Clydebank Bearsden by car, distance and driving time

The distance between Clydebank and Bearsden by car is 4.8 miles. The driving time is 9 minutes.

How far is Bearsden from Clydebank? The driving distance is 4.8 miles, depending on the selected route and traffic conditions.

From: Clydebank, County: West Dunbartonshire, Scotland
To: Bearsden, County: East Dunbartonshire, Scotland
4.8 mi , 9 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Clydebank to Bearsden on map



Driving directions from Clydebank to Bearsden

4.8 mi 9 min
1.
Head north on Alexander Street
616 ft
2.
Turn right onto Kilbowie Road (A8014)
1.2 mi
3.
Enter Kilbowie Roundabout and take the 3rd exit towards Hardgate
289 ft
4.
Exit the roundabout towards Hardgate
0.5 mi
5.
Enter Hardgate Roundabout and take the 3rd exit towards Bearsden
308 ft
6.
Exit the roundabout towards Bearsden
0.8 mi
7.
Continue onto Duntocher Road (A810)
0.5 mi
8.
Enter Langfaulds Roundabout and take the 2nd exit towards Bearsden
163 ft
9.
Exit the roundabout towards Bearsden
1.2 mi
10.
Continue onto Drymen Road (A809)
0.5 mi
11.
You have arrived at your destination, on the right
0 ft


How much is the expense of driving from Clydebank to Bearsden?

The expense of driving from Clydebank to Bearsden, using petrol as the fuel source, amounts to £0.8. This calculation derives from considering the petrol price as 144 pence per liter and the car's fuel efficiency at 37.5 miles per gallon. When carpooling with two passengers, the cost of the trip per passenger is halved to £0.4 (£0.8 divided by 2). With three passengers, the expense drops to approximately £0.27 per passenger (£0.8 divided by 3), and with four passengers, it's reduced further to £0.2 per passenger (£0.8 divided by 4).

To delve into the details of the calculations, the fuel cost computation is reliant on the distance traveled and the car's fuel consumption rate. For the journey from Clydebank to Bearsden, approximately 0.6 liters of fuel would be required. This amount is determined by dividing the distance of 4.85 miles by the car's fuel consumption rate of 37.5 miles per gallon, and then converting from gallons to liters using the conversion factor of 4.54609 liters per gallon.

Multiplying the fuel needed by the petrol price per liter results in the total fuel cost of £0.8 for the trip. This breakdown illustrates the impact of various factors, such as fuel price and consumption rate, on the overall cost of the journey, providing insights for individuals planning similar trips and requiring budget estimates.
 

Diesel cost from Clydebank to Bearsden.

The trip with diesel fuel costs 0.6 £ (167p/lt, 62.7 mpg).
For 2 passengers: 0.3 £ (0.6/2) /p.
For 3 passengers: 0.2 £ (0.6/3) /p.
For 4 passengers: 0.15 £ (0.6/4) /p.

One key factor contributing to diesel cars generally having lower fuel consumption than petrol cars is their higher thermal efficiency. Diesel engines typically operate at higher compression ratios than petrol engines, allowing them to extract more energy from each unit of fuel. This increased efficiency means diesel vehicles can travel farther on the same amount of fuel compared to petrol vehicles, resulting in lower fuel consumption overall.

Alternative routes from Clydebank to Bearsden

The most time-consuming route from Clydebank to Bearsden spans a distance of 4.47 miles and requires a travel time of 10 minutes.

Which is the cheapest route from Clydebank to Bearsden by car?

The cheapest route from Clydebank to Bearsden is the suggested route (0ft, ) and costs £ (petrol fuel cost, 144p/lt, 37.5mpg).

The most expensive route from Clydebank to Bearsden is the suggested route (0ft, ) and costs £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Clydebank to Bearsden?

There are two suggested routes. The fastest route is 4.8mi (distance from Clydebank to Bearsden) and its duration is 9min. The slowest route is 4.5mi, and its duration is 10min.

RouteCalculator provides you with the information to prepare your trip from Clydebank to Bearsden by car or motorbike. It offers you alternative road routes that you can follow to go from Clydebank to Bearsden. It provides driving directions from Clydebank to Bearsden, i.e. where to turn and when, distance of the Clydebank - Bearsden route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Clydebank to Bearsden with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Clydebank located?

Clydebank is located in West Dunbartonshire county and in Scotland. It is situated at an altitude of 8 meters above sea level. Clydebank has coordinates 55.9000990o,-4.4047740o. RouteCalculator provides a map of Clydebank from which you can plan your trips to other UK cities.

What is the location of Bearsden?

Bearsden is located in East Dunbartonshire county and in Scotland. It is situated at an altitude of 61 meters above sea level. Bearsden has coordinates 55.9216900o,-4.3355250o. RouteCalculator provides a map of Bearsden from which you can plan your trips to other UK cities.