Route from Barking and Dagenham to Rochdale
The distance between Barking and Dagenham and Rochdale is 229 miles. Travel time is 3 hours and 54 minutes.
To: Rochdale, County: Greater Manchester, EnglandDriving directions from Barking and Dagenham to Rochdale
How much does it cost to drive from Barking and Dagenham to Rochdale with petrol?
Let's delve into the expenses of a road trip from Barking and Dagenham to Rochdale. The journey using petrol will set you back 40 pounds. Now, let's walk through how we arrived at this figure.
Firstly, we consider the price of petrol, which is 144 pence per liter. Next, we take into account the car's fuel consumption rate, which stands at 37.5 miles per gallon.
Now, suppose you're carpooling. If there are two passengers sharing the ride, each person will contribute 20 pounds (£40 divided by 2). With three passengers, the cost per person drops to around 13.33 pounds (£40 divided by 3). And if there are four passengers onboard, each person chips in 10 pounds (£40 divided by 4).
Let's delve deeper into the calculations. To determine how much fuel is needed for the trip, we rely on the distance and the car's fuel efficiency. The distance between Barking and Dagenham and Rochdale is approximately 229.04 miles. So, to cover this distance, the car will require roughly 27.8 liters of petrol. We obtained this value by dividing the distance by the car's fuel consumption rate of 37.5 miles per gallon and then converting it to liters.
Once we have the amount of fuel needed, we calculate the total cost. Multiplying the fuel quantity (27.8 liters) by the price per liter (144 pence) yields 40 pounds. Therefore, the fuel cost for the journey from Barking and Dagenham to Rochdale is 40 pounds.
The condition of the car can significantly impact fuel consumption. Here's how:
-
Engine Efficiency: A well-maintained engine operates more efficiently, burning fuel more effectively and consuming less. Regular oil changes, air filter replacements, and tune-ups can ensure optimal engine performance.
-
Fuel System Health: Issues with the fuel system, such as clogged fuel injectors or a faulty oxygen sensor, can lead to improper fuel combustion and increased consumption. Regular maintenance and prompt repairs can help prevent such problems.
-
Tire Condition: Worn-out or improperly inflated tires increase rolling resistance, requiring more energy (and fuel) to propel the vehicle. Keeping tires properly inflated and replacing worn-out tires can improve fuel efficiency.
-
Aerodynamics: Damage to the car's body, such as dents or misaligned panels, can disrupt airflow and increase aerodynamic drag, leading to higher fuel consumption. Keeping the car's body in good condition can help maintain optimal aerodynamics.
Diesel cost from Barking and Dagenham to Rochdale.
The trip with diesel fuel costs 27.7 £ (167p/lt, 62.7 mpg).
For 2 passengers: 13.85 £ (27.7/2) /p.
For 3 passengers: 9.23 £ (27.7/3) /p.
For 4 passengers: 6.93 £ (27.7/4) /p.
Alternative routes from Barking and Dagenham to Rochdale
The second route from Barking and Dagenham to the Rochdale is 228.43 miles and takes 3 hours and 55 minutes.
The third route from Barking and Dagenham to the Rochdale is 222.98 miles and takes 4 hours and 39 minutes.
Which is the cheapest route from Barking and Dagenham to Rochdale by car?
The cheapest route from Barking and Dagenham to Rochdale is the third suggested route (223mi, 4h 39min) and costs 38.9 £ (petrol fuel cost, 144p/lt, 37.5mpg).
The second cheapest route from Barking and Dagenham to Rochdale is the second suggested route (228mi, 3h 55min) and costs 39.9 £.
The most expensive route from Barking and Dagenham to Rochdale is the first suggested route (229mi, 3h 54min) and costs 40 £.
For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).
How to get from Barking and Dagenham to Rochdale?
There are three suggested routes. The fastest route is 229mi (distance from Barking and Dagenham to Rochdale) and its duration is 3h 54min. The other route is 228mi, and its duration is 3h 55min. The slowest route is 223mi, and its duration is 4h 39min.
RouteCalculator provides you with the information to prepare your trip from Barking and Dagenham to Rochdale by car or motorbike. It offers you alternative road routes that you can follow to go from Barking and Dagenham to Rochdale. It provides driving directions from Barking and Dagenham to Rochdale, i.e. where to turn and when, distance of the Barking and Dagenham - Rochdale route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.
In case you share the journey (carpooling) from Barking and Dagenham to Rochdale with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.
Where is Barking and Dagenham located?
Barking and Dagenham is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Barking and Dagenham has coordinates 51.5464828o,0.1293497o. RouteCalculator provides a map of Barking and Dagenham from which you can plan your trips to other UK cities.
What is the location of Rochdale?
Rochdale is located in Greater Manchester county and in England. It is situated at an altitude of 144 meters above sea level. Rochdale has coordinates 53.6097136o,-2.1561000o. RouteCalculator provides a map of Rochdale from which you can plan your trips to other UK cities.
- Route from Barking and Dagenham to Rochford
- Distance from Barking and Dagenham to Rossendale
- Route from Barking and Dagenham to Rother
- Distance from Barking and Dagenham to Rotherham
- Miles from Barking and Dagenham to Rugby
- How far is from Barking and Dagenham to Runnymede
- Route from Barking and Dagenham to Rushcliffe
- Distance from Barking and Dagenham to Rutherglen
- Distance from Barking and Dagenham to Rutland
