Route from Barking and Dagenham to Surrey Heath

The distance between Barking and Dagenham and Surrey Heath is 70 miles. Travel time is 1 hour and 16 minutes.

From: Barking and Dagenham, County: Greater London, England
To: Surrey Heath, County: Surrey, England
70 mi , 1 h 16 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Barking and Dagenham to Surrey Heath on map



Driving directions from Barking and Dagenham to Surrey Heath

70 mi 1 h 16 min
1.
Head west on Wren Road
665 ft
2.
Turn left onto Porters Avenue (A1153)
873 ft
3.
Turn left onto Gale Street
1 mi
4.
Turn left onto Ripple Road (A13)
4.8 mi
5.
Take the ramp on the left towards Wennington
0.3 mi
6.
Enter the roundabout and take the 3rd exit onto London Road (A1306)
230 ft
7.
Exit the roundabout onto London Road (A1306)
399 ft
8.
Enter the roundabout and take the 1st exit onto London Road (A1306)
115 ft
9.
Exit the roundabout onto London Road (A1306)
0.6 mi
10.
Continue onto Arterial Road Purfleet (A1306)
0.5 mi
11.
Enter the roundabout and take the 1st exit onto Arterial Road Purfleet (A1306)
131 ft
12.
Exit the roundabout onto Arterial Road Purfleet (A1306)
0.9 mi
13.
Enter Purfleet Interchange and take the 4th exit
1296 ft
14.
Exit the roundabout
0.3 mi
15.
Merge right onto Canterbury Way (A282)
4.1 mi
16.
Continue towards M25: Dover (M20)
10.4 mi
17.
Keep left towards M25: Gatwick (M23)
36.3 mi
18.
Take the ramp on the left towards M3: Basingstoke
0.3 mi
19.
Keep left towards M3: Basingstoke
0.4 mi
20.
Merge right onto M3
6.2 mi
21.
Take the ramp on the left towards A322: Bracknell
0.4 mi
22.
Go straight onto A322
1.6 mi
23.
Enter the roundabout and take the 2nd exit onto Guildford Road (A322)
232 ft
24.
Exit the roundabout onto Guildford Road (A322)
0.3 mi
25.
Turn right onto Brentmoor Road
0.9 mi
26.
You have arrived at your destination
0 ft


What's the expense of traveling from Barking and Dagenham to Surrey Heath by car?

If you're using petrol, you're looking at an expense of 12.2 quid. Now, how do we get to that number? Let's break it down.

First off, we need to consider the price of petrol. In this calculation, it's set at 144 pence per liter. Then, we need to know how thirsty your car is. The fuel consumption rate for this ride is 37.5 miles per gallon.

Now, if you're carpooling, the cost gets divvied up. For two people sharing the ride, it's gonna be 6.1 quid each (£12.2 divided by 2). If you've got three folks in the car, the cost per person comes down to about 4.07 quid (£12.2 divided by 3). And if it's a full house with four passengers, each person chips in 3.05 quid (£12.2 divided by 4).

Let's dive into the nitty-gritty of the calculations. To figure out how much fuel you need for the trip, it's all about distance and fuel efficiency. The distance between Barking and Dagenham and Surrey Heath is about 69.96 miles. So, to cover that distance, your car's gonna need approximately 8.5 liters of petrol. We got that number by dividing the distance by the car's fuel consumption rate of 37.5 miles per gallon and then converting it to liters 'cause that's what we use here.

Once we know how much fuel we need, we can calculate the total cost. Multiply the amount of fuel (8.5 liters) by the price per liter (144 pence), and you get 12.2 quid. So, there you have it, the fuel cost for your journey from Barking and Dagenham to Surrey Heath: 12.2 pounds.
 

Diesel cost from Barking and Dagenham to Surrey Heath.

The trip with diesel fuel costs 8.5 £ (167p/lt, 62.7 mpg).
For 2 passengers: 4.25 £ (8.5/2) /p.
For 3 passengers: 2.83 £ (8.5/3) /p.
For 4 passengers: 2.13 £ (8.5/4) /p.

Diesel engines vs petrol engines:

  • Spark Ignition (Petrol Engines): In petrol engines, the ignition process begins with the introduction of an air-fuel mixture into the combustion chamber. A spark plug then generates a high-voltage electrical spark, which ignites the compressed air-fuel mixture, initiating combustion. This method is known as spark ignition, as the spark plug plays a crucial role in igniting the mixture.

  • Compression Ignition (Diesel Engines): Diesel engines operate on a different principle known as compression ignition. In these engines, air is compressed within the combustion chamber to a high temperature and pressure by the upward movement of the piston. This compression causes the diesel fuel, injected into the combustion chamber, to ignite spontaneously without the need for a spark plug. The high pressure and temperature created during compression cause the diesel fuel to combust, driving the power stroke of the engine.

Alternative routes from Barking and Dagenham to Surrey Heath

The second route from Barking and Dagenham to the Surrey Heath is 55.62 miles and takes 1 hour and 17 minutes.

The third route from Barking and Dagenham to the Surrey Heath is 45.17 miles and takes 1 hour and 23 minutes.

Which is the cheapest route from Barking and Dagenham to Surrey Heath by car?

The cheapest route from Barking and Dagenham to Surrey Heath is the third suggested route (45.2mi, 1h 23min) and costs 7.9 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The second cheapest route from Barking and Dagenham to Surrey Heath is the second suggested route (55.6mi, 1h 17min) and costs 9.7 £.

The most expensive route from Barking and Dagenham to Surrey Heath is the first suggested route (70mi, 1h 16min) and costs 12.2 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Barking and Dagenham to Surrey Heath?

There are three suggested routes. The fastest route is 70mi (distance from Barking and Dagenham to Surrey Heath) and its duration is 1h 16min. The other route is 55.6mi, and its duration is 1h 17min. The slowest route is 45.2mi, and its duration is 1h 23min.

RouteCalculator provides you with the information to prepare your trip from Barking and Dagenham to Surrey Heath by car or motorbike. It offers you alternative road routes that you can follow to go from Barking and Dagenham to Surrey Heath. It provides driving directions from Barking and Dagenham to Surrey Heath, i.e. where to turn and when, distance of the Barking and Dagenham - Surrey Heath route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Barking and Dagenham to Surrey Heath with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Barking and Dagenham located?

Barking and Dagenham is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Barking and Dagenham has coordinates 51.5464828o,0.1293497o. RouteCalculator provides a map of Barking and Dagenham from which you can plan your trips to other UK cities.

What is the location of Surrey Heath?

Surrey Heath is located in Surrey county and in England. It is situated at an altitude of 48 meters above sea level. Surrey Heath has coordinates 51.3346257o,-0.6689460o. RouteCalculator provides a map of Surrey Heath from which you can plan your trips to other UK cities.