Gateshead Richmondshire by car, distance and driving time

The distance between Gateshead and Richmondshire by car is 58.3 miles. The driving time is 1 hour and 12 minutes.

How far is Richmondshire from Gateshead? The driving distance is 58.3 miles, depending on the selected route and traffic conditions.

From: Gateshead, County: Tyne and Wear, England
To: Richmondshire, County: North Yorkshire, England
58.3 mi , 1 h 12 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Gateshead to Richmondshire on map



Driving directions from Gateshead to Richmondshire

58.3 mi 1 h 12 min
1.
Head east on Exeter Street
391 ft
2.
Turn right onto Prince Consort Road
0.3 mi
3.
Turn right onto Durham Road (A167)
2.7 mi
4.
Enter Harlow Green and take the 2nd exit towards A1(M): The SOUTH
356 ft
5.
Exit the roundabout towards A1(M): The SOUTH
35.9 mi
6.
Take the ramp on the left towards A6055: Richmond
0.3 mi
7.
Enter Scotch Corner and take the 3rd exit towards Richmond
755 ft
8.
Exit the roundabout towards Richmond
0.4 mi
9.
Enter the roundabout and take the 2nd exit towards A6108: Richmond
339 ft
10.
Exit the roundabout towards A6108: Richmond
1.4 mi
11.
Continue onto Richmond Road (A6108)
2.1 mi
12.
Enter the roundabout and take the 1st exit onto A6108
46 ft
13.
Exit the roundabout onto A6108
0.4 mi
14.
Enter the roundabout and take the 2nd exit onto Queens Road
41 ft
15.
Exit the roundabout onto Queens Road
333 ft
16.
Enter the roundabout and take the 2nd exit onto Victoria Road (A6108)
97 ft
17.
Exit the roundabout onto Victoria Road (A6108)
377 ft
18.
Turn left onto Rosemary Lane
433 ft
19.
Turn left onto Bargate
570 ft
20.
Continue onto Bridge Street
1114 ft
21.
Continue onto Slee Gill
844 ft
22.
Keep right at the fork
7.6 mi
23.
Continue straight
492 ft
24.
Continue onto Scarth Nick
1.9 mi
25.
Continue onto Sissy Bank
1.1 mi
26.
Make a slight left
0.9 mi
27.
Continue straight
1.8 mi
28.
Turn right
321 ft
29.
Turn right
0.3 mi
30.
You have arrived at your destination
0 ft


How much does it cost to drive from Gateshead to Richmondshire?

The trip with petrol fuel costs 10.2 £. In the above calculation, the petrol price is considered to be 144 pence per liter and the petrol consumption of the car is 37.5 miles per gallon.
For 2 passengers in carpooling, the cost of this trip is 5.1 £ (10.2/2) per passenger.
For 3 passengers in the car, the cost of this trip is 3.4 £ (10.2/3) per passenger.
For 4 passengers in the car, the cost of this trip are 2.55 £ (10.2/4) per passenger.


Fuel cost = (58.29 mi / 37.5 mpg) x 144 pence per liter = 10.2 £

In more detail, the result is obtained:

Fuel needed = Distance / Car fuel consumption = miles * 4.54609 / carConsumtion = 58.29 mi * 4.54609 / 37.5 mpg = 7.1 liters

Fuel needed = 7.1 lt

Fuel cost = Fuel needed x Price per liter = 7.1 liters x 144 pence per liter = 10.2 £

Fuel cost from Gateshead to Richmondshire = 10.2 £

Diesel cost from Gateshead to Richmondshire.

The trip with diesel fuel costs 7.1 £ (167p/lt, 62.7 mpg).
For 2 passengers: 3.55 £ (7.1/2) /p.
For 3 passengers: 2.37 £ (7.1/3) /p.
For 4 passengers: 1.78 £ (7.1/4) /p.

Diesel fuel vs petrol fuel in terms of energy density:

  • Diesel Fuel: Diesel fuel is known for its higher energy density compared to petrol. This means that diesel contains more energy per volume than petrol. As a result, diesel engines can achieve better fuel efficiency and typically provide greater mileage per gallon or liter of fuel compared to petrol engines.

  • Petrol (Gasoline): Petrol has a lower energy density compared to diesel fuel. This means that petrol contains less energy per volume than diesel. While petrol engines are still efficient, they tend to have slightly lower fuel efficiency and may offer shorter driving ranges compared to diesel engines due to this difference in energy density.

Alternative routes from Gateshead to Richmondshire

An alternative route from Gateshead to the Richmondshire is 61.11 miles and takes 1 hour and 26 minutes.

Which is the cheapest route from Gateshead to Richmondshire by car?

The cheapest route from Gateshead to Richmondshire is the first suggested route (58.3mi, 1h 12min) and costs 10.2 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The most expensive route from Gateshead to Richmondshire is the second suggested route (61.1mi, 1h 26min) and costs 10.7 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Gateshead to Richmondshire?

There are two suggested routes. The fastest route is 58.3mi (distance from Gateshead to Richmondshire) and its duration is 1h 12min. The slowest route is 61.1mi, and its duration is 1h 26min.

RouteCalculator provides you with the information to prepare your trip from Gateshead to Richmondshire by car or motorbike. It offers you alternative road routes that you can follow to go from Gateshead to Richmondshire. It provides driving directions from Gateshead to Richmondshire, i.e. where to turn and when, distance of the Gateshead - Richmondshire route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Gateshead to Richmondshire with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Gateshead located?

Gateshead is located in Tyne and Wear county and in England. It is situated at an altitude of 81 meters above sea level. Gateshead has coordinates 54.9526800o,-1.6034110o. RouteCalculator provides a map of Gateshead from which you can plan your trips to other UK cities.

What is the location of Richmondshire?

Richmondshire is located in North Yorkshire county and in England. It is situated at an altitude of 405 meters above sea level. Richmondshire has coordinates 54.3299809o,-2.0118584o. RouteCalculator provides a map of Richmondshire from which you can plan your trips to other UK cities.