Route from Gateshead to Corby

The distance between Gateshead and Corby is 198 miles. Travel time is 3 hours and 23 minutes.

From: Gateshead, County: Tyne and Wear, England
To: Corby, County: Northamptonshire, England
198 mi , 3 h 23 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Gateshead to Corby on map



Driving directions from Gateshead to Corby

198 mi 3 h 23 min
1.
Head east on Exeter Street
391 ft
2.
Turn right onto Prince Consort Road
0.3 mi
3.
Turn right onto Durham Road (A167)
2.7 mi
4.
Enter Harlow Green and take the 2nd exit towards A1(M): The SOUTH
356 ft
5.
Exit the roundabout towards A1(M): The SOUTH
84 mi
6.
Keep left onto A1(M)
96 mi
7.
Take the ramp on the left onto A1
918 ft
8.
Turn right onto Stamford Road (A43)
1.8 mi
9.
Continue onto Main Road (A43)
1.8 mi
10.
Enter Duddington Roundabout and take the 2nd exit onto A43
205 ft
11.
Exit the roundabout onto A43
8.2 mi
12.
Enter the roundabout and take the 2nd exit onto Stamford Road (A43)
164 ft
13.
Exit the roundabout onto Stamford Road (A43)
0.3 mi
14.
Enter the roundabout and take the 2nd exit onto Bangrave Road (A43)
172 ft
15.
Exit the roundabout onto Bangrave Road (A43)
0.6 mi
16.
Enter the roundabout and take the 1st exit onto Bangrave Road (A43)
74 ft
17.
Exit the roundabout onto Bangrave Road (A43)
0.3 mi
18.
Enter the roundabout and take the 3rd exit onto Weldon Road (A427)
386 ft
19.
Exit the roundabout onto Weldon Road (A427)
1.1 mi
20.
Enter the roundabout and take the 3rd exit onto Lloyds Road (A6086)
433 ft
21.
Exit the roundabout onto Lloyds Road (A6086)
0.3 mi
22.
Enter the roundabout and take the 1st exit onto Lloyds Road (B6481)
98 ft
23.
Exit the roundabout onto Lloyds Road (B6481)
563 ft
24.
Enter the roundabout and exit onto B6481
505 ft
25.
You have arrived at your destination, on the right
0 ft


How much is the expense of driving from Gateshead to Corby?

The expense of driving from Gateshead to Corby, using petrol as the fuel source, amounts to £34.3. This calculation derives from considering the petrol price as 143 pence per liter and the car's fuel efficiency at 37.5 miles per gallon. When carpooling with two passengers, the cost of the trip per passenger is halved to £17.15 (£34.3 divided by 2). With three passengers, the expense drops to approximately £11.43 per passenger (£34.3 divided by 3), and with four passengers, it's reduced further to £8.58 per passenger (£34.3 divided by 4).

To delve into the details of the calculations, the fuel cost computation is reliant on the distance traveled and the car's fuel consumption rate. For the journey from Gateshead to Corby, approximately 24 liters of fuel would be required. This amount is determined by dividing the distance of 198.1 miles by the car's fuel consumption rate of 37.5 miles per gallon, and then converting from gallons to liters using the conversion factor of 4.54609 liters per gallon.

Multiplying the fuel needed by the petrol price per liter results in the total fuel cost of £34.3 for the trip. This breakdown illustrates the impact of various factors, such as fuel price and consumption rate, on the overall cost of the journey, providing insights for individuals planning similar trips and requiring budget estimates.
 

Diesel cost from Gateshead to Corby.

The trip with diesel fuel costs 21.7 £ (151p/lt, 62.7 mpg).
For 2 passengers: 10.85 £ (21.7/2) /p.
For 3 passengers: 7.23 £ (21.7/3) /p.
For 4 passengers: 5.43 £ (21.7/4) /p.

Alternative routes from Gateshead to Corby

The second route from Gateshead to the Corby is 208.2 miles and takes 3 hours and 52 minutes.

Which is the cheapest route from Gateshead to Corby by car?

The cheapest route from Gateshead to Corby is the first suggested route (198mi, 3h 23min) and costs 34.3 £ (petrol fuel cost, 143p/lt, 37.5mpg).

The most expensive route from Gateshead to Corby is the second suggested route (208mi, 3h 52min) and costs 36.1 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Gateshead to Corby?

There are two suggested routes. The fastest route is 198mi (distance from Gateshead to Corby) and its duration is 3h 23min. The slowest route is 208mi, and its duration is 3h 52min.

RouteCalculator provides you with the information to prepare your trip from Gateshead to Corby by car or motorbike. It offers you alternative road routes that you can follow to go from Gateshead to Corby. It provides driving directions from Gateshead to Corby, i.e. where to turn and when, distance of the Gateshead - Corby route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Gateshead to Corby with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Gateshead located?

Gateshead is located in Tyne and Wear county and in England. It is situated at an altitude of 81 meters above sea level. Gateshead has coordinates 54.9526800o,-1.6034110o. RouteCalculator provides a map of Gateshead from which you can plan your trips to other UK cities.

What is the location of Corby?

Corby is located in Northamptonshire county and in England. It is situated at an altitude of 105 meters above sea level. Corby has coordinates 52.4922983o,-0.6842333o. RouteCalculator provides a map of Corby from which you can plan your trips to other UK cities.