Route from Barnsley to Redcar and Cleveland
The distance between Barnsley and Redcar and Cleveland is 92 miles. Travel time is 1 hour and 34 minutes.
To: Redcar and Cleveland, County: North Yorkshire, EnglandDriving directions from Barnsley to Redcar and Cleveland
How much does it cost to drive from Barnsley to Redcar and Cleveland with petrol?
Driving from Barnsley to Redcar and Cleveland costs £16 with petrol. The calculation assumes a petrol price of 144 pence per liter and a car's petrol consumption of 37.5 miles per gallon. Carpooling with two passengers brings the cost down to £8 per person. With three passengers, it's £5.33 per person, and with four passengers, it's £4 per person. The fuel cost for the trip is derived from the distance and car fuel consumption, totaling 11.1 liters of fuel. This results in a £16 fuel cost for the journey.
Diesel cost from Barnsley to Redcar and Cleveland.
The trip with diesel fuel costs 11.1 £ (167p/lt, 62.7 mpg).
For 2 passengers: 5.55 £ (11.1/2) /p.
For 3 passengers: 3.7 £ (11.1/3) /p.
For 4 passengers: 2.78 £ (11.1/4) /p.
Alternative routes from Barnsley to Redcar and Cleveland
The second route from Barnsley to the Redcar and Cleveland is 94.2 miles and takes 1 hour and 40 minutes.
The third route from Barnsley to the Redcar and Cleveland is 96.74 miles and takes 1 hour and 53 minutes.
Which is the cheapest route from Barnsley to Redcar and Cleveland by car?
The cheapest route from Barnsley to Redcar and Cleveland is the first suggested route (92mi, 1h 34min) and costs 16 £ (petrol fuel cost, 144p/lt, 37.5mpg).
The second cheapest route from Barnsley to Redcar and Cleveland is the second suggested route (94mi, 1h 40min) and costs 16.4 £.
The most expensive route from Barnsley to Redcar and Cleveland is the third suggested route (97mi, 1h 53min) and costs 16.9 £.
For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).
How to get from Barnsley to Redcar and Cleveland?
There are three suggested routes. The fastest route is 92mi (distance from Barnsley to Redcar and Cleveland) and its duration is 1h 34min. The other route is 94mi, and its duration is 1h 40min. The slowest route is 97mi, and its duration is 1h 53min.
RouteCalculator provides you with the information to prepare your trip from Barnsley to Redcar and Cleveland by car or motorbike. It offers you alternative road routes that you can follow to go from Barnsley to Redcar and Cleveland. It provides driving directions from Barnsley to Redcar and Cleveland, i.e. where to turn and when, distance of the Barnsley - Redcar and Cleveland route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.
In case you share the journey (carpooling) from Barnsley to Redcar and Cleveland with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.
Where is Barnsley located?
Barnsley is located in South Yorkshire county and in England. It is situated at an altitude of 97 meters above sea level. Barnsley has coordinates 53.5526300o,-1.4797260o. RouteCalculator provides a map of Barnsley from which you can plan your trips to other UK cities.
What is the location of Redcar and Cleveland?
Redcar and Cleveland is located in North Yorkshire county and in England. It is situated at an altitude of 13 meters above sea level. Redcar and Cleveland has coordinates 54.5971344o,-1.0775997o. RouteCalculator provides a map of Redcar and Cleveland from which you can plan your trips to other UK cities.
- Route from Barnsley to Redditch
- Distance from Barnsley to Reigate and Banstead
- Route from Barnsley to Renfrew
- Distance from Barnsley to Rhyl
- Miles from Barnsley to Ribble Valley
- How far is from Barnsley to Richmond upon Thames
- Route from Barnsley to Richmondshire
- Distance from Barnsley to Rochdale
- Distance from Barnsley to Rochford
