait in traffic lines for extended periods of time. When compared to driving on open highways with the flow of traffic, this frequent acceleration and deceleration might contribute to an increase in the amount of fuel that is consumed.
It is possible to increase fuel consumption by carrying additional weight in the vehicle, such as large goods or objects that are not necessary. This is because the engine is put under additional pressure while the vehicle is carrying excess weight. Improving fuel economy can be accomplished by removing unneeded weight.
Elevation Changes: Driving on roads that have steep inclines or drops can have an effect on fuel usage, particularly for vehicles that have engines that are not as strong. During a descent downhill, it may be necessary to use greater braking and petrololine in order to maintain control, but climbing uphill takes more power from the engine, which in turn consumes more fuel.
Weather Conditions: Unfavourable weather conditions, such as rain, snow, or strong winds, can have an impact on the amount of petrololine that is consumed. It may be necessary for drivers to modify their speed and driving behaviour in response to these conditions, which will have an effect on fuel efficiency.
Diesel cost from Barking and Dagenham to Hillingdon.
The trip with diesel fuel costs 4.2 £ (167p/lt, 62.7 mpg).
For 2 passengers: 2.1 £ (4.2/2) /p.
For 3 passengers: 1.4 £ (4.2/3) /p.
For 4 passengers: 1.05 £ (4.2/4) /p.
Alternative routes from Barking and Dagenham to Hillingdon
The second route from Barking and Dagenham to the Hillingdon is 52.73 miles and takes 1 hour and 5 minutes.
Which is the cheapest route from Barking and Dagenham to Hillingdon by car?
The cheapest route from Barking and Dagenham to Hillingdon is the first suggested route (34.5mi, 55min) and costs 6 £ (petrol fuel cost, 144p/lt, 37.5mpg).
The most expensive route from Barking and Dagenham to Hillingdon is the second suggested route (52.7mi, 1h 5min) and costs 9.2 £.
For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).
How to get from Barking and Dagenham to Hillingdon?
There are two suggested routes. The fastest route is 34.5mi (distance from Barking and Dagenham to Hillingdon) and its duration is 55min. The slowest route is 52.7mi, and its duration is 1h 5min.
RouteCalculator provides you with the information to prepare your trip from Barking and Dagenham to Hillingdon by car or motorbike. It offers you alternative road routes that you can follow to go from Barking and Dagenham to Hillingdon. It provides driving directions from Barking and Dagenham to Hillingdon, i.e. where to turn and when, distance of the Barking and Dagenham - Hillingdon route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.
In case you share the journey (carpooling) from Barking and Dagenham to Hillingdon with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.
Where is Barking and Dagenham located?
Barking and Dagenham is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Barking and Dagenham has coordinates 51.5464828o,0.1293497o. RouteCalculator provides a map of Barking and Dagenham from which you can plan your trips to other UK cities.
What is the location of Hillingdon?
Hillingdon is located in Greater London county and in England. It is situated at an altitude of 57 meters above sea level. Hillingdon has coordinates 51.5351832o,-0.4481378o. RouteCalculator provides a map of Hillingdon from which you can plan your trips to other UK cities.
- Route from Barking and Dagenham to Hinckley and Bosworth
- Distance from Barking and Dagenham to Horsham
- Route from Barking and Dagenham to Hounslow
- Distance from Barking and Dagenham to Hull
- Miles from Barking and Dagenham to Huntingdonshire
- How far is from Barking and Dagenham to Hyndburn
- Route from Barking and Dagenham to Inverness
- Distance from Barking and Dagenham to Ipswich
- Distance from Barking and Dagenham to Irvine