Route from Barking and Dagenham to Southend-on-Sea

The distance between Barking and Dagenham and Southend-on-Sea is 31.4 miles. Travel time is 40 minutes.

From: Barking and Dagenham, County: Greater London, England
To: Southend-on-Sea, County: Essex, England
31.4 mi , 40 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Barking and Dagenham to Southend-on-Sea on map



Driving directions from Barking and Dagenham to Southend-on-Sea

31.4 mi 40 min
1.
Head west on Wren Road
665 ft
2.
Turn left onto Porters Avenue (A1153)
873 ft
3.
Turn left onto Gale Street
1 mi
4.
Turn left onto Ripple Road (A13)
17.1 mi
5.
Continue onto Stanford-le-Hope By-Pass (A13)
5.2 mi
6.
Enter Rayleigh Spur Roundabout and take the 2nd exit onto Canvey Way (A1245)
271 ft
7.
Exit the roundabout onto Canvey Way (A1245)
0.4 mi
8.
Enter Fairglen Interchange and take the 3rd exit onto A127
643 ft
9.
Exit the roundabout onto A127
1175 ft
10.
Merge right onto Southend Arterial Road (A127)
3.4 mi
11.
Continue onto Southend Arterial Road (A127)
1.1 mi
12.
Continue onto Prince Avenue (A127)
0.7 mi
13.
Merge right onto Tesco Roundabout
302 ft
14.
Keep left onto Prince Avenue (A127)
0.9 mi
15.
Enter Cuckoo Corner and take the 3rd exit onto Victoria Avenue (A127)
211 ft
16.
Exit the roundabout onto Victoria Avenue (A127)
0.8 mi
17.
Turn left onto Carnarvon Road
86 ft
18.
You have arrived at your destination, on the left
0 ft


What's the expense of traveling from Barking and Dagenham to Southend-on-Sea by car?

Embarking on the journey from Barking and Dagenham to Southend-on-Sea, one might ponder the cost of such a venture. Indeed, the expenditure amounts to 5.5 pounds when fueled by petrol. In this calculation, we delve into the intricate details, where the price of petrol stands at 144 pence per liter, and the car's thirst for fuel measures 37.5 miles per gallon.

For those opting for carpooling, the financial burden lightens, with a cost of 2.75 pounds for each of two passengers, 1.83 pounds for three passengers, and merely 1.38 pounds for four passengers.

Delving deeper into the mechanics of the calculation, we ascertain the amount of fuel required for the voyage. Covering a distance of approximately 31.43 miles, the car craves around 3.8 liters of petrol. This value is derived from the division of the distance by the car's fuel consumption rate, converted into liters for precision.

With the quantity of fuel determined, we proceed to compute the total expenditure. By multiplying the fuel volume (3.8 liters) by the price per liter (144 pence), we seamlessly arrive at the grand total of 5.5 pounds. Thus, the journey from Barking and Dagenham to Southend-on-Sea is marked by a fuel cost of 5.5 pounds.
 

Diesel cost from Barking and Dagenham to Southend-on-Sea.

The trip with diesel fuel costs 3.8 £ (167p/lt, 62.7 mpg).
For 2 passengers: 1.9 £ (3.8/2) /p.
For 3 passengers: 1.27 £ (3.8/3) /p.
For 4 passengers: 0.95 £ (3.8/4) /p.


Generally, diesel engines typically consume less fuel than petrol engines when all other factors are held constant. This is mainly because diesel fuel has a higher energy density and diesel engines are more thermally efficient. Diesel contains more energy per liter than petrol, and diesel engines are usually better at converting this energy into mechanical power. Moreover, diesel engines operate at higher compression ratios, enhancing their thermal efficiency and enabling them to extract more energy from each unit of fuel. Consequently, diesel vehicles often deliver superior fuel economy and can cover longer distances per gallon or liter of fuel compared to petrol vehicles of similar specifications.

Alternative routes from Barking and Dagenham to Southend-on-Sea

The most time-consuming route from Barking and Dagenham to Southend-on-Sea spans a distance of 29.7 miles and requires a travel time of 42 minutes.

Which is the cheapest route from Barking and Dagenham to Southend-on-Sea by car?

The cheapest route from Barking and Dagenham to Southend-on-Sea is the second suggested route (29.7mi, 42min) and costs 5.2 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The most expensive route from Barking and Dagenham to Southend-on-Sea is the first suggested route (31.4mi, 40min) and costs 5.5 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Barking and Dagenham to Southend-on-Sea?

There are two suggested routes. The fastest route is 31.4mi (distance from Barking and Dagenham to Southend-on-Sea) and its duration is 40min. The slowest route is 29.7mi, and its duration is 42min.

RouteCalculator provides you with the information to prepare your trip from Barking and Dagenham to Southend-on-Sea by car or motorbike. It offers you alternative road routes that you can follow to go from Barking and Dagenham to Southend-on-Sea. It provides driving directions from Barking and Dagenham to Southend-on-Sea, i.e. where to turn and when, distance of the Barking and Dagenham - Southend-on-Sea route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Barking and Dagenham to Southend-on-Sea with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Barking and Dagenham located?

Barking and Dagenham is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Barking and Dagenham has coordinates 51.5464828o,0.1293497o. RouteCalculator provides a map of Barking and Dagenham from which you can plan your trips to other UK cities.

What is the location of Southend-on-Sea?

Southend-on-Sea is located in Essex county and in England. It is situated at an altitude of 29 meters above sea level. Southend-on-Sea has coordinates 51.5459269o,0.7077123o. RouteCalculator provides a map of Southend-on-Sea from which you can plan your trips to other UK cities.