Route from Aberdare to Richmond upon Thames
The distance between Aberdare and Richmond upon Thames is 164 miles. Travel time is 2 hours and 60 minutes.
To: Richmond upon Thames, County: Greater London, EnglandDriving directions from Aberdare to Richmond upon Thames
What's the cost of a drive from Aberdare to Richmond upon Thames?
The journey, powered by petrol, sets you back £28.7. In this calculation, we're crunching numbers based on a petrol price of 144 pence per liter and a car's thirst of 37.5 miles per gallon. If you're carpooling with a buddy, that's £14.35 each (£28.7 divided by 2). With a trio onboard, it drops to around £9.57 a head (£28.7 divided by 3), and with a full car of four, it's a mere £7.18 per person (£28.7 divided by 4).
Let's dig into the math behind it. The fuel expenditure hinges on the distance covered and the car's efficiency. For this particular jaunt, you're looking at guzzling down roughly 19.9 liters of fuel. Crunching the numbers, that's where the £28.7 total comes from for the trip from Aberdare to Richmond upon Thames.
Diesel cost from Aberdare to Richmond upon Thames.
The trip with diesel fuel costs 19.9 £ (167p/lt, 62.7 mpg).
For 2 passengers: 9.95 £ (19.9/2) /p.
For 3 passengers: 6.63 £ (19.9/3) /p.
For 4 passengers: 4.98 £ (19.9/4) /p.
When compared to gasoline-powered vehicles, diesel vehicles often have a lower fuel usage percentage for the following reasons:
Diesel fuel has a higher energy density than gasoline, meaning that it contains more energy per litre than gasoline does. Diesel engines are able to create more power and travel further for the same amount of gasoline, which results in a lower overall fuel consumption. This is because diesel engines also travel further.
Diesel engines operate at higher compression ratios than petrol engines, which results in increased thermal efficiency for diesel engines. Because of this increased compression ratio, diesel engines are able to extract a greater amount of energy from each individual dose of fuel. Because of this, diesel engines are often more thermally efficient, which results in a reduction in the amount of fuel these engines consume.
Diesel engines have a tendency to produce higher torque at lower engine speeds (RPM) compared to petrol engines. This is because diesel engines are more efficient than petrol engines. Because diesel vehicles require less throttle input to maintain speed, this trait enables diesel vehicles to retain superior fuel efficiency, particularly during steady-state cruising. This is especially true during the cruising phase.
In comparison to their gasoline-powered counterparts, diesel vehicles have a generally lower fuel consumption, which can be attributed to the combined effects of these particular characteristics.
Alternative routes from Aberdare to Richmond upon Thames
The second route from Aberdare to the Richmond upon Thames is 168.7 miles and takes 3 hours and 22 minutes.
The third route from Aberdare to the Richmond upon Thames is 171.65 miles and takes 3 hours and 47 minutes.
Which is the cheapest route from Aberdare to Richmond upon Thames by car?
The cheapest route from Aberdare to Richmond upon Thames is the first suggested route (164mi, 2h 60min) and costs 28.7 £ (petrol fuel cost, 144p/lt, 37.5mpg).
The second cheapest route from Aberdare to Richmond upon Thames is the second suggested route (169mi, 3h 22min) and costs 29.4 £.
The most expensive route from Aberdare to Richmond upon Thames is the third suggested route (172mi, 3h 47min) and costs 30 £.
For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).
How to get from Aberdare to Richmond upon Thames?
There are three suggested routes. The fastest route is 164mi (distance from Aberdare to Richmond upon Thames) and its duration is 2h 60min. The other route is 169mi, and its duration is 3h 22min. The slowest route is 172mi, and its duration is 3h 47min.
RouteCalculator provides you with the information to prepare your trip from Aberdare to Richmond upon Thames by car or motorbike. It offers you alternative road routes that you can follow to go from Aberdare to Richmond upon Thames. It provides driving directions from Aberdare to Richmond upon Thames, i.e. where to turn and when, distance of the Aberdare - Richmond upon Thames route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.
In case you share the journey (carpooling) from Aberdare to Richmond upon Thames with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.
Where is Aberdare located?
Aberdare is located in Aberdare county and in Wales. It is situated at an altitude of 145 meters above sea level. Aberdare has coordinates 51.7161540o,-3.4518160o. RouteCalculator provides a map of Aberdare from which you can plan your trips to other UK cities.
What is the location of Richmond upon Thames?
Richmond upon Thames is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Richmond upon Thames has coordinates 51.4613110o,-0.3037420o. RouteCalculator provides a map of Richmond upon Thames from which you can plan your trips to other UK cities.
- Route from Aberdare to Richmondshire
- Distance from Aberdare to Rochdale
- Route from Aberdare to Rochford
- Distance from Aberdare to Rossendale
- Miles from Aberdare to Rother
- How far is from Aberdare to Rotherham
- Route from Aberdare to Rugby
- Distance from Aberdare to Runnymede
- Distance from Aberdare to Rushcliffe
