Route from Bexley to Thanet

The distance between Bexley and Thanet is 61.6 miles. Travel time is 1 hour and 3 minutes.

From: Bexley, County: Greater London, England
To: Thanet, County: Kent, England
61.6 mi , 1 h 3 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Bexley to Thanet on map



Driving directions from Bexley to Thanet

61.6 mi 1 h 3 min
1.
Head east
548 ft
2.
Continue left onto Lakeside Close
608 ft
3.
Enter Danson Lane and take the 2nd exit onto Lodge Lane
121 ft
4.
Exit the roundabout onto Lodge Lane
443 ft
5.
Take the ramp
679 ft
6.
Merge right onto East Rochester Way (A2)
2.1 mi
7.
Continue onto Dartford Bypass (A2)
5.8 mi
8.
Continue onto Watling Street (A2)
6.4 mi
9.
Continue onto M2
25.8 mi
10.
Continue onto Thanet Way (A299)
11.7 mi
11.
Take the ramp on the left
0.3 mi
12.
Continue straight
0.5 mi
13.
Merge right onto Thanet Way (A299)
3.6 mi
14.
Enter St Nicholas-at-Wade Roundabout and take the 3rd exit onto Thanet Way (A299)
278 ft
15.
Exit the roundabout onto Thanet Way (A299)
1 mi
16.
Enter Monkton Roundabout and take the 2nd exit onto Canterbury Road West (A299)
147 ft
17.
Exit the roundabout onto Canterbury Road West (A299)
1.6 mi
18.
Enter Minster Roundabout and take the 1st exit onto Minster Road (B2190)
39 ft
19.
Exit the roundabout onto Minster Road (B2190)
1096 ft
20.
Enter the roundabout and take the 2nd exit onto B2190
167 ft
21.
Exit the roundabout onto B2190
585 ft
22.
Enter the roundabout and take the 2nd exit onto Spitfire Way (B2190)
167 ft
23.
Exit the roundabout onto Spitfire Way (B2190)
0.4 mi
24.
Turn left onto Alland Grange Lane
0.7 mi
25.
Continue onto Woodchurch Road
0.6 mi
26.
Make a slight right
173 ft
27.
You have arrived at your destination, on the right
0 ft


If you were to travel from Bexley to Thanet, how much would it charge you?

A trip with petrol gasoline will cost you 10.8 pounds. According to the figure presented above, the price of petrol corresponds to 144 pence per litre, and the amount of petrol that the vehicle consumes is equivalent to 37.5 miles per gallon.
Through carpooling, the cost of this trip is 5.4 pounds for each of the two passengers.
When there are three people in the automobile, the cost of this trip is 3.6 pounds (10.8/3) for each individual passenger.
This trip will cost you 2.7 pounds for each of the four people who are travelling in the automobile.


The cost of fuel is equal to (61.62 miles / 37.5 miles per gallon) multiplied by 144 pence a litre, which is 10.8 pounds.

A more in-depth explanation of the result is as follows:

Fuel usage is miles multiplied by 4.54609 divided by the distance travelled by the vehicle.Consumption is 61.62 miles multiplied by 4.54609 divided by 37.5 miles per gallon, which equals 7.5 litres

It takes 7.5 litres of fuel.

The cost of fuel is equal to the amount of fuel required multiplied by the price per litre, which is 7.5 litres multiplied by 144 pence a litre, which is 10.8 pounds.

The cost of fuel from Bexley to Thanet is 10.8 pounds.
 

Diesel cost from Bexley to Thanet.

The trip with diesel fuel costs 7.5 £ (167p/lt, 62.7 mpg).
For 2 passengers: 3.75 £ (7.5/2) /p.
For 3 passengers: 2.5 £ (7.5/3) /p.
For 4 passengers: 1.88 £ (7.5/4) /p.

When comparing diesel fuel and petrol (gasoline) fuel in terms of octane rating, there's a significant distinction:

  1. Petrol:

    • Petrol typically has an octane rating ranging from 87 to 95 in most markets.

    • Octane rating measures the fuel's resistance to premature detonation or knocking in spark-ignition engines.

    • Higher octane ratings are crucial for high-performance petrol engines with higher compression ratios or turbocharging, as they help prevent engine knocking and allow for more efficient combustion.

  2. Diesel Fuel:

    • Diesel fuel doesn't have an octane rating in the same sense as petrol because it's not used in spark-ignition engines.

    • Diesel engines rely on compression ignition rather than spark ignition, meaning the fuel-air mixture ignites spontaneously due to high pressure and temperature.

    • Therefore, diesel fuel is designed to ignite under the high compression conditions found in diesel engines, and its properties are optimized for this type of combustion rather than for octane rating.

In essence, while petrol relies on octane rating to ensure proper combustion in spark-ignition engines, diesel fuel is formulated to ignite under the high-pressure conditions of compression ignition in diesel engines, rendering octane rating irrelevant for diesel fuel.

 

 

 


 

Alternative routes from Bexley to Thanet

An alternative route from Bexley to the Thanet is 61.64 miles and takes 1 hour and 20 minutes.

Which is the cheapest route from Bexley to Thanet by car?

The cheapest route from Bexley to Thanet is the suggested route (0ft, ) and costs £ (petrol fuel cost, 144p/lt, 37.5mpg).

The most expensive route from Bexley to Thanet is the suggested route (0ft, ) and costs £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Bexley to Thanet?

There are two suggested routes. The fastest route is 61.6mi (distance from Bexley to Thanet) and its duration is 1h 3min. The slowest route is 61.6mi, and its duration is 1h 20min.

RouteCalculator provides you with the information to prepare your trip from Bexley to Thanet by car or motorbike. It offers you alternative road routes that you can follow to go from Bexley to Thanet. It provides driving directions from Bexley to Thanet, i.e. where to turn and when, distance of the Bexley - Thanet route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Bexley to Thanet with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Bexley located?

Bexley is located in Greater London county and in England. It is situated at an altitude of 39 meters above sea level. Bexley has coordinates 51.4519021o,0.1171786o. RouteCalculator provides a map of Bexley from which you can plan your trips to other UK cities.

What is the location of Thanet?

Thanet is located in Kent county and in England. It is situated at an altitude of 32 meters above sea level. Thanet has coordinates 51.3602516o,1.3484663o. RouteCalculator provides a map of Thanet from which you can plan your trips to other UK cities.