Route from Hammersmith and Fulham to Reigate and Banstead

The distance between Hammersmith and Fulham and Reigate and Banstead is 18.5 miles. Travel time is 42 minutes.

From: Hammersmith and Fulham, County: Greater London, England
To: Reigate and Banstead, County: Surrey, England
18.5 mi , 42 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Hammersmith and Fulham to Reigate and Banstead on map



Driving directions from Hammersmith and Fulham to Reigate and Banstead

18.5 mi 42 min
1.
Head east on Coulter Road
71 ft
2.
Turn right onto Agate Road
698 ft
3.
Turn right onto Adie Road
46 ft
4.
Turn left onto Overstone Road
1003 ft
5.
Continue slightly left onto Beadon Road (A315)
850 ft
6.
Turn slight left onto Hammersmith Broadway (A315)
333 ft
7.
Keep right onto A315
894 ft
8.
Turn left onto Fulham Palace Road (A219)
1.5 mi
9.
Turn right onto Fulham High Street (A219)
949 ft
10.
Continue onto Putney Bridge Approach (A219)
0.3 mi
11.
Keep left onto Putney High Street (A219)
0.4 mi
12.
Continue onto Putney Hill (A219)
0.6 mi
13.
Continue onto Tibbet's Ride (A219)
0.3 mi
14.
Enter Tibbet's Corner and take the 3rd exit onto A3
605 ft
15.
Exit the roundabout onto A3
897 ft
16.
Merge right onto Kingston Road (A3)
0.8 mi
17.
Continue onto Roehampton Vale (A3)
0.6 mi
18.
Continue onto Kingston Vale (A3)
522 ft
19.
Continue onto Robin Hood Way (A3)
1.5 mi
20.
Continue onto Beverley Way (A3)
1.3 mi
21.
Continue onto Malden Way (A3)
0.3 mi
22.
Take the ramp on the left towards A2043: Worcester Park
1178 ft
23.
Enter Malden Junction and take the 1st exit onto Malden Road (A2043)
34 ft
24.
Exit the roundabout onto Malden Road (A2043)
0.9 mi
25.
Continue onto Central Road (A2043)
0.8 mi
26.
Continue onto Cheam Common Road (A2043)
0.4 mi
27.
Continue onto Malden Road (A2043)
0.8 mi
28.
Turn left onto Lumley Road
1034 ft
29.
Turn right onto St Dunstan's Hill (A217)
1.7 mi
30.
Enter Banstead Downs and take the 2nd exit onto Brighton Road (A217)
102 ft
31.
Exit the roundabout onto Brighton Road (A217)
3 mi
32.
Keep left onto Brighton Road (A217)
120 ft
33.
Make a slight left onto Waterhouse Lane
1 mi
34.
Turn right onto Sandy Lane
0.7 mi
35.
You have arrived at your destination, on the left
0 ft


How much does it cost to drive from Hammersmith and Fulham to Reigate and Banstead with petrol?

Let's delve into the expenses of a road trip from Hammersmith and Fulham to Reigate and Banstead. The journey using petrol will set you back 3.2 pounds. Now, let's walk through how we arrived at this figure.

Firstly, we consider the price of petrol, which is 144 pence per liter. Next, we take into account the car's fuel consumption rate, which stands at 37.5 miles per gallon.

Now, suppose you're carpooling. If there are two passengers sharing the ride, each person will contribute 1.6 pounds (£3.2 divided by 2). With three passengers, the cost per person drops to around 1.07 pounds (£3.2 divided by 3). And if there are four passengers onboard, each person chips in 0.8 pounds (£3.2 divided by 4).

Let's delve deeper into the calculations. To determine how much fuel is needed for the trip, we rely on the distance and the car's fuel efficiency. The distance between Hammersmith and Fulham and Reigate and Banstead is approximately 18.48 miles. So, to cover this distance, the car will require roughly 2.2 liters of petrol. We obtained this value by dividing the distance by the car's fuel consumption rate of 37.5 miles per gallon and then converting it to liters.

Once we have the amount of fuel needed, we calculate the total cost. Multiplying the fuel quantity (2.2 liters) by the price per liter (144 pence) yields 3.2 pounds. Therefore, the fuel cost for the journey from Hammersmith and Fulham to Reigate and Banstead is 3.2 pounds.
 

 

Yes, fuel quality affects car fuel usage. The primary reasons:

Engine cleanliness and efficiency may be maintained using high-quality petrololine and the right additives and detergents. Clean engines burn fuel more effectively, improving mileage and fuel economy.

Performance: Impurities or uneven blends in low-quality fuels can cause incomplete combustion or engine banging. Engine efficiency and fuel consumption may suffer.

Engine deposits: Low-quality fuels can deposit on fuel injectors, intake valves, and combustion chambers. Deposits can hinder fuel delivery and combustion, reducing efficiency and increasing consumption.

Carbon monoxide and hydrocarbon emissions may increase with low-quality fuels. Inefficient combustion from low-quality petrololine can increase emissions and engine performance and fuel consumption.

Continued use of low-quality fuel can damage engines and reduce fuel efficiency. Engine deposits can slow engine performance, increasing fuel consumption and repair costs.

Overall, utilizing high-quality fuel that matches manufacturer specifications can improve engine performance, emissions, and fuel consumption.

Diesel cost from Hammersmith and Fulham to Reigate and Banstead.

The trip with diesel fuel costs 2.2 £ (167p/lt, 62.7 mpg).
For 2 passengers: 1.1 £ (2.2/2) /p.
For 3 passengers: 0.73 £ (2.2/3) /p.
For 4 passengers: 0.55 £ (2.2/4) /p.

Where is Hammersmith and Fulham located?

Hammersmith and Fulham is located in Greater London county and in England. It is situated at an altitude of 6 meters above sea level. Hammersmith and Fulham has coordinates 51.4990170o,-0.2291497o. RouteCalculator provides a map of Hammersmith and Fulham from which you can plan your trips to other UK cities.

What is the location of Reigate and Banstead?

Reigate and Banstead is located in Surrey county and in England. It is situated at an altitude of 171 meters above sea level. Reigate and Banstead has coordinates 51.2839423o,-0.2098622o. RouteCalculator provides a map of Reigate and Banstead from which you can plan your trips to other UK cities.