Ashford Runnymede by car, distance and driving time

The distance between Ashford and Runnymede by car is 79 miles. The driving time is 1 hour and 20 minutes.

How far is Runnymede from Ashford? The driving distance is 79 miles, depending on the selected route and traffic conditions.

From: Ashford, County: Kent, England
To: Runnymede, County: Surrey, England
79 mi , 1 h 20 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Ashford to Runnymede on map



Driving directions from Ashford to Runnymede

79 mi 1 h 20 min
1.
Head northeast on Station Road (A2042)
898 ft
2.
Continue onto Wellesley Road (A2042)
349 ft
3.
Turn left onto Park Street
500 ft
4.
Continue slightly right
0.3 mi
5.
Turn left onto Somerset Road (A292)
115 ft
6.
Continue right onto New Street (A292)
725 ft
7.
Enter the roundabout and take the 2nd exit onto Chart Road (A292)
52 ft
8.
Exit the roundabout onto Chart Road (A292)
775 ft
9.
Turn right onto A292
259 ft
10.
Turn left onto Maidstone Road (A292)
0.3 mi
11.
Enter Drovers Roundabout and take the 3rd exit onto Fougeres Way (A20)
436 ft
12.
Exit the roundabout onto Fougeres Way (A20)
0.3 mi
13.
Enter Drovers Interchange and take the 1st exit
21 ft
14.
Exit the roundabout
0.4 mi
15.
Merge right onto M20
24.9 mi
16.
Keep left towards Gatwick
10 mi
17.
Merge right onto M25
38.5 mi
18.
Take the ramp on the left towards A30: London (W)
856 ft
19.
Go straight onto A30
1105 ft
20.
Enter Runnymede Roundabout and take the 4th exit onto A30
0.3 mi
21.
Exit the roundabout onto A30
1094 ft
22.
Take the ramp on the right towards M25
2.4 mi
23.
You have arrived at your destination, on the left
0 ft


How much is the expense of driving from Ashford to Runnymede?

The expense of driving from Ashford to Runnymede, using petrol as the fuel source, amounts to £13.8. This calculation derives from considering the petrol price as 144 pence per liter and the car's fuel efficiency at 37.5 miles per gallon. When carpooling with two passengers, the cost of the trip per passenger is halved to £6.9 (£13.8 divided by 2). With three passengers, the expense drops to approximately £4.6 per passenger (£13.8 divided by 3), and with four passengers, it's reduced further to £3.45 per passenger (£13.8 divided by 4).

To delve into the details of the calculations, the fuel cost computation is reliant on the distance traveled and the car's fuel consumption rate. For the journey from Ashford to Runnymede, approximately 9.5 liters of fuel would be required. This amount is determined by dividing the distance of 78.78 miles by the car's fuel consumption rate of 37.5 miles per gallon, and then converting from gallons to liters using the conversion factor of 4.54609 liters per gallon.

Multiplying the fuel needed by the petrol price per liter results in the total fuel cost of £13.8 for the trip. This breakdown illustrates the impact of various factors, such as fuel price and consumption rate, on the overall cost of the journey, providing insights for individuals planning similar trips and requiring budget estimates.
 

Diesel cost from Ashford to Runnymede.

The trip with diesel fuel costs 9.5 £ (167p/lt, 62.7 mpg).
For 2 passengers: 4.75 £ (9.5/2) /p.
For 3 passengers: 3.17 £ (9.5/3) /p.
For 4 passengers: 2.38 £ (9.5/4) /p.

Alternative routes from Ashford to Runnymede

The most time-consuming route from Ashford to Runnymede spans a distance of 83.92 miles and requires a travel time of 2 hours and 8 minutes.

Which is the cheapest route from Ashford to Runnymede by car?

The cheapest route from Ashford to Runnymede is the first suggested route (79mi, 1h 20min) and costs 13.8 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The most expensive route from Ashford to Runnymede is the second suggested route (84mi, 2h 8min) and costs 14.6 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Ashford to Runnymede?

There are two suggested routes. The fastest route is 79mi (distance from Ashford to Runnymede) and its duration is 1h 20min. The slowest route is 84mi, and its duration is 2h 8min.

RouteCalculator provides you with the information to prepare your trip from Ashford to Runnymede by car or motorbike. It offers you alternative road routes that you can follow to go from Ashford to Runnymede. It provides driving directions from Ashford to Runnymede, i.e. where to turn and when, distance of the Ashford - Runnymede route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Ashford to Runnymede with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Ashford located?

Ashford is located in Kent county and in England. It is situated at an altitude of 46 meters above sea level. Ashford has coordinates 51.1464659o,0.8750190o. RouteCalculator provides a map of Ashford from which you can plan your trips to other UK cities.

What is the location of Runnymede?

Runnymede is located in Surrey county and in England. It is situated at an altitude of 17 meters above sea level. Runnymede has coordinates 51.4087193o,-0.5405585o. RouteCalculator provides a map of Runnymede from which you can plan your trips to other UK cities.