Route from Barking and Dagenham to Middlesbrough
The distance between Barking and Dagenham and Middlesbrough is 253 miles. Travel time is 4 hours and 17 minutes.
To: Middlesbrough, County: North Yorkshire, EnglandDriving directions from Barking and Dagenham to Middlesbrough
How much does it cost to drive from Barking and Dagenham to Middlesbrough?
The trip with petrol fuel costs 44.2 £. In the above calculation, the petrol price is considered to be 144 pence per liter and the petrol consumption of the car is 37.5 miles per gallon.
For 2 passengers in carpooling, the cost of this trip is 22.1 £ (44.2/2) per passenger.
For 3 passengers in the car, the cost of this trip is 14.73 £ (44.2/3) per passenger.
For 4 passengers in the car, the cost of this trip are 11.05 £ (44.2/4) per passenger.
Fuel cost = (253.44 mi / 37.5 mpg) x 144 pence per liter = 44.2 £
In more detail, the result is obtained:
Fuel needed = Distance / Car fuel consumption = miles * 4.54609 / carConsumtion = 253.44 mi * 4.54609 / 37.5 mpg = 30.7 liters
Fuel needed = 30.7 lt
Fuel cost = Fuel needed x Price per liter = 30.7 liters x 144 pence per liter = 44.2 £
Fuel cost from Barking and Dagenham to Middlesbrough = 44.2 £
Diesel cost from Barking and Dagenham to Middlesbrough.
The trip with diesel fuel costs 30.7 £ (167p/lt, 62.7 mpg).
For 2 passengers: 15.35 £ (30.7/2) /p.
For 3 passengers: 10.23 £ (30.7/3) /p.
For 4 passengers: 7.68 £ (30.7/4) /p.
For these reasons, diesel cars use less fuel than petrol cars:
Diesel fuel has more energy per litre than petrol. Diesel engines can drive farther and provide more power for the same fuel volume, reducing fuel consumption.
Diesel engines have higher compression ratios than petrol engines, increasing thermal efficiency. Diesel engines get more energy from each fuel unit due to this increased compression ratio. Because diesel engines are thermally efficient, they use less fuel.
Diesel engines create more torque at lower RPM than petrol engines. Diesel vehicles require less throttle input to maintain speed, which improves fuel efficiency, especially during steady-state driving.
Diesel cars consume less fuel than petrol cars due to these considerations.
Alternative routes from Barking and Dagenham to Middlesbrough
The slowest route from Barking and Dagenham to the Middlesbrough is 262.15 miles and takes 4 hours and 29 minutes.
Which is the cheapest route from Barking and Dagenham to Middlesbrough by car?
The cheapest route from Barking and Dagenham to Middlesbrough is the first suggested route (253mi, 4h 17min) and costs 44.2 £ (petrol fuel cost, 144p/lt, 37.5mpg).
The most expensive route from Barking and Dagenham to Middlesbrough is the second suggested route (262mi, 4h 29min) and costs 45.8 £.
For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).
How to get from Barking and Dagenham to Middlesbrough?
There are two suggested routes. The fastest route is 253mi (distance from Barking and Dagenham to Middlesbrough) and its duration is 4h 17min. The slowest route is 262mi, and its duration is 4h 29min.
RouteCalculator provides you with the information to prepare your trip from Barking and Dagenham to Middlesbrough by car or motorbike. It offers you alternative road routes that you can follow to go from Barking and Dagenham to Middlesbrough. It provides driving directions from Barking and Dagenham to Middlesbrough, i.e. where to turn and when, distance of the Barking and Dagenham - Middlesbrough route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.
In case you share the journey (carpooling) from Barking and Dagenham to Middlesbrough with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.
Where is Barking and Dagenham located?
Barking and Dagenham is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Barking and Dagenham has coordinates 51.5464828o,0.1293497o. RouteCalculator provides a map of Barking and Dagenham from which you can plan your trips to other UK cities.
What is the location of Middlesbrough?
Middlesbrough is located in North Yorkshire county and in England. It is situated at an altitude of 11 meters above sea level. Middlesbrough has coordinates 54.5742270o,-1.2349560o. RouteCalculator provides a map of Middlesbrough from which you can plan your trips to other UK cities.
- Route from Barking and Dagenham to Milton Keynes
- Distance from Barking and Dagenham to Mole Valley
- Route from Barking and Dagenham to Motherwell
- Distance from Barking and Dagenham to Musselburgh
- Miles from Barking and Dagenham to Neath
- How far is from Barking and Dagenham to New Forest
- Route from Barking and Dagenham to Newark and Sherwood
- Distance from Barking and Dagenham to Newcastle-under-Lyme
- Distance from Barking and Dagenham to Newcastle upon Tyne
