Route from Broxbourne to Cannock Chase

The distance between Broxbourne and Cannock Chase is 127 miles. Travel time is 2 hours and 14 minutes.

From: Broxbourne, County: Hertfordshire, England
To: Cannock Chase, County: Staffordshire, England
127 mi , 2 h 14 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Broxbourne to Cannock Chase on map



Driving directions from Broxbourne to Cannock Chase

127 mi 2 h 14 min
1.
Head southwest on Ashbourne Road
798 ft
2.
Turn right onto High Road Broxbourne (A1170)
309 ft
3.
Enter the roundabout and take the 2nd exit onto Bell Lane
82 ft
4.
Exit the roundabout onto Bell Lane
0.3 mi
5.
Continue onto Baas Hill
0.6 mi
6.
Continue onto White Stubbs Lane
3.7 mi
7.
Turn left onto Newgate Street Village
0.3 mi
8.
Make a sharp right onto Tyler's Causeway
1.4 mi
9.
Continue onto Woodfield Lane
0.8 mi
10.
Turn left onto Kentish Lane (B158)
583 ft
11.
Turn right onto Grubbs Lane
0.7 mi
12.
Make a slight left onto Westfield
0.6 mi
13.
Turn right onto Great North Road (A1000)
0.5 mi
14.
Enter the roundabout and take the 2nd exit onto Great North Road (A1000)
123 ft
15.
Exit the roundabout onto Great North Road (A1000)
0.5 mi
16.
Keep right onto South Way (A1001)
0.4 mi
17.
Enter Travellers Lane Roundabout and take the 2nd exit onto South Way (A1001)
198 ft
18.
Exit the roundabout onto South Way (A1001)
0.7 mi
19.
Enter the roundabout and take the 2nd exit onto Roehyde Way (A1001)
146 ft
20.
Exit the roundabout onto Roehyde Way (A1001)
0.8 mi
21.
Enter Roehyde Interchange and take the 1st exit onto North Orbital Road (A414)
260 ft
22.
Exit the roundabout onto North Orbital Road (A414)
1.2 mi
23.
Keep left onto North Orbital (A414)
1.7 mi
24.
Enter London Colney Roundabout and take the 3rd exit onto North Orbital Road (A414)
455 ft
25.
Exit the roundabout onto North Orbital Road (A414)
1.9 mi
26.
Enter Park Street Roundabout and take the 3rd exit onto A414
352 ft
27.
Exit the roundabout onto A414
3.5 mi
28.
Take the ramp towards M1: The NORTH
53.6 mi
29.
Keep right onto M1
5.1 mi
30.
Take the ramp on the left towards M6: The N. WEST
22.8 mi
31.
Keep right onto M6 Toll
2.5 mi
32.
Merge right onto M42
2.4 mi
33.
Keep right onto M6 Toll
13.9 mi
34.
Take the ramp on the left
0.9 mi
35.
Enter the roundabout and take the 2nd exit onto Burntwood Way (A5195)
253 ft
36.
Exit the roundabout onto Burntwood Way (A5195)
1 mi
37.
Enter the roundabout and take the 1st exit onto A5190
97 ft
38.
Exit the roundabout onto A5190
0.7 mi
39.
Enter the roundabout and take the 3rd exit onto Cannock Road
254 ft
40.
Exit the roundabout onto Cannock Road
448 ft
41.
Enter the roundabout and take the 1st exit onto Stables Way
24 ft
42.
Exit the roundabout onto Stables Way
0.5 mi
43.
Enter the roundabout and take the 1st exit
89 ft
44.
Exit the roundabout
0.5 mi
45.
Continue onto Sevens Road
0.6 mi
46.
Continue onto Cannock Wood Road
0.5 mi
47.
Turn left onto Littleworth Road
0.3 mi
48.
Turn right onto Rawnsley Road
0.9 mi
49.
Turn right
234 ft
50.
You have arrived at your destination, straight ahead
0 ft


What's the cost of a drive from Broxbourne to Cannock Chase?

The journey, powered by petrol, sets you back £22. In this calculation, we're crunching numbers based on a petrol price of 143 pence per liter and a car's thirst of 37.5 miles per gallon. If you're carpooling with a buddy, that's £11 each (£22 divided by 2). With a trio onboard, it drops to around £7.33 a head (£22 divided by 3), and with a full car of four, it's a mere £5.5 per person (£22 divided by 4).

Let's dig into the math behind it. The fuel expenditure hinges on the distance covered and the car's efficiency. For this particular jaunt, you're looking at guzzling down roughly 15.4 liters of fuel. Crunching the numbers, that's where the £22 total comes from for the trip from Broxbourne to Cannock Chase.
 

Diesel cost from Broxbourne to Cannock Chase.

The trip with diesel fuel costs 13.9 £ (151p/lt, 62.7 mpg).
For 2 passengers: 6.95 £ (13.9/2) /p.
For 3 passengers: 4.63 £ (13.9/3) /p.
For 4 passengers: 3.48 £ (13.9/4) /p.

The main reasons diesel cars use less fuel than petrol cars are:

Diesel engines have higher compression ratios than petrol engines, improving thermal efficiency. Diesel engines extract more energy from each fuel unit due to this increased compression ratio, improving thermal efficiency. Diesel automobiles have superior fuel economy than petrol ones.

Diesel engines create more torque at lower RPM than petrol engines. Diesel vehicles perform better in steady-state driving, requiring less throttle input to maintain speed. Thus, diesel cars have reduced fuel consumption, especially on highways.

Alternative routes from Broxbourne to Cannock Chase

An alternative route from Broxbourne to the Cannock Chase is 121.08 miles and takes 2 hours and 37 minutes.

Which is the cheapest route from Broxbourne to Cannock Chase by car?

The cheapest route from Broxbourne to Cannock Chase is the second suggested route (121mi, 2h 37min) and costs 21 £ (petrol fuel cost, 143p/lt, 37.5mpg).

The most expensive route from Broxbourne to Cannock Chase is the first suggested route (127mi, 2h 14min) and costs 22 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Broxbourne to Cannock Chase?

There are two suggested routes. The fastest route is 127mi (distance from Broxbourne to Cannock Chase) and its duration is 2h 14min. The slowest route is 121mi, and its duration is 2h 37min.

RouteCalculator provides you with the information to prepare your trip from Broxbourne to Cannock Chase by car or motorbike. It offers you alternative road routes that you can follow to go from Broxbourne to Cannock Chase. It provides driving directions from Broxbourne to Cannock Chase, i.e. where to turn and when, distance of the Broxbourne - Cannock Chase route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Broxbourne to Cannock Chase with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Broxbourne located?

Broxbourne is located in Hertfordshire county and in England. It is situated at an altitude of 38 meters above sea level. Broxbourne has coordinates 51.7434730o,-0.0211510o. RouteCalculator provides a map of Broxbourne from which you can plan your trips to other UK cities.

What is the location of Cannock Chase?

Cannock Chase is located in Staffordshire county and in England. It is situated at an altitude of 175 meters above sea level. Cannock Chase has coordinates 52.7183027o,-1.9858812o. RouteCalculator provides a map of Cannock Chase from which you can plan your trips to other UK cities.