Route from Gateshead to Harborough

The distance between Gateshead and Harborough is 191 miles. Travel time is 3 hours and 23 minutes.

From: Gateshead, County: Tyne and Wear, England
To: Harborough, County: Leicestershire, England
191 mi , 3 h 23 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Gateshead to Harborough on map



Driving directions from Gateshead to Harborough

191 mi 3 h 23 min
1.
Head east on Exeter Street
391 ft
2.
Turn right onto Prince Consort Road
0.3 mi
3.
Turn right onto Durham Road (A167)
2.7 mi
4.
Enter Harlow Green and take the 2nd exit towards A1(M): The SOUTH
356 ft
5.
Exit the roundabout towards A1(M): The SOUTH
84 mi
6.
Keep left onto A1(M)
56.9 mi
7.
Take the ramp on the left onto A1
0.3 mi
8.
Enter the roundabout and take the 3rd exit onto B6325
670 ft
9.
Exit the roundabout onto B6325
265 ft
10.
Turn left onto B6325
1.1 mi
11.
Make a slight left to stay on Great North Road (A616)
1.5 mi
12.
Enter the roundabout and take the 3rd exit onto Newark Bypass (A46)
338 ft
13.
Exit the roundabout onto Newark Bypass (A46)
1.6 mi
14.
Enter the roundabout and take the 2nd exit onto A46
428 ft
15.
Exit the roundabout onto A46
26.9 mi
16.
Take the ramp on the left towards Melton
0.4 mi
17.
Enter Cossington Interchange and take the 1st exit onto Syston Northern Bypass (A607)
21 ft
18.
Exit the roundabout onto Syston Northern Bypass (A607)
1.2 mi
19.
Enter the roundabout and take the 3rd exit onto Rearsby Road
319 ft
20.
Exit the roundabout onto Rearsby Road
1303 ft
21.
Turn left onto Queniborough Road
0.3 mi
22.
Continue onto Main Street
0.3 mi
23.
Continue onto Croxton Road
2.9 mi
24.
Continue onto Twyford Road
0.9 mi
25.
Continue onto South Croxton Road
0.3 mi
26.
Continue onto Leicester Road
0.6 mi
27.
Turn right to stay on Leicester Road
518 ft
28.
Turn right onto Melton Road (B6047)
2.8 mi
29.
Continue onto Leicester Road (B6047)
0.5 mi
30.
Continue onto Melton Road (B6047)
1.5 mi
31.
Turn right onto Harborough Road (B6047)
2.1 mi
32.
Go straight onto New Inn Lane (B6047)
1 mi
33.
Continue onto Melton Road (B6047)
0.5 mi
34.
You have arrived at your destination
0 ft


How much does it cost to drive from Gateshead to Harborough with petrol?

Driving from Gateshead to Harborough costs £33.2 with petrol. The calculation assumes a petrol price of 143 pence per liter and a car's petrol consumption of 37.5 miles per gallon. Carpooling with two passengers brings the cost down to £16.6 per person. With three passengers, it's £11.07 per person, and with four passengers, it's £8.3 per person. The fuel cost for the trip is derived from the distance and car fuel consumption, totaling 23.2 liters of fuel. This results in a £33.2 fuel cost for the journey.
 

Diesel cost from Gateshead to Harborough.

The trip with diesel fuel costs 20.9 £ (151p/lt, 62.7 mpg).
For 2 passengers: 10.45 £ (20.9/2) /p.
For 3 passengers: 6.97 £ (20.9/3) /p.
For 4 passengers: 5.23 £ (20.9/4) /p.

The main reasons diesel cars use less fuel than petrol cars are:

Diesel engines have higher compression ratios than petrol engines, improving thermal efficiency. Diesel engines extract more energy from each fuel unit due to this increased compression ratio, improving thermal efficiency. Diesel automobiles have superior fuel economy than petrol ones.

Diesel engines create more torque at lower RPM than petrol engines. Diesel vehicles perform better in steady-state driving, requiring less throttle input to maintain speed. Thus, diesel cars have reduced fuel consumption, especially on highways.

Alternative routes from Gateshead to Harborough

The second route from Gateshead to the Harborough is 197.16 miles and takes 3 hours and 27 minutes.

The third route from Gateshead to the Harborough is 201.4 miles and takes 3 hours and 52 minutes.

Which is the cheapest route from Gateshead to Harborough by car?

The cheapest route from Gateshead to Harborough is the first suggested route (191mi, 3h 23min) and costs 33.2 £ (petrol fuel cost, 143p/lt, 37.5mpg).

The second cheapest route from Gateshead to Harborough is the second suggested route (197mi, 3h 27min) and costs 34.2 £.

The most expensive route from Gateshead to Harborough is the third suggested route (201mi, 3h 52min) and costs 34.9 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Gateshead to Harborough?

There are three suggested routes. The fastest route is 191mi (distance from Gateshead to Harborough) and its duration is 3h 23min. The other route is 197mi, and its duration is 3h 27min. The slowest route is 201mi, and its duration is 3h 52min.

RouteCalculator provides you with the information to prepare your trip from Gateshead to Harborough by car or motorbike. It offers you alternative road routes that you can follow to go from Gateshead to Harborough. It provides driving directions from Gateshead to Harborough, i.e. where to turn and when, distance of the Gateshead - Harborough route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Gateshead to Harborough with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Gateshead located?

Gateshead is located in Tyne and Wear county and in England. It is situated at an altitude of 81 meters above sea level. Gateshead has coordinates 54.9526800o,-1.6034110o. RouteCalculator provides a map of Gateshead from which you can plan your trips to other UK cities.

What is the location of Harborough?

Harborough is located in Leicestershire county and in England. It is situated at an altitude of 131 meters above sea level. Harborough has coordinates 52.5708762o,-0.9346458o. RouteCalculator provides a map of Harborough from which you can plan your trips to other UK cities.