Route from Barking and Dagenham to Rother

The distance between Barking and Dagenham and Rother is 57 miles. Travel time is 1 hour and 6 minutes.

From: Barking and Dagenham, County: Greater London, England
To: Rother, County: East Sussex, England
57 mi , 1 h 6 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Barking and Dagenham to Rother on map



Driving directions from Barking and Dagenham to Rother

57 mi 1 h 6 min
1.
Head west on Wren Road
665 ft
2.
Turn left onto Porters Avenue (A1153)
873 ft
3.
Turn left onto Gale Street
1 mi
4.
Turn left onto Ripple Road (A13)
4.8 mi
5.
Take the ramp on the left towards Wennington
0.3 mi
6.
Enter the roundabout and take the 3rd exit onto London Road (A1306)
230 ft
7.
Exit the roundabout onto London Road (A1306)
399 ft
8.
Enter the roundabout and take the 1st exit onto London Road (A1306)
115 ft
9.
Exit the roundabout onto London Road (A1306)
0.6 mi
10.
Continue onto Arterial Road Purfleet (A1306)
0.5 mi
11.
Enter the roundabout and take the 1st exit onto Arterial Road Purfleet (A1306)
131 ft
12.
Exit the roundabout onto Arterial Road Purfleet (A1306)
0.9 mi
13.
Enter Purfleet Interchange and take the 4th exit
1296 ft
14.
Exit the roundabout
0.3 mi
15.
Merge right onto Canterbury Way (A282)
4.1 mi
16.
Continue towards M25: Dover (M20)
10.4 mi
17.
Keep right towards A21: Sevenoaks
1.4 mi
18.
Continue onto Sevenoaks Bypass (A21)
4 mi
19.
Continue onto Tonbridge Bypass (A21)
6.6 mi
20.
Continue onto Pembury Road (A21)
1.5 mi
21.
Continue onto Pembury Bypass (A21)
2.5 mi
22.
Continue onto Hastings Road (A21)
0.6 mi
23.
Enter Kipping's Cross Roundabout and take the 2nd exit onto A21
113 ft
24.
Exit the roundabout onto A21
798 ft
25.
Enter the roundabout and take the 1st exit onto A21
91 ft
26.
Exit the roundabout onto A21
3 mi
27.
Enter Forstal Farm Roundabout and take the 2nd exit onto Lamberhurst Bypass (A21)
209 ft
28.
Exit the roundabout onto Lamberhurst Bypass (A21)
1.4 mi
29.
Enter Scotney Castle Roundabout and take the 1st exit onto A21
109 ft
30.
Exit the roundabout onto A21
6.6 mi
31.
Turn right onto Station Road (A265)
1.9 mi
32.
Turn left onto Oxenbridge Lane
0.7 mi
33.
Continue onto Ludpit Lane
1.1 mi
34.
Turn right to stay on Ludpit Lane
46 ft
35.
Turn right onto Brightling Road
1.8 mi
36.
You have arrived at your destination, on the left
0 ft


How much does it cost to travel from Barking and Dagenham to Rother by car?

The journey, fueled by petrol, comes to £10. In this calculation, we've assumed a petrol price of 144 pence per liter and the car's petrol consumption at 37.5 miles per gallon.

For those considering carpooling, with two passengers, the cost per person is £5 (£10/2). With three passengers, the cost reduces to £3.33 per person (£10/3). And for four passengers, it further decreases to £2.5 per person (£10/4).

To break it down further, here's how we arrive at the result:

The fuel required is determined by dividing the distance by the car's fuel consumption. For a journey of 56.96 miles, this calculation involves multiplying 56.96 miles by 4.54609 (liters per gallon) and dividing by the car's consumption of 37.5 mpg, resulting in 6.9 liters of fuel needed.

The fuel cost is then calculated by multiplying the fuel needed by the price per liter. For 6.9 liters of fuel at 144 pence per liter, the total comes to £10.

In conclusion, the fuel cost from Barking and Dagenham to Rother amounts to £10.

 

How much fuel a car uses is directly related to how well its engine is oiled. How to do it: 

 

  • Efficiency: An engine that has been properly cared for and is in good shape works more efficiently, which means it can burn fuel more efficiently and use less of it to make the same amount of power. 
     
  • Combustion: If the fuel injectors are dirty, the air filters are jammed, or the spark plugs don't work right, the fuel may not burn all the way. This is called incomplete combustion. This wastes fuel and makes people use more of it. 
     
  • Fuel blend: For the engine to burn efficiently, the fuel-air blend needs to be carefully managed. Any changes from the right ratio, like when an oxygen monitor or fuel injector doesn't work right, can cause the engine to use more fuel than it should. 
     
  • Mechanical Wear: As an engine ages, parts inside it like piston rings, valves, and seals can wear out. This makes the engine less efficient and causes it to use more petrol. This wear can be lessened with regular upkeep, which can also help keep fuel use in check. 
     
  • Ignition Timing: If the ignition timing is off, it can cause inefficient combustion and higher fuel usage. This can be caused by a worn distributor or a broken ignition system. 
     

To sum up, the state of a car's engine is a major factor in how much fuel it uses. For the engine to work well and use little petrol, it needs to be serviced regularly and fixed quickly when something goes wrong.

Diesel cost from Barking and Dagenham to Rother.

The trip with diesel fuel costs 6.9 £ (167p/lt, 62.7 mpg).
For 2 passengers: 3.45 £ (6.9/2) /p.
For 3 passengers: 2.3 £ (6.9/3) /p.
For 4 passengers: 1.73 £ (6.9/4) /p.

Alternative routes from Barking and Dagenham to Rother

An alternative route from Barking and Dagenham to the Rother is 56.66 miles and takes 1 hour and 17 minutes.

Which is the cheapest route from Barking and Dagenham to Rother by car?

The cheapest route from Barking and Dagenham to Rother is the second suggested route (56.7mi, 1h 17min) and costs 9.9 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The most expensive route from Barking and Dagenham to Rother is the first suggested route (57mi, 1h 6min) and costs 10 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Barking and Dagenham to Rother?

There are two suggested routes. The fastest route is 57mi (distance from Barking and Dagenham to Rother) and its duration is 1h 6min. The slowest route is 56.7mi, and its duration is 1h 17min.

RouteCalculator provides you with the information to prepare your trip from Barking and Dagenham to Rother by car or motorbike. It offers you alternative road routes that you can follow to go from Barking and Dagenham to Rother. It provides driving directions from Barking and Dagenham to Rother, i.e. where to turn and when, distance of the Barking and Dagenham - Rother route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Barking and Dagenham to Rother with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Barking and Dagenham located?

Barking and Dagenham is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Barking and Dagenham has coordinates 51.5464828o,0.1293497o. RouteCalculator provides a map of Barking and Dagenham from which you can plan your trips to other UK cities.

What is the location of Rother?

Rother is located in East Sussex county and in England. It is situated at an altitude of 92 meters above sea level. Rother has coordinates 50.9698730o,0.4159547o. RouteCalculator provides a map of Rother from which you can plan your trips to other UK cities.