Route from Blackpool to Bradford

The distance between Blackpool and Bradford is 79 miles. Travel time is 1 hour and 26 minutes.

From: Blackpool, County: Lancashire, England
To: Bradford, County: West Yorkshire, England
79 mi , 1 h 26 min
Tolls: Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Blackpool to Bradford on map



Driving directions from Blackpool to Bradford

79 mi 1 h 26 min
1.
Head south
65 ft
2.
Turn left
91 ft
3.
Turn right onto Maple Avenue
113 ft
4.
Turn left onto Forest Gate
601 ft
5.
Turn right onto Beech Avenue
606 ft
6.
Enter the roundabout and take the 3rd exit onto West Park Drive
151 ft
7.
Exit the roundabout onto West Park Drive
0.6 mi
8.
Turn right onto South Park Drive (A587)
0.3 mi
9.
Turn left onto Preston New Road (A583)
0.5 mi
10.
Take the ramp
185 ft
11.
Turn right onto Cherry Tree Road North
692 ft
12.
Turn left onto Clifton Road
0.5 mi
13.
Turn right onto Ashworth Road
1008 ft
14.
Enter the roundabout and take the 1st exit onto A5230
24 ft
15.
Exit the roundabout onto A5230
0.4 mi
16.
Go straight onto M55
12.7 mi
17.
Keep right towards M6 South
5.8 mi
18.
Keep left onto M61
20.9 mi
19.
Keep left towards M60: Bury
4.3 mi
20.
Continue onto M62
27.4 mi
21.
Keep left onto M606
2.7 mi
22.
Take the ramp on the left onto M606
1143 ft
23.
Enter Staygate Roundabout and take the 3rd exit onto Rooley Lane (A6177)
244 ft
24.
Exit the roundabout onto Rooley Lane (A6177)
585 ft
25.
Continue onto Mayo Avenue (A6177)
0.4 mi
26.
Make a slight right
308 ft
27.
Turn right onto Manchester Road (A641)
1.4 mi
28.
Continue onto Prince's Way (A6181)
915 ft
29.
Continue onto Godwin Street (A6181)
421 ft
30.
Turn left onto Sunbridge Road (A6181)
323 ft
31.
Turn right onto Barry Street (A6181)
929 ft
32.
Turn left
81 ft
33.
You have arrived at your destination
0 ft


How much does it cost to drive from Blackpool to Bradford with petrol?

Let's delve into the expenses of a road trip from Blackpool to Bradford. The journey using petrol will set you back 13.8 pounds. Now, let's walk through how we arrived at this figure.

Firstly, we consider the price of petrol, which is 143 pence per liter. Next, we take into account the car's fuel consumption rate, which stands at 37.5 miles per gallon.

Now, suppose you're carpooling. If there are two passengers sharing the ride, each person will contribute 6.9 pounds (£13.8 divided by 2). With three passengers, the cost per person drops to around 4.6 pounds (£13.8 divided by 3). And if there are four passengers onboard, each person chips in 3.45 pounds (£13.8 divided by 4).

Let's delve deeper into the calculations. To determine how much fuel is needed for the trip, we rely on the distance and the car's fuel efficiency. The distance between Blackpool and Bradford is approximately 79.49 miles. So, to cover this distance, the car will require roughly 9.6 liters of petrol. We obtained this value by dividing the distance by the car's fuel consumption rate of 37.5 miles per gallon and then converting it to liters.

Once we have the amount of fuel needed, we calculate the total cost. Multiplying the fuel quantity (9.6 liters) by the price per liter (143 pence) yields 13.8 pounds. Therefore, the fuel cost for the journey from Blackpool to Bradford is 13.8 pounds.
 

 

How much fuel a car uses is directly related to how well its engine is oiled. How to do it: 

 

  • Efficiency: An engine that has been properly cared for and is in good shape works more efficiently, which means it can burn fuel more efficiently and use less of it to make the same amount of power. 
     
  • Combustion: If the fuel injectors are dirty, the air filters are jammed, or the spark plugs don't work right, the fuel may not burn all the way. This is called incomplete combustion. This wastes fuel and makes people use more of it. 
     
  • Fuel blend: For the engine to burn efficiently, the fuel-air blend needs to be carefully managed. Any changes from the right ratio, like when an oxygen monitor or fuel injector doesn't work right, can cause the engine to use more fuel than it should. 
     
  • Mechanical Wear: As an engine ages, parts inside it like piston rings, valves, and seals can wear out. This makes the engine less efficient and causes it to use more petrol. This wear can be lessened with regular upkeep, which can also help keep fuel use in check. 
     
  • Ignition Timing: If the ignition timing is off, it can cause inefficient combustion and higher fuel usage. This can be caused by a worn distributor or a broken ignition system. 
     

To sum up, the state of a car's engine is a major factor in how much fuel it uses. For the engine to work well and use little petrol, it needs to be serviced regularly and fixed quickly when something goes wrong.


Diesel cost from Blackpool to Bradford.

The trip with diesel fuel costs 8.7 £ (151p/lt, 62.7 mpg).
For 2 passengers: 4.35 £ (8.7/2) /p.
For 3 passengers: 2.9 £ (8.7/3) /p.
For 4 passengers: 2.18 £ (8.7/4) /p.


Alternative routes from Blackpool to Bradford

The second route from Blackpool to the Bradford is 66.77 miles and takes 1 hour and 27 minutes.

The third route from Blackpool to the Bradford is 68.85 miles and takes 1 hour and 38 minutes.


Which is the cheapest route from Blackpool to Bradford by car?

The cheapest route from Blackpool to Bradford is the second suggested route (67mi, 1h 27min) and costs 11.6 £ (petrol fuel cost, 143p/lt, 37.5mpg).

The second cheapest route from Blackpool to Bradford is the third suggested route (69mi, 1h 38min) and costs 11.9 £.

The most expensive route from Blackpool to Bradford is the first suggested route (79mi, 1h 26min) and costs 13.8 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).


How to get from Blackpool to Bradford?

There are three suggested routes. The fastest route is 79mi (distance from Blackpool to Bradford) and its duration is 1h 26min. The other route is 67mi, and its duration is 1h 27min. The slowest route is 69mi, and its duration is 1h 38min.

RouteCalculator provides you with the information to prepare your trip from Blackpool to Bradford by car or motorbike. It offers you alternative road routes that you can follow to go from Blackpool to Bradford. It provides driving directions from Blackpool to Bradford, i.e. where to turn and when, distance of the Blackpool - Bradford route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Blackpool to Bradford with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.


Where is Blackpool located?

Blackpool is located in Lancashire county and in England. It is situated at an altitude of 16 meters above sea level. Blackpool has coordinates 53.8175053o,-3.0356748o. RouteCalculator provides a map of Blackpool from which you can plan your trips to other UK cities.


What is the location of Bradford?

Bradford is located in West Yorkshire county and in England. It is situated at an altitude of 128 meters above sea level. Bradford has coordinates 53.7959840o,-1.7593980o. RouteCalculator provides a map of Bradford from which you can plan your trips to other UK cities.