Route from Bearsden to Bexley
The distance between Bearsden and Bexley is 437 miles. Travel time is 7 hours and 19 minutes.
Driving directions from Bearsden to Bexley
If you were to travel from Bearsden to Bexley, how much would it charge you?
A trip with petrol gasoline will cost you 75.8 pounds. According to the figure presented above, the price of petrol corresponds to 143 pence per litre, and the amount of petrol that the vehicle consumes is equivalent to 37.5 miles per gallon.
Through carpooling, the cost of this trip is 37.9 pounds for each of the two passengers.
When there are three people in the automobile, the cost of this trip is 25.27 pounds (75.8/3) for each individual passenger.
This trip will cost you 18.95 pounds for each of the four people who are travelling in the automobile.
The cost of fuel is equal to (437.29 miles / 37.5 miles per gallon) multiplied by 143 pence a litre, which is 75.8 pounds.
A more in-depth explanation of the result is as follows:
Fuel usage is miles multiplied by 4.54609 divided by the distance travelled by the vehicle.Consumption is 437.29 miles multiplied by 4.54609 divided by 37.5 miles per gallon, which equals 53 litres
It takes 53 litres of fuel.
The cost of fuel is equal to the amount of fuel required multiplied by the price per litre, which is 53 litres multiplied by 143 pence a litre, which is 75.8 pounds.
The cost of fuel from Bearsden to Bexley is 75.8 pounds.
Diesel cost from Bearsden to Bexley.
The trip with diesel fuel costs 47.9 £ (151p/lt, 62.7 mpg).
For 2 passengers: 23.95 £ (47.9/2) /p.
For 3 passengers: 15.97 £ (47.9/3) /p.
For 4 passengers: 11.98 £ (47.9/4) /p.
Significant factors contributing to diesel cars generally having lower fuel consumption than petrol cars are:
-
Higher Thermal Efficiency: Diesel engines typically operate at higher compression ratios than petrol engines. This higher compression ratio allows diesel engines to extract more energy from each unit of fuel, resulting in greater thermal efficiency. As a result, diesel vehicles can achieve better fuel economy compared to petrol vehicles.
-
More Torque at Lower RPM: Diesel engines tend to produce more torque at lower engine speeds (RPM) compared to petrol engines. This characteristic enables diesel vehicles to perform more efficiently during steady-state driving conditions, requiring less throttle input to maintain speed. Consequently, diesel cars often exhibit lower fuel consumption, especially in highway driving scenarios.
Alternative routes from Bearsden to Bexley
The second route from Bearsden to the Bexley is 431.4 miles and takes 7 hours and 26 minutes.
Which is the cheapest route from Bearsden to Bexley by car?
The cheapest route from Bearsden to Bexley is the second suggested route (431mi, 7h 26min) and costs 74.8 £ (petrol fuel cost, 143p/lt, 37.5mpg).
The most expensive route from Bearsden to Bexley is the first suggested route (437mi, 7h 19min) and costs 75.8 £.
For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).
How to get from Bearsden to Bexley?
There are two suggested routes. The fastest route is 437mi (distance from Bearsden to Bexley) and its duration is 7h 19min. The slowest route is 431mi, and its duration is 7h 26min.
RouteCalculator provides you with the information to prepare your trip from Bearsden to Bexley by car or motorbike. It offers you alternative road routes that you can follow to go from Bearsden to Bexley. It provides driving directions from Bearsden to Bexley, i.e. where to turn and when, distance of the Bearsden - Bexley route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.
In case you share the journey (carpooling) from Bearsden to Bexley with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.
Where is Bearsden located?
Bearsden is located in East Dunbartonshire county and in Scotland. It is situated at an altitude of 61 meters above sea level. Bearsden has coordinates 55.9216900o,-4.3355250o. RouteCalculator provides a map of Bearsden from which you can plan your trips to other UK cities.
What is the location of Bexley?
Bexley is located in Greater London county and in England. It is situated at an altitude of 39 meters above sea level. Bexley has coordinates 51.4519021o,0.1171786o. RouteCalculator provides a map of Bexley from which you can plan your trips to other UK cities.
- Route from Bearsden to Birmingham
- Distance from Bearsden to Bishopbriggs
- Route from Bearsden to Blaby
- Distance from Bearsden to Blackburn with Darwen
- Miles from Bearsden to Blackpool
- How far is from Bearsden to Blackwood
- Route from Bearsden to Bolsover
- Distance from Bearsden to Bolton
- Distance from Bearsden to Boston