Chelmsford Maldon by car, distance and driving time

The distance between Chelmsford and Maldon by car is 10 miles. The driving time is 15 minutes.

How far is Maldon from Chelmsford? The driving distance is 10 miles, depending on the selected route and traffic conditions.

From: Chelmsford, County: Essex, England
To: Maldon, County: Essex, England
10 mi , 15 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Chelmsford to Maldon on map



Driving directions from Chelmsford to Maldon

10 mi 15 min
1.
Head northeast
218 ft
2.
Turn right onto Duke Street (A1099)
116 ft
3.
Turn right onto Victoria Road South (A1099)
962 ft
4.
Enter Market Roundabout and take the 1st exit onto Parkway (A1060)
25 ft
5.
Exit the roundabout onto Parkway (A1060)
0.4 mi
6.
Enter Odeon Roundabout and take the 2nd exit onto Parkway (A1060)
194 ft
7.
Exit the roundabout onto Parkway (A1060)
0.3 mi
8.
Enter Army & Navy Roundabout and take the 2nd exit onto Essex Yeomanry Way (A1114)
213 ft
9.
Exit the roundabout onto Essex Yeomanry Way (A1114)
1.1 mi
10.
Make a slight left onto A1060
1113 ft
11.
Enter the roundabout and take the 1st exit onto Maldon Road (A1060)
15 ft
12.
Exit the roundabout onto Maldon Road (A1060)
0.9 mi
13.
Enter the roundabout and take the 2nd exit onto Sandon Interchange (A414)
109 ft
14.
Exit the roundabout onto Sandon Interchange (A414)
419 ft
15.
Enter the roundabout and take the 2nd exit onto Maldon Road (A414)
177 ft
16.
Exit the roundabout onto Maldon Road (A414)
0.4 mi
17.
Continue onto Main Road (A414)
1 mi
18.
Continue onto Bell Hill (A414)
0.3 mi
19.
Continue onto Main Road (A414)
0.5 mi
20.
Continue slightly left onto Maldon Road (A414)
0.7 mi
21.
Turn left onto Runsell Green
0.4 mi
22.
Continue onto London Road
0.3 mi
23.
Turn right onto Old London Road
2.4 mi
24.
Continue onto London Road
0.5 mi
25.
Turn right
139 ft
26.
You have arrived at your destination, on the left
0 ft


How much does it cost to drive from Chelmsford to Maldon with petrol?

Let's delve into the expenses of a road trip from Chelmsford to Maldon. The journey using petrol will set you back 1.7 pounds. Now, let's walk through how we arrived at this figure.

Firstly, we consider the price of petrol, which is 144 pence per liter. Next, we take into account the car's fuel consumption rate, which stands at 37.5 miles per gallon.

Now, suppose you're carpooling. If there are two passengers sharing the ride, each person will contribute 0.85 pounds (£1.7 divided by 2). With three passengers, the cost per person drops to around 0.57 pounds (£1.7 divided by 3). And if there are four passengers onboard, each person chips in 0.43 pounds (£1.7 divided by 4).

Let's delve deeper into the calculations. To determine how much fuel is needed for the trip, we rely on the distance and the car's fuel efficiency. The distance between Chelmsford and Maldon is approximately 10.02 miles. So, to cover this distance, the car will require roughly 1.2 liters of petrol. We obtained this value by dividing the distance by the car's fuel consumption rate of 37.5 miles per gallon and then converting it to liters.

Once we have the amount of fuel needed, we calculate the total cost. Multiplying the fuel quantity (1.2 liters) by the price per liter (144 pence) yields 1.7 pounds. Therefore, the fuel cost for the journey from Chelmsford to Maldon is 1.7 pounds.
 

Diesel cost from Chelmsford to Maldon.

The trip with diesel fuel costs 1.2 £ (167p/lt, 62.7 mpg).
For 2 passengers: 0.6 £ (1.2/2) /p.
For 3 passengers: 0.4 £ (1.2/3) /p.
For 4 passengers: 0.3 £ (1.2/4) /p.

Alternative routes from Chelmsford to Maldon

The second route from Chelmsford to the Maldon is 12.29 miles and takes 17 minutes.

Which is the cheapest route from Chelmsford to Maldon by car?

The cheapest route from Chelmsford to Maldon is the first suggested route (10mi, 15min) and costs 1.7 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The most expensive route from Chelmsford to Maldon is the second suggested route (12.3mi, 17min) and costs 2.1 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Chelmsford to Maldon?

There are two suggested routes. The fastest route is 10mi (distance from Chelmsford to Maldon) and its duration is 15min. The slowest route is 12.3mi, and its duration is 17min.

RouteCalculator provides you with the information to prepare your trip from Chelmsford to Maldon by car or motorbike. It offers you alternative road routes that you can follow to go from Chelmsford to Maldon. It provides driving directions from Chelmsford to Maldon, i.e. where to turn and when, distance of the Chelmsford - Maldon route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Chelmsford to Maldon with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Chelmsford located?

Chelmsford is located in Essex county and in England. It is situated at an altitude of 33 meters above sea level. Chelmsford has coordinates 51.7355868o,0.4685497o. RouteCalculator provides a map of Chelmsford from which you can plan your trips to other UK cities.

What is the location of Maldon?

Maldon is located in Essex county and in England. It is situated at an altitude of 38 meters above sea level. Maldon has coordinates 51.7318050o,0.6714480o. RouteCalculator provides a map of Maldon from which you can plan your trips to other UK cities.