Route from Ashford to Clydebank
The distance between Ashford and Clydebank is 471 miles. Travel time is 7 hours and 53 minutes.
Driving directions from Ashford to Clydebank
How much does it cost to drive from Ashford to Clydebank?
If you're using petrol, it's gonna set you back 81.6 quid. In this calculation, they're saying the petrol price is 143 pence per liter, and the car's gonna guzzle down 37.5 miles for every gallon of that stuff.
Now, if you're carpooling, the cost gets split up between everyone riding. So, if there are two people in the car, it's gonna be 40.8 quid each (£81.6 divided by 2). With three buddies on board, it works out to around 27.2 quid per person (£81.6 divided by 3). And if you've got a full car with four people, it's only 20.4 quid per person (£81.6 divided by 4).
Breaking down the numbers, the fuel cost is calculated based on how far you're going and how much gas your car chugs. For this trip, you're gonna need about 57.1 liters of fuel. They figured that out by dividing the distance of 470.7 miles by the car's fuel consumption rate of 37.5 miles per gallon, and then converting that to liters 'cause, you know, the UK uses liters.
So, you take the fuel needed, which is 57.1 liters, and you multiply it by the price per liter, which is 143 pence. And voilà, you got yourself the total fuel cost for the trip from Ashford to Clydebank: 81.6 quid.
Diesel cost from Ashford to Clydebank.
The trip with diesel fuel costs 51.5 £ (151p/lt, 62.7 mpg).
For 2 passengers: 25.75 £ (51.5/2) /p.
For 3 passengers: 17.17 £ (51.5/3) /p.
For 4 passengers: 12.88 £ (51.5/4) /p.
For these reasons, diesel cars use less fuel than petrol cars:
Diesel fuel has more energy per litre than petrol. Diesel engines can drive farther and provide more power for the same fuel volume, reducing fuel consumption.
Diesel engines have higher compression ratios than petrol engines, increasing thermal efficiency. Diesel engines get more energy from each fuel unit due to this increased compression ratio. Because diesel engines are thermally efficient, they use less fuel.
Diesel engines create more torque at lower RPM than petrol engines. Diesel vehicles require less throttle input to maintain speed, which improves fuel efficiency, especially during steady-state driving.
Diesel cars consume less fuel than petrol cars due to these considerations.
Alternative routes from Ashford to Clydebank
The slowest route from Ashford to the Clydebank is 465.42 miles and takes 8 hours and 2 minutes.
Which is the cheapest route from Ashford to Clydebank by car?
The cheapest route from Ashford to Clydebank is the second suggested route (465mi, 8h 2min) and costs 80.7 £ (petrol fuel cost, 143p/lt, 37.5mpg).
The most expensive route from Ashford to Clydebank is the first suggested route (471mi, 7h 53min) and costs 81.6 £.
For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).
How to get from Ashford to Clydebank?
There are two suggested routes. The fastest route is 471mi (distance from Ashford to Clydebank) and its duration is 7h 53min. The slowest route is 465mi, and its duration is 8h 2min.
RouteCalculator provides you with the information to prepare your trip from Ashford to Clydebank by car or motorbike. It offers you alternative road routes that you can follow to go from Ashford to Clydebank. It provides driving directions from Ashford to Clydebank, i.e. where to turn and when, distance of the Ashford - Clydebank route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.
In case you share the journey (carpooling) from Ashford to Clydebank with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.
Where is Ashford located?
Ashford is located in Kent county and in England. It is situated at an altitude of 46 meters above sea level. Ashford has coordinates 51.1464659o,0.8750190o. RouteCalculator provides a map of Ashford from which you can plan your trips to other UK cities.
What is the location of Clydebank?
Clydebank is located in West Dunbartonshire county and in Scotland. It is situated at an altitude of 8 meters above sea level. Clydebank has coordinates 55.9000990o,-4.4047740o. RouteCalculator provides a map of Clydebank from which you can plan your trips to other UK cities.
- Route from Ashford to Coatbridge
- Distance from Ashford to Colchester
- Route from Ashford to Colwyn Bay
- Distance from Ashford to Copeland
- Miles from Ashford to Corby
- How far is from Ashford to Cornwall
- Route from Ashford to Cotswold
- Distance from Ashford to County Durham
- Distance from Ashford to Coventry