Route from Bedford to Ribble Valley
The distance between Bedford and Ribble Valley is 206 miles. Travel time is 3 hours and 37 minutes.
To: Ribble Valley, County: Lancashire, EnglandDriving directions from Bedford to Ribble Valley
How much does it cost to drive from Bedford to Ribble Valley?
If you're using petrol, it's gonna set you back 35.7 quid. In this calculation, they're saying the petrol price is 143 pence per liter, and the car's gonna guzzle down 37.5 miles for every gallon of that stuff.
Now, if you're carpooling, the cost gets split up between everyone riding. So, if there are two people in the car, it's gonna be 17.85 quid each (£35.7 divided by 2). With three buddies on board, it works out to around 11.9 quid per person (£35.7 divided by 3). And if you've got a full car with four people, it's only 8.93 quid per person (£35.7 divided by 4).
Breaking down the numbers, the fuel cost is calculated based on how far you're going and how much gas your car chugs. For this trip, you're gonna need about 25 liters of fuel. They figured that out by dividing the distance of 205.86 miles by the car's fuel consumption rate of 37.5 miles per gallon, and then converting that to liters 'cause, you know, the UK uses liters.
So, you take the fuel needed, which is 25 liters, and you multiply it by the price per liter, which is 143 pence. And voilà, you got yourself the total fuel cost for the trip from Bedford to Ribble Valley: 35.7 quid.
Diesel cost from Bedford to Ribble Valley.
The trip with diesel fuel costs 22.5 £ (151p/lt, 62.7 mpg).
For 2 passengers: 11.25 £ (22.5/2) /p.
For 3 passengers: 7.5 £ (22.5/3) /p.
For 4 passengers: 5.63 £ (22.5/4) /p.
For these reasons, diesel cars use less fuel than petrol cars:
Diesel fuel has more energy per litre than petrol. Diesel engines can drive farther and provide more power for the same fuel volume, reducing fuel consumption.
Diesel engines have higher compression ratios than petrol engines, increasing thermal efficiency. Diesel engines get more energy from each fuel unit due to this increased compression ratio. Because diesel engines are thermally efficient, they use less fuel.
Diesel engines create more torque at lower RPM than petrol engines. Diesel vehicles require less throttle input to maintain speed, which improves fuel efficiency, especially during steady-state driving.
Diesel cars consume less fuel than petrol cars due to these considerations.
Alternative routes from Bedford to Ribble Valley
The slowest route from Bedford to the Ribble Valley is 200.66 miles and takes 4 hours and 11 minutes.
Which is the cheapest route from Bedford to Ribble Valley by car?
The cheapest route from Bedford to Ribble Valley is the second suggested route (201mi, 4h 11min) and costs 34.8 £ (petrol fuel cost, 143p/lt, 37.5mpg).
The most expensive route from Bedford to Ribble Valley is the first suggested route (206mi, 3h 37min) and costs 35.7 £.
For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).
How to get from Bedford to Ribble Valley?
There are two suggested routes. The fastest route is 206mi (distance from Bedford to Ribble Valley) and its duration is 3h 37min. The slowest route is 201mi, and its duration is 4h 11min.
RouteCalculator provides you with the information to prepare your trip from Bedford to Ribble Valley by car or motorbike. It offers you alternative road routes that you can follow to go from Bedford to Ribble Valley. It provides driving directions from Bedford to Ribble Valley, i.e. where to turn and when, distance of the Bedford - Ribble Valley route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.
In case you share the journey (carpooling) from Bedford to Ribble Valley with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.
Where is Bedford located?
Bedford is located in Bedfordshire county and in England. It is situated at an altitude of 34 meters above sea level. Bedford has coordinates 52.1359729o,-0.4666546o. RouteCalculator provides a map of Bedford from which you can plan your trips to other UK cities.
What is the location of Ribble Valley?
Ribble Valley is located in Lancashire county and in England. It is situated at an altitude of 218 meters above sea level. Ribble Valley has coordinates 53.9289626o,-2.4627718o. RouteCalculator provides a map of Ribble Valley from which you can plan your trips to other UK cities.
- Route from Bedford to Richmond upon Thames
- Distance from Bedford to Richmondshire
- Route from Bedford to Rochdale
- Distance from Bedford to Rochford
- Miles from Bedford to Rossendale
- How far is from Bedford to Rother
- Route from Bedford to Rotherham
- Distance from Bedford to Rugby
- Distance from Bedford to Runnymede
