Route from Brentwood to Southend-on-Sea

The distance between Brentwood and Southend-on-Sea is 21.1 miles. Travel time is 30 minutes.

From: Brentwood, County: Essex, England
To: Southend-on-Sea, County: Essex, England
21.1 mi , 30 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Brentwood to Southend-on-Sea on map



Driving directions from Brentwood to Southend-on-Sea

21.1 mi 30 min
1.
Head southeast on Ingrave Road (A128)
1086 ft
2.
Turn right onto Seven Arches Road
0.4 mi
3.
Continue onto Hartswood Road
0.9 mi
4.
Continue onto Childerditch Lane
0.8 mi
5.
Make a slight left to stay on Childerditch Lane
1.1 mi
6.
Take the ramp on the left towards A127
425 ft
7.
Merge right onto Southend Arterial Road (A127)
14 mi
8.
Continue onto Southend Arterial Road (A127)
1.1 mi
9.
Continue onto Prince Avenue (A127)
0.7 mi
10.
Merge right onto Tesco Roundabout
302 ft
11.
Keep left onto Prince Avenue (A127)
0.9 mi
12.
Enter Cuckoo Corner and take the 3rd exit onto Victoria Avenue (A127)
211 ft
13.
Exit the roundabout onto Victoria Avenue (A127)
0.8 mi
14.
Turn left onto Carnarvon Road
86 ft
15.
You have arrived at your destination, on the left
0 ft


What's the cost of a drive from Brentwood to Southend-on-Sea?

The journey, powered by petrol, sets you back £3.7. In this calculation, we're crunching numbers based on a petrol price of 144 pence per liter and a car's thirst of 37.5 miles per gallon. If you're carpooling with a buddy, that's £1.85 each (£3.7 divided by 2). With a trio onboard, it drops to around £1.23 a head (£3.7 divided by 3), and with a full car of four, it's a mere £0.93 per person (£3.7 divided by 4).

Let's dig into the math behind it. The fuel expenditure hinges on the distance covered and the car's efficiency. For this particular jaunt, you're looking at guzzling down roughly 2.6 liters of fuel. Crunching the numbers, that's where the £3.7 total comes from for the trip from Brentwood to Southend-on-Sea.
 

 

The state of the road might impact fuel usage due to many factors.

Surface roughness refers to the unevenness of road surfaces, which can be caused by potholes, fractures, or uneven pavement. This unevenness can lead to an increase in rolling resistance. Consequently, the tires must exert more effort to sustain velocity, resulting in increased fuel consumption.

Friction: The presence of inadequate road conditions can augment the level of friction between the tires and the road surface. The friction between surfaces generates drag, necessitating the engine to exert more effort to overcome it. Consequently, the use of fuel might escalate, particularly when driving at higher velocities.

Traffic congestion refers to the situation where roads experience a high volume of vehicles, resulting in frequent halts, starts, and prolonged waiting in traffic lines. The consistent acceleration and deceleration can result in higher fuel usage when compared to driving on uncongested, unrestricted roadways.

Changes in elevation can have an impact on fuel usage, particularly for vehicles equipped with less powerful engines, when encountering roads with steep inclines or drops. Ascending a slope necessitates greater engine power and consequently more fuel consumption, but descending a decline may necessitate additional braking and fuel usage to maintain control.

Weather Conditions: Inclement weather conditions, including precipitation such as rain, snow, or ice, can have a detrimental impact on road grip and the stability of vehicles. Motorists may be required to modify their velocity and driving conduct, which can have an effect on fuel usage.

Surface Quality: Smooth road surfaces with high-quality pavement often lead to decreased fuel consumption in comparison to rough or inadequately maintained roads. The reason for this is that smooth roads decrease rolling resistance, hence enabling more efficient vehicle performance.

In general, the quality of roads has a substantial impact on petrololine consumption, and drivers may encounter differences in fuel economy based on the state of the roads they are traveling on.

Diesel cost from Brentwood to Southend-on-Sea.

The trip with diesel fuel costs 2.6 £ (167p/lt, 62.7 mpg).
For 2 passengers: 1.3 £ (2.6/2) /p.
For 3 passengers: 0.87 £ (2.6/3) /p.
For 4 passengers: 0.65 £ (2.6/4) /p.

Where is Brentwood located?

Brentwood is located in Essex county and in England. It is situated at an altitude of 109 meters above sea level. Brentwood has coordinates 51.6204750o,0.3071749o. RouteCalculator provides a map of Brentwood from which you can plan your trips to other UK cities.

What is the location of Southend-on-Sea?

Southend-on-Sea is located in Essex county and in England. It is situated at an altitude of 29 meters above sea level. Southend-on-Sea has coordinates 51.5459269o,0.7077123o. RouteCalculator provides a map of Southend-on-Sea from which you can plan your trips to other UK cities.