Route from Barking and Dagenham to Melton

The distance between Barking and Dagenham and Melton is 128 miles. Travel time is 2 hours and 15 minutes.

From: Barking and Dagenham, County: Greater London, England
To: Melton, County: Leicestershire, England
128 mi , 2 h 15 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Barking and Dagenham to Melton on map



Driving directions from Barking and Dagenham to Melton

128 mi 2 h 15 min
1.
Head west on Wren Road
665 ft
2.
Turn left onto Porters Avenue (A1153)
0.7 mi
3.
Turn left onto Lodge Avenue (A1153)
0.7 mi
4.
Take the ramp onto Alfred's Way (A13)
1.4 mi
5.
Take the ramp on the left onto A13
1022 ft
6.
Enter Beckton Roundabout and take the 3rd exit onto North Circular Road (A406)
1171 ft
7.
Exit the roundabout onto North Circular Road (A406)
4.4 mi
8.
Keep left towards Cambridge
22.2 mi
9.
Keep right onto M11
28.4 mi
10.
Merge right onto Huntingdon Road (A14)
13.7 mi
11.
Continue onto A14
314 ft
12.
Take the ramp on the left onto A14
44.6 mi
13.
Turn left onto Heath Lane
2.9 mi
14.
Continue slightly right onto Ten Acre Lane
0.4 mi
15.
Turn left onto Gorse Lane
2.4 mi
16.
Turn left onto A607
4.1 mi
17.
Turn right onto Goadby Road
571 ft
18.
Continue onto Waltham Road
0.7 mi
19.
Turn left onto Main Street
0.9 mi
20.
You have arrived at your destination, on the left
0 ft


What's the cost of a drive from Barking and Dagenham to Melton?

The journey, powered by petrol, sets you back £22.3. In this calculation, we're crunching numbers based on a petrol price of 144 pence per liter and a car's thirst of 37.5 miles per gallon. If you're carpooling with a buddy, that's £11.15 each (£22.3 divided by 2). With a trio onboard, it drops to around £7.43 a head (£22.3 divided by 3), and with a full car of four, it's a mere £5.58 per person (£22.3 divided by 4).

Let's dig into the math behind it. The fuel expenditure hinges on the distance covered and the car's efficiency. For this particular jaunt, you're looking at guzzling down roughly 15.5 liters of fuel. Crunching the numbers, that's where the £22.3 total comes from for the trip from Barking and Dagenham to Melton.
 

Diesel cost from Barking and Dagenham to Melton.

The trip with diesel fuel costs 15.5 £ (167p/lt, 62.7 mpg).
For 2 passengers: 7.75 £ (15.5/2) /p.
For 3 passengers: 5.17 £ (15.5/3) /p.
For 4 passengers: 3.88 £ (15.5/4) /p.

In general, diesel engines tend to have lower fuel consumption compared to petrol engines, all else being equal. This is primarily due to the higher energy density of diesel fuel and the higher thermal efficiency of diesel engines. Diesel fuel contains more energy per liter than petrol, and diesel engines are typically more efficient at converting that energy into mechanical work.

Additionally, diesel engines operate at higher compression ratios, which improves their thermal efficiency and allows them to extract more energy from each unit of fuel. As a result, diesel vehicles often achieve better fuel economy and can travel farther on a gallon or liter of fuel compared to petrol vehicles of similar size and performance.

Alternative routes from Barking and Dagenham to Melton

The second route from Barking and Dagenham to the Melton is 128.92 miles and takes 2 hours and 23 minutes.

The third route from Barking and Dagenham to the Melton is 131.17 miles and takes 2 hours and 39 minutes.

Which is the cheapest route from Barking and Dagenham to Melton by car?

The cheapest route from Barking and Dagenham to Melton is the first suggested route (128mi, 2h 15min) and costs 22.3 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The second cheapest route from Barking and Dagenham to Melton is the second suggested route (129mi, 2h 23min) and costs 22.5 £.

The most expensive route from Barking and Dagenham to Melton is the third suggested route (131mi, 2h 39min) and costs 22.9 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Barking and Dagenham to Melton?

There are three suggested routes. The fastest route is 128mi (distance from Barking and Dagenham to Melton) and its duration is 2h 15min. The other route is 129mi, and its duration is 2h 23min. The slowest route is 131mi, and its duration is 2h 39min.

RouteCalculator provides you with the information to prepare your trip from Barking and Dagenham to Melton by car or motorbike. It offers you alternative road routes that you can follow to go from Barking and Dagenham to Melton. It provides driving directions from Barking and Dagenham to Melton, i.e. where to turn and when, distance of the Barking and Dagenham - Melton route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Barking and Dagenham to Melton with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Barking and Dagenham located?

Barking and Dagenham is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Barking and Dagenham has coordinates 51.5464828o,0.1293497o. RouteCalculator provides a map of Barking and Dagenham from which you can plan your trips to other UK cities.

What is the location of Melton?

Melton is located in Leicestershire county and in England. It is situated at an altitude of 133 meters above sea level. Melton has coordinates 52.8282784o,-0.8432685o. RouteCalculator provides a map of Melton from which you can plan your trips to other UK cities.