Chelmsford Tameside by car, distance and driving time
The distance between Chelmsford and Tameside by car is 202 miles. The driving time is 3 hours and 44 minutes.
How far is Tameside from Chelmsford? The driving distance is 202 miles, depending on the selected route and traffic conditions.
To: Tameside, County: Greater Manchester, EnglandDriving directions from Chelmsford to Tameside
What's the cost of a drive from Chelmsford to Tameside?
The journey, powered by petrol, sets you back £35.2. In this calculation, we're crunching numbers based on a petrol price of 144 pence per liter and a car's thirst of 37.5 miles per gallon. If you're carpooling with a buddy, that's £17.6 each (£35.2 divided by 2). With a trio onboard, it drops to around £11.73 a head (£35.2 divided by 3), and with a full car of four, it's a mere £8.8 per person (£35.2 divided by 4).
Let's dig into the math behind it. The fuel expenditure hinges on the distance covered and the car's efficiency. For this particular jaunt, you're looking at guzzling down roughly 24.5 liters of fuel. Crunching the numbers, that's where the £35.2 total comes from for the trip from Chelmsford to Tameside.
Diesel cost from Chelmsford to Tameside.
The trip with diesel fuel costs 24.4 £ (167p/lt, 62.7 mpg).
For 2 passengers: 12.2 £ (24.4/2) /p.
For 3 passengers: 8.13 £ (24.4/3) /p.
For 4 passengers: 6.1 £ (24.4/4) /p.
Diesel fuel and petrol fuel in terms of greater torque at lower RPM:
-
Diesel Fuel: Diesel engines typically produce more torque at lower engine speeds (RPM) compared to petrol engines. This characteristic is due to the inherent design differences between diesel and petrol engines, particularly in their combustion processes and fuel properties. Diesel engines operate on compression ignition, where the air-fuel mixture ignites spontaneously under high pressure and temperature, allowing them to generate high torque even at low RPMs. This characteristic makes diesel vehicles well-suited for tasks requiring high pulling power, such as towing or hauling heavy loads, as they can deliver ample torque at low engine speeds.
-
Petrol (Gasoline): Petrol engines generally produce less torque at lower RPMs compared to diesel engines. While petrol engines can also deliver torque, they often require higher engine speeds to reach their maximum torque output. Petrol engines rely on spark ignition, where the air-fuel mixture is ignited by a spark plug, and this combustion process may not generate as much torque at lower engine speeds as compression ignition in diesel engines. However, advancements in petrol engine technology, such as turbocharging and variable valve timing, have improved torque delivery across a broader RPM range in modern petrol vehicles.
Alternative routes from Chelmsford to Tameside
The second route from Chelmsford to the Tameside is 229.22 miles and takes 3 hours and 51 minutes.
The third route from Chelmsford to the Tameside is 211.94 miles and takes 4 hours and 16 minutes.
Which is the cheapest route from Chelmsford to Tameside by car?
The cheapest route from Chelmsford to Tameside is the first suggested route (202mi, 3h 44min) and costs 35.2 £ (petrol fuel cost, 144p/lt, 37.5mpg).
The second cheapest route from Chelmsford to Tameside is the third suggested route (212mi, 4h 16min) and costs 37 £.
The most expensive route from Chelmsford to Tameside is the second suggested route (229mi, 3h 51min) and costs 40 £.
For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).
How to get from Chelmsford to Tameside?
There are three suggested routes. The fastest route is 202mi (distance from Chelmsford to Tameside) and its duration is 3h 44min. The other route is 229mi, and its duration is 3h 51min. The slowest route is 212mi, and its duration is 4h 16min.
RouteCalculator provides you with the information to prepare your trip from Chelmsford to Tameside by car or motorbike. It offers you alternative road routes that you can follow to go from Chelmsford to Tameside. It provides driving directions from Chelmsford to Tameside, i.e. where to turn and when, distance of the Chelmsford - Tameside route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.
In case you share the journey (carpooling) from Chelmsford to Tameside with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.
Where is Chelmsford located?
Chelmsford is located in Essex county and in England. It is situated at an altitude of 33 meters above sea level. Chelmsford has coordinates 51.7355868o,0.4685497o. RouteCalculator provides a map of Chelmsford from which you can plan your trips to other UK cities.
What is the location of Tameside?
Tameside is located in Greater Manchester county and in England. It is situated at an altitude of 119 meters above sea level. Tameside has coordinates 53.4805828o,-2.0809891o. RouteCalculator provides a map of Tameside from which you can plan your trips to other UK cities.
- Route from Chelmsford to Tamworth
- Distance from Chelmsford to Taunton Deane
- Route from Chelmsford to Teignbridge
- Distance from Chelmsford to Telford and Wrekin
- Miles from Chelmsford to Tendring
- How far is from Chelmsford to Test Valley
- Route from Chelmsford to Tewkesbury
- Distance from Chelmsford to Thanet
- Distance from Chelmsford to Three Rivers
