Route from Bedford to Clydebank

The distance between Bedford and Clydebank is 374 miles. Travel time is 6 hours and 16 minutes.

From: Bedford, County: Bedfordshire, England
To: Clydebank, County: West Dunbartonshire, Scotland
374 mi , 6 h 16 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Bedford to Clydebank on map



Driving directions from Bedford to Clydebank

374 mi 6 h 16 min
1.
Head east on St Paul's Square (A600)
75 ft
2.
Turn right onto High Street (A600)
628 ft
3.
Continue onto St Mary's Street (A600)
607 ft
4.
Continue onto St John's Street (A600)
736 ft
5.
Enter the roundabout and take the 3rd exit onto Ampthill Road (A5140)
310 ft
6.
Exit the roundabout onto Ampthill Road (A5140)
1.7 mi
7.
Enter Elstow Interchange and take the 3rd exit
694 ft
8.
Exit the roundabout
0.3 mi
9.
Merge right onto Bedford Southern Bypass (A421)
8.1 mi
10.
Keep left onto A421
1059 ft
11.
Enter Ridgmont Interchange and take the 1st exit towards M1: The North
19 ft
12.
Exit the roundabout towards M1: The North
0.4 mi
13.
Merge right onto M1
31.4 mi
14.
Keep right onto M1
5.1 mi
15.
Take the ramp on the left towards M6: The N. WEST
22.8 mi
16.
Keep left onto M6
14.2 mi
17.
Keep right onto M6
7.9 mi
18.
Keep right onto M6
72 mi
19.
Keep right onto M6
116 mi
20.
Continue onto A74(M)
48.9 mi
21.
Continue onto M74
36.7 mi
22.
Take exit 1 on the left towards Kinning Park
1187 ft
23.
Keep left towards Kinning Park
232 ft
24.
Make a slight left onto Carnoustie Street
20 ft
25.
Turn left onto Scotland Street
974 ft
26.
Continue slightly left onto West Street
663 ft
27.
Take the ramp on the left towards M8 East: City Centre
0.3 mi
28.
Continue onto Kingston Bridge
1275 ft
29.
Keep left towards A814: Clydebank
1132 ft
30.
Go straight onto Clydeside Expressway (A814)
3.1 mi
31.
Enter the roundabout and take the 2nd exit onto Dumbarton Road (A814)
59 ft
32.
Exit the roundabout onto Dumbarton Road (A814)
2 mi
33.
Continue onto Glasgow Road (A814)
1 mi
34.
Turn right onto Kilbowie Road (A8014)
480 ft
35.
Turn right onto Chalmers Street
219 ft
36.
Continue right onto Alexander Street
397 ft
37.
You have arrived at your destination, on the left
0 ft


If you were to travel from Bedford to Clydebank, how much would it charge you?

A trip with petrol gasoline will cost you 64.8 pounds. According to the figure presented above, the price of petrol corresponds to 143 pence per litre, and the amount of petrol that the vehicle consumes is equivalent to 37.5 miles per gallon.
Through carpooling, the cost of this trip is 32.4 pounds for each of the two passengers.
When there are three people in the automobile, the cost of this trip is 21.6 pounds (64.8/3) for each individual passenger.
This trip will cost you 16.2 pounds for each of the four people who are travelling in the automobile.


The cost of fuel is equal to (373.67 miles / 37.5 miles per gallon) multiplied by 143 pence a litre, which is 64.8 pounds.

A more in-depth explanation of the result is as follows:

Fuel usage is miles multiplied by 4.54609 divided by the distance travelled by the vehicle.Consumption is 373.67 miles multiplied by 4.54609 divided by 37.5 miles per gallon, which equals 45.3 litres

It takes 45.3 litres of fuel.

The cost of fuel is equal to the amount of fuel required multiplied by the price per litre, which is 45.3 litres multiplied by 143 pence a litre, which is 64.8 pounds.

The cost of fuel from Bedford to Clydebank is 64.8 pounds.
 

Diesel cost from Bedford to Clydebank.

The trip with diesel fuel costs 40.9 £ (151p/lt, 62.7 mpg).
For 2 passengers: 20.45 £ (40.9/2) /p.
For 3 passengers: 13.63 £ (40.9/3) /p.
For 4 passengers: 10.23 £ (40.9/4) /p.

Diesel fuel and petrol fuel in terms of greater torque at lower RPM:

  • Diesel Fuel: Diesel engines typically produce more torque at lower engine speeds (RPM) compared to petrol engines. This characteristic is due to the inherent design differences between diesel and petrol engines, particularly in their combustion processes and fuel properties. Diesel engines operate on compression ignition, where the air-fuel mixture ignites spontaneously under high pressure and temperature, allowing them to generate high torque even at low RPMs. This characteristic makes diesel vehicles well-suited for tasks requiring high pulling power, such as towing or hauling heavy loads, as they can deliver ample torque at low engine speeds.

  • Petrol (Gasoline): Petrol engines generally produce less torque at lower RPMs compared to diesel engines. While petrol engines can also deliver torque, they often require higher engine speeds to reach their maximum torque output. Petrol engines rely on spark ignition, where the air-fuel mixture is ignited by a spark plug, and this combustion process may not generate as much torque at lower engine speeds as compression ignition in diesel engines. However, advancements in petrol engine technology, such as turbocharging and variable valve timing, have improved torque delivery across a broader RPM range in modern petrol vehicles.

Where is Bedford located?

Bedford is located in Bedfordshire county and in England. It is situated at an altitude of 34 meters above sea level. Bedford has coordinates 52.1359729o,-0.4666546o. RouteCalculator provides a map of Bedford from which you can plan your trips to other UK cities.

What is the location of Clydebank?

Clydebank is located in West Dunbartonshire county and in Scotland. It is situated at an altitude of 8 meters above sea level. Clydebank has coordinates 55.9000990o,-4.4047740o. RouteCalculator provides a map of Clydebank from which you can plan your trips to other UK cities.