Colwyn Bay Barking and Dagenham by car, distance and driving time
The distance between Colwyn Bay and Barking and Dagenham by car is 241 miles. The driving time is 4 hours and 20 minutes.
How far is Barking and Dagenham from Colwyn Bay? The driving distance is 241 miles, depending on the selected route and traffic conditions.
To: Barking and Dagenham, County: Greater London, EnglandDriving directions from Colwyn Bay to Barking and Dagenham
If you were to travel from Colwyn Bay to Barking and Dagenham, how much would it charge you?
A trip with petrol gasoline will cost you 42.1 pounds. According to the figure presented above, the price of petrol corresponds to 144 pence per litre, and the amount of petrol that the vehicle consumes is equivalent to 37.5 miles per gallon.
Through carpooling, the cost of this trip is 21.05 pounds for each of the two passengers.
When there are three people in the automobile, the cost of this trip is 14.03 pounds (42.1/3) for each individual passenger.
This trip will cost you 10.53 pounds for each of the four people who are travelling in the automobile.
The cost of fuel is equal to (241.1 miles / 37.5 miles per gallon) multiplied by 144 pence a litre, which is 42.1 pounds.
A more in-depth explanation of the result is as follows:
Fuel usage is miles multiplied by 4.54609 divided by the distance travelled by the vehicle.Consumption is 241.1 miles multiplied by 4.54609 divided by 37.5 miles per gallon, which equals 29.2 litres
It takes 29.2 litres of fuel.
The cost of fuel is equal to the amount of fuel required multiplied by the price per litre, which is 29.2 litres multiplied by 144 pence a litre, which is 42.1 pounds.
The cost of fuel from Colwyn Bay to Barking and Dagenham is 42.1 pounds.
Diesel cost from Colwyn Bay to Barking and Dagenham.
The trip with diesel fuel costs 29.2 £ (167p/lt, 62.7 mpg).
For 2 passengers: 14.6 £ (29.2/2) /p.
For 3 passengers: 9.73 £ (29.2/3) /p.
For 4 passengers: 7.3 £ (29.2/4) /p.
Diesel cars generally have lower fuel consumption compared to petrol cars for the following reasons:
-
Higher Energy Density of Diesel Fuel: Diesel fuel contains more energy per liter compared to petrol. This means that for the same volume of fuel, diesel engines can generate more power and travel a greater distance, resulting in lower fuel consumption.
-
Increased Thermal Efficiency of Diesel Engines: Diesel engines operate at higher compression ratios compared to petrol engines. This higher compression ratio allows diesel engines to extract more energy from each unit of fuel. As a result, diesel engines are typically more thermally efficient, translating into lower fuel consumption.
-
Greater Torque at Lower RPM: Diesel engines tend to produce more torque at lower engine speeds (RPM) compared to petrol engines. This characteristic allows diesel vehicles to maintain better fuel efficiency, particularly during steady-state cruising, as they require less throttle input to maintain speed.
These factors combined contribute to the generally lower fuel consumption observed in diesel cars compared to their petrol counterparts.
Alternative routes from Colwyn Bay to Barking and Dagenham
The second route from Colwyn Bay to the Barking and Dagenham is 262.59 miles and takes 4 hours and 35 minutes.
The third route from Colwyn Bay to the Barking and Dagenham is 235.94 miles and takes 4 hours and 58 minutes.
Which is the cheapest route from Colwyn Bay to Barking and Dagenham by car?
The cheapest route from Colwyn Bay to Barking and Dagenham is the third suggested route (236mi, 4h 58min) and costs 41.2 £ (petrol fuel cost, 144p/lt, 37.5mpg).
The second cheapest route from Colwyn Bay to Barking and Dagenham is the first suggested route (241mi, 4h 20min) and costs 42.1 £.
The most expensive route from Colwyn Bay to Barking and Dagenham is the second suggested route (263mi, 4h 35min) and costs 45.8 £.
For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).
How to get from Colwyn Bay to Barking and Dagenham?
There are three suggested routes. The fastest route is 241mi (distance from Colwyn Bay to Barking and Dagenham) and its duration is 4h 20min. The other route is 263mi, and its duration is 4h 35min. The slowest route is 236mi, and its duration is 4h 58min.
RouteCalculator provides you with the information to prepare your trip from Colwyn Bay to Barking and Dagenham by car or motorbike. It offers you alternative road routes that you can follow to go from Colwyn Bay to Barking and Dagenham. It provides driving directions from Colwyn Bay to Barking and Dagenham, i.e. where to turn and when, distance of the Colwyn Bay - Barking and Dagenham route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.
In case you share the journey (carpooling) from Colwyn Bay to Barking and Dagenham with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.
Where is Colwyn Bay located?
Colwyn Bay is located in Colwyn Bay county and in Wales. It is situated at an altitude of 35 meters above sea level. Colwyn Bay has coordinates 53.2931820o,-3.7276400o. RouteCalculator provides a map of Colwyn Bay from which you can plan your trips to other UK cities.
What is the location of Barking and Dagenham?
Barking and Dagenham is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Barking and Dagenham has coordinates 51.5464828o,0.1293497o. RouteCalculator provides a map of Barking and Dagenham from which you can plan your trips to other UK cities.
- Route from Colwyn Bay to Barnet
- Distance from Colwyn Bay to Barnsley
- Route from Colwyn Bay to Barrow-in-Furness
- Distance from Colwyn Bay to Barry
- Miles from Colwyn Bay to Basildon
- How far is from Colwyn Bay to Basingstoke and Deane
- Route from Colwyn Bay to Bassetlaw
- Distance from Colwyn Bay to Bath and North East Somerset
- Distance from Colwyn Bay to Bathgate
