Route from Bolsover to Stockton-on-Tees

The distance between Bolsover and Stockton-on-Tees is 107 miles. Travel time is 1 hour and 52 minutes.

From: Bolsover, County: Derbyshire, England
To: Stockton-on-Tees, County: Durham and North Yorkshire, England
107 mi , 1 h 52 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Bolsover to Stockton-on-Tees on map



Driving directions from Bolsover to Stockton-on-Tees

107 mi 1 h 52 min
1.
Head northwest on Oxcroft Lane
124 ft
2.
Turn right onto Longlands
369 ft
3.
Turn right onto Welbeck Road
962 ft
4.
Turn right onto A632
1 mi
5.
Enter the roundabout and take the 2nd exit onto Chesterfield Road (A632)
125 ft
6.
Exit the roundabout onto Chesterfield Road (A632)
0.7 mi
7.
Enter the roundabout and take the 1st exit onto Chesterfield Road (A632)
54 ft
8.
Exit the roundabout onto Chesterfield Road (A632)
0.3 mi
9.
Turn right onto Enterprise Way
0.7 mi
10.
Enter the roundabout and take the 2nd exit onto Erin Road (A6192)
117 ft
11.
Exit the roundabout onto Erin Road (A6192)
1087 ft
12.
Enter the roundabout and take the 2nd exit towards M1
170 ft
13.
Exit the roundabout towards M1
9.8 mi
14.
Keep left onto M18
8.7 mi
15.
Take the ramp on the left onto M18
1311 ft
16.
Keep left towards A1(M): The NORTH
765 ft
17.
Continue onto Doncaster By-pass (A1(M))
0.3 mi
18.
Merge right onto Doncaster By-pass (A1(M))
7.1 mi
19.
Continue onto Doncaster Bypass (A1(M))
8.2 mi
20.
Keep right onto A1(M)
35 mi
21.
Keep left towards A168: Thirsk
1.2 mi
22.
Continue onto A168
6.8 mi
23.
Continue onto A19
22.7 mi
24.
Take the ramp on the left towards A1130: Thornaby
1077 ft
25.
Keep left towards Thornaby
233 ft
26.
Make a slight left onto Acklam Road (A1130)
1.1 mi
27.
Enter the roundabout and take the 1st exit onto Mandale Road (A1130)
40 ft
28.
Exit the roundabout onto Mandale Road (A1130)
667 ft
29.
Enter the roundabout and take the 1st exit onto George Street (A1130)
100 ft
30.
Exit the roundabout onto George Street (A1130)
933 ft
31.
Keep right onto A1130
921 ft
32.
Make a slight left onto Victoria Bridge (A1130)
387 ft
33.
Continue onto Bridge Road (A1130)
0.3 mi
34.
Continue onto Churchyard Link Road (A1305)
565 ft
35.
Enter the roundabout and take the 2nd exit onto Prince Regent Street (A1305)
108 ft
36.
Exit the roundabout onto Prince Regent Street (A1305)
1098 ft
37.
Continue onto Nelson Terrace (A1305)
811 ft
38.
Continue onto Leeds Street (A1305)
515 ft
39.
Go straight onto Bishopton Lane
1038 ft
40.
Turn left onto Bishopton Road
0.4 mi
41.
You have arrived at your destination, on the right
0 ft


How much does it cost to drive from Bolsover to Stockton-on-Tees with petrol?

Let's delve into the expenses of a road trip from Bolsover to Stockton-on-Tees. The journey using petrol will set you back 18.5 pounds. Now, let's walk through how we arrived at this figure.

Firstly, we consider the price of petrol, which is 143 pence per liter. Next, we take into account the car's fuel consumption rate, which stands at 37.5 miles per gallon.

Now, suppose you're carpooling. If there are two passengers sharing the ride, each person will contribute 9.25 pounds (£18.5 divided by 2). With three passengers, the cost per person drops to around 6.17 pounds (£18.5 divided by 3). And if there are four passengers onboard, each person chips in 4.63 pounds (£18.5 divided by 4).

Let's delve deeper into the calculations. To determine how much fuel is needed for the trip, we rely on the distance and the car's fuel efficiency. The distance between Bolsover and Stockton-on-Tees is approximately 106.8 miles. So, to cover this distance, the car will require roughly 12.9 liters of petrol. We obtained this value by dividing the distance by the car's fuel consumption rate of 37.5 miles per gallon and then converting it to liters.

Once we have the amount of fuel needed, we calculate the total cost. Multiplying the fuel quantity (12.9 liters) by the price per liter (143 pence) yields 18.5 pounds. Therefore, the fuel cost for the journey from Bolsover to Stockton-on-Tees is 18.5 pounds.
 

 

Road conditions affect fuel usage for the following reasons:

Surface Roughness: Potholes, fissures, and uneven pavement increase rolling resistance. This makes the tires work harder to maintain speed, increasing fuel consumption.

Tire-road surface friction increases with poor road conditions. Friction causes drag, which makes the engine work harder. Therefore, fuel usage might rise, especially at high speeds.

Traffic Congestion: Heavy traffic causes stops and idling in traffic queues. Constant acceleration and deceleration might increase fuel consumption compared to open roadways.

Elevation Changes: Steep inclines or falls can effect fuel usage, especially for smaller engines. Uphill climbing takes more engine power and petrololine, whereas descending downhill may require more braking and fuel to regulate.

Rain, snow, and ice can impair road traction and vehicle stability. Adjusting speed and driving behavior can affect fuel consumption.

Good pavement and smooth roads use less fuel than rough or badly maintained roads. Smooth roads reduce rolling resistance and improve vehicle efficiency.

Road conditions greatly affect fuel use, so drivers' fuel economy may vary.

Diesel cost from Bolsover to Stockton-on-Tees.

The trip with diesel fuel costs 11.7 £ (151p/lt, 62.7 mpg).
For 2 passengers: 5.85 £ (11.7/2) /p.
For 3 passengers: 3.9 £ (11.7/3) /p.
For 4 passengers: 2.93 £ (11.7/4) /p.

Alternative routes from Bolsover to Stockton-on-Tees

The slowest route from Bolsover to the Stockton-on-Tees is 113.12 miles and takes 2 hours and 23 minutes.

Which is the cheapest route from Bolsover to Stockton-on-Tees by car?

The cheapest route from Bolsover to Stockton-on-Tees is the first suggested route (107mi, 1h 52min) and costs 18.5 £ (petrol fuel cost, 143p/lt, 37.5mpg).

The most expensive route from Bolsover to Stockton-on-Tees is the second suggested route (113mi, 2h 23min) and costs 19.6 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Bolsover to Stockton-on-Tees?

There are two suggested routes. The fastest route is 107mi (distance from Bolsover to Stockton-on-Tees) and its duration is 1h 52min. The slowest route is 113mi, and its duration is 2h 23min.

RouteCalculator provides you with the information to prepare your trip from Bolsover to Stockton-on-Tees by car or motorbike. It offers you alternative road routes that you can follow to go from Bolsover to Stockton-on-Tees. It provides driving directions from Bolsover to Stockton-on-Tees, i.e. where to turn and when, distance of the Bolsover - Stockton-on-Tees route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Bolsover to Stockton-on-Tees with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Bolsover located?

Bolsover is located in Derbyshire county and in England. It is situated at an altitude of 170 meters above sea level. Bolsover has coordinates 53.2310440o,-1.2897209o. RouteCalculator provides a map of Bolsover from which you can plan your trips to other UK cities.

What is the location of Stockton-on-Tees?

Stockton-on-Tees is located in Durham and North Yorkshire county and in England. It is situated at an altitude of 13 meters above sea level. Stockton-on-Tees has coordinates 54.5704551o,-1.3289821o. RouteCalculator provides a map of Stockton-on-Tees from which you can plan your trips to other UK cities.