Route from Stoke-on-Trent to Bearsden

The distance between Stoke-on-Trent and Bearsden is 254 miles. Travel time is 4 hours and 17 minutes.

From: Stoke-on-Trent, County: Staffordshire, England
To: Bearsden, County: East Dunbartonshire, Scotland
254 mi , 4 h 17 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Stoke-on-Trent to Bearsden on map



Driving directions from Stoke-on-Trent to Bearsden

254 mi 4 h 17 min
1.
Head west on City Road (A5007)
113 ft
2.
Turn right
768 ft
3.
Keep right at the fork
604 ft
4.
Merge right onto Queensway (A500)
8.7 mi
5.
Enter Barthomley Interchange and take the 4th exit onto M6
908 ft
6.
Exit the roundabout onto M6
35.5 mi
7.
Keep right onto M6
116 mi
8.
Continue onto A74(M)
48.9 mi
9.
Continue onto M74
36.7 mi
10.
Take exit 1 on the left towards Kinning Park
1187 ft
11.
Keep left towards Kinning Park
232 ft
12.
Make a slight left onto Carnoustie Street
20 ft
13.
Turn left onto Scotland Street
974 ft
14.
Continue slightly left onto West Street
663 ft
15.
Take the ramp on the left towards M8 East: City Centre
0.3 mi
16.
Continue onto Kingston Bridge
1275 ft
17.
Keep left towards A814: Clydebank
1132 ft
18.
Go straight onto Clydeside Expressway (A814)
2.4 mi
19.
Make a slight right
0.3 mi
20.
Go straight onto A739
2.5 mi
21.
Enter Canniesburn Toll and take the 1st exit onto Drymen Road (A809)
13 ft
22.
Exit the roundabout onto Drymen Road (A809)
0.9 mi
23.
You have arrived at your destination, on the left
0 ft


What's the expense of traveling from Stoke-on-Trent to Bearsden by car?

If you're using petrol, you're looking at an expense of 44 quid. Now, how do we get to that number? Let's break it down.

First off, we need to consider the price of petrol. In this calculation, it's set at 143 pence per liter. Then, we need to know how thirsty your car is. The fuel consumption rate for this ride is 37.5 miles per gallon.

Now, if you're carpooling, the cost gets divvied up. For two people sharing the ride, it's gonna be 22 quid each (£44 divided by 2). If you've got three folks in the car, the cost per person comes down to about 14.67 quid (£44 divided by 3). And if it's a full house with four passengers, each person chips in 11 quid (£44 divided by 4).

Let's dive into the nitty-gritty of the calculations. To figure out how much fuel you need for the trip, it's all about distance and fuel efficiency. The distance between Stoke-on-Trent and Bearsden is about 253.91 miles. So, to cover that distance, your car's gonna need approximately 30.8 liters of petrol. We got that number by dividing the distance by the car's fuel consumption rate of 37.5 miles per gallon and then converting it to liters 'cause that's what we use here.

Once we know how much fuel we need, we can calculate the total cost. Multiply the amount of fuel (30.8 liters) by the price per liter (143 pence), and you get 44 quid. So, there you have it, the fuel cost for your journey from Stoke-on-Trent to Bearsden: 44 pounds.
 

Diesel cost from Stoke-on-Trent to Bearsden.

The trip with diesel fuel costs 27.8 £ (151p/lt, 62.7 mpg).
For 2 passengers: 13.9 £ (27.8/2) /p.
For 3 passengers: 9.27 £ (27.8/3) /p.
For 4 passengers: 6.95 £ (27.8/4) /p.

Diesel fuel and petrol (gasoline) fuel in terms of emissions:

  • Diesel Fuel: Diesel combustion generally produces higher levels of nitrogen oxides (NOx) and particulate matter compared to petrol combustion. This is due to the combustion characteristics of diesel engines, as well as the composition of diesel fuel. However, advancements in diesel engine technology, such as particulate filters and selective catalytic reduction (SCR) systems, have significantly reduced emissions from modern diesel vehicles.

  • Petrol (Gasoline): Petrol combustion typically produces lower levels of nitrogen oxides and particulate matter compared to diesel combustion. Petrol engines emit fewer particulates because petrol itself contains fewer impurities compared to diesel. Additionally, petrol engines may emit lower levels of nitrogen oxides due to differences in combustion processes and engine design.

Where is Stoke-on-Trent located?

Stoke-on-Trent is located in Staffordshire county and in England. It is situated at an altitude of 114 meters above sea level. Stoke-on-Trent has coordinates 53.0026680o,-2.1794040o. RouteCalculator provides a map of Stoke-on-Trent from which you can plan your trips to other UK cities.

What is the location of Bearsden?

Bearsden is located in East Dunbartonshire county and in Scotland. It is situated at an altitude of 61 meters above sea level. Bearsden has coordinates 55.9216900o,-4.3355250o. RouteCalculator provides a map of Bearsden from which you can plan your trips to other UK cities.