Route from Blaby to Barking and Dagenham
The distance between Blaby and Barking and Dagenham is 107 miles. Travel time is 2 hours and .

Driving directions from Blaby to Barking and Dagenham
How much does it cost to drive from Blaby to Barking and Dagenham with petrol?
Let's delve into the expenses of a road trip from Blaby to Barking and Dagenham. The journey using petrol will set you back 18.6 pounds. Now, let's walk through how we arrived at this figure.
Firstly, we consider the price of petrol, which is 143 pence per liter. Next, we take into account the car's fuel consumption rate, which stands at 37.5 miles per gallon.
Now, suppose you're carpooling. If there are two passengers sharing the ride, each person will contribute 9.3 pounds (£18.6 divided by 2). With three passengers, the cost per person drops to around 6.2 pounds (£18.6 divided by 3). And if there are four passengers onboard, each person chips in 4.65 pounds (£18.6 divided by 4).
Let's delve deeper into the calculations. To determine how much fuel is needed for the trip, we rely on the distance and the car's fuel efficiency. The distance between Blaby and Barking and Dagenham is approximately 107.23 miles. So, to cover this distance, the car will require roughly 13 liters of petrol. We obtained this value by dividing the distance by the car's fuel consumption rate of 37.5 miles per gallon and then converting it to liters.
Once we have the amount of fuel needed, we calculate the total cost. Multiplying the fuel quantity (13 liters) by the price per liter (143 pence) yields 18.6 pounds. Therefore, the fuel cost for the journey from Blaby to Barking and Dagenham is 18.6 pounds.
Diesel cost from Blaby to Barking and Dagenham.
The trip with diesel fuel costs 11.7 £ (151p/lt, 62.7 mpg).
For 2 passengers: 5.85 £ (11.7/2) /p.
For 3 passengers: 3.9 £ (11.7/3) /p.
For 4 passengers: 2.93 £ (11.7/4) /p.
Diesel cars generally have lower fuel consumption compared to petrol cars for the following reasons:
-
Higher Energy Density of Diesel Fuel: Diesel fuel contains more energy per liter compared to petrol. This means that for the same volume of fuel, diesel engines can generate more power and travel a greater distance, resulting in lower fuel consumption.
-
Increased Thermal Efficiency of Diesel Engines: Diesel engines operate at higher compression ratios compared to petrol engines. This higher compression ratio allows diesel engines to extract more energy from each unit of fuel. As a result, diesel engines are typically more thermally efficient, translating into lower fuel consumption.
-
Greater Torque at Lower RPM: Diesel engines tend to produce more torque at lower engine speeds (RPM) compared to petrol engines. This characteristic allows diesel vehicles to maintain better fuel efficiency, particularly during steady-state cruising, as they require less throttle input to maintain speed.
These factors combined contribute to the generally lower fuel consumption observed in diesel cars compared to their petrol counterparts.
Alternative routes from Blaby to Barking and Dagenham
The second route from Blaby to the Barking and Dagenham is 128.65 miles and takes 2 hours and 16 minutes.
The third route from Blaby to the Barking and Dagenham is 106.35 miles and takes 2 hours and 27 minutes.
Which is the cheapest route from Blaby to Barking and Dagenham by car?
The cheapest route from Blaby to Barking and Dagenham is the third suggested route (106mi, 2h 27min) and costs 18.4 £ (petrol fuel cost, 143p/lt, 37.5mpg).
The second cheapest route from Blaby to Barking and Dagenham is the first suggested route (107mi, 2h ) and costs 18.6 £.
The most expensive route from Blaby to Barking and Dagenham is the second suggested route (129mi, 2h 16min) and costs 22.3 £.
For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).
How to get from Blaby to Barking and Dagenham?
There are three suggested routes. The fastest route is 107mi (distance from Blaby to Barking and Dagenham) and its duration is 2h . The other route is 129mi, and its duration is 2h 16min. The slowest route is 106mi, and its duration is 2h 27min.
RouteCalculator provides you with the information to prepare your trip from Blaby to Barking and Dagenham by car or motorbike. It offers you alternative road routes that you can follow to go from Blaby to Barking and Dagenham. It provides driving directions from Blaby to Barking and Dagenham, i.e. where to turn and when, distance of the Blaby - Barking and Dagenham route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.
In case you share the journey (carpooling) from Blaby to Barking and Dagenham with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.
Where is Blaby located?
Blaby is located in Leicestershire county and in England. It is situated at an altitude of 72 meters above sea level. Blaby has coordinates 52.5707761o,-1.1656497o. RouteCalculator provides a map of Blaby from which you can plan your trips to other UK cities.
What is the location of Barking and Dagenham?
Barking and Dagenham is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Barking and Dagenham has coordinates 51.5464828o,0.1293497o. RouteCalculator provides a map of Barking and Dagenham from which you can plan your trips to other UK cities.
- Route from Blaby to Barnet
- Distance from Blaby to Barnsley
- Route from Blaby to Barrow-in-Furness
- Distance from Blaby to Barry
- Miles from Blaby to Basildon
- How far is from Blaby to Basingstoke and Deane
- Route from Blaby to Bassetlaw
- Distance from Blaby to Bath and North East Somerset
- Distance from Blaby to Bathgate