Hillingdon Cannock Chase by car, distance and driving time

The distance between Hillingdon and Cannock Chase by car is 125 miles. The driving time is 2 hours and 10 minutes.

How far is Cannock Chase from Hillingdon? The driving distance is 125 miles, depending on the selected route and traffic conditions.

From: Hillingdon, County: Greater London, England
To: Cannock Chase, County: Staffordshire, England
125 mi , 2 h 10 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Hillingdon to Cannock Chase on map



Driving directions from Hillingdon to Cannock Chase

125 mi 2 h 10 min
1.
Head north on The Dingle
262 ft
2.
Turn left onto The Larches
323 ft
3.
Turn right onto Brampton Road
1042 ft
4.
Turn left onto Clifton Gardens
331 ft
5.
Turn right
424 ft
6.
Turn right onto Long Lane (A437)
0.9 mi
7.
Turn left onto A437
517 ft
8.
Enter the roundabout and take the 1st exit
48 ft
9.
Exit the roundabout
0.5 mi
10.
Merge right onto Western Avenue (A40)
1.1 mi
11.
Continue towards M40: Birmingham
30 mi
12.
Keep right onto M40
56.8 mi
13.
Take exit 3A on the left towards M42 North: Birmingham (E
15.2 mi
14.
Keep right onto M6 Toll
13.9 mi
15.
Take the ramp on the left
0.9 mi
16.
Enter the roundabout and take the 2nd exit onto Burntwood Way (A5195)
253 ft
17.
Exit the roundabout onto Burntwood Way (A5195)
1 mi
18.
Enter the roundabout and take the 1st exit onto A5190
97 ft
19.
Exit the roundabout onto A5190
0.7 mi
20.
Enter the roundabout and take the 3rd exit onto Cannock Road
254 ft
21.
Exit the roundabout onto Cannock Road
448 ft
22.
Enter the roundabout and take the 1st exit onto Stables Way
24 ft
23.
Exit the roundabout onto Stables Way
0.5 mi
24.
Enter the roundabout and take the 1st exit
89 ft
25.
Exit the roundabout
0.5 mi
26.
Continue onto Sevens Road
0.6 mi
27.
Continue onto Cannock Wood Road
0.5 mi
28.
Turn left onto Littleworth Road
0.3 mi
29.
Turn right onto Rawnsley Road
0.9 mi
30.
Turn right
234 ft
31.
You have arrived at your destination, straight ahead
0 ft


How much does it cost to drive from Hillingdon to Cannock Chase with petrol?

Let's delve into the expenses of a road trip from Hillingdon to Cannock Chase. The journey using petrol will set you back 21.8 pounds. Now, let's walk through how we arrived at this figure.

Firstly, we consider the price of petrol, which is 144 pence per liter. Next, we take into account the car's fuel consumption rate, which stands at 37.5 miles per gallon.

Now, suppose you're carpooling. If there are two passengers sharing the ride, each person will contribute 10.9 pounds (£21.8 divided by 2). With three passengers, the cost per person drops to around 7.27 pounds (£21.8 divided by 3). And if there are four passengers onboard, each person chips in 5.45 pounds (£21.8 divided by 4).

Let's delve deeper into the calculations. To determine how much fuel is needed for the trip, we rely on the distance and the car's fuel efficiency. The distance between Hillingdon and Cannock Chase is approximately 125.15 miles. So, to cover this distance, the car will require roughly 15.2 liters of petrol. We obtained this value by dividing the distance by the car's fuel consumption rate of 37.5 miles per gallon and then converting it to liters.

Once we have the amount of fuel needed, we calculate the total cost. Multiplying the fuel quantity (15.2 liters) by the price per liter (144 pence) yields 21.8 pounds. Therefore, the fuel cost for the journey from Hillingdon to Cannock Chase is 21.8 pounds.
 

Diesel cost from Hillingdon to Cannock Chase.

The trip with diesel fuel costs 15.1 £ (167p/lt, 62.7 mpg).
For 2 passengers: 7.55 £ (15.1/2) /p.
For 3 passengers: 5.03 £ (15.1/3) /p.
For 4 passengers: 3.78 £ (15.1/4) /p.

Diesel fuel and gasoline (gasoline) fuel in terms of how well they use fuel: 

Diesel Fuel: In general, diesel engines use less gas than petrol engines. This is mostly because diesel fuel has a higher energy density and diesel engines are better at using heat. Compared to gasoline, diesel fuel has more energy per litre or gallon. This means that diesel engines can get more energy from each unit of fuel. Diesel engines also have higher compression ratios, which makes them even more thermally efficient. Because of this, diesel cars usually get better gas mileage and can go farther on a gallon or litre of gas than gasoline cars of the same size and speed. 
Petrol (petrol): Diesel engines use less fuel than petrol engines in general. Even though gas is still a good fuel for internal combustion engines, diesel fuel usually has a higher energy density. This suggests that gas engines might need more fuel to work as well as diesel engines. The difference between petrol and diesel cars has become smaller, though, thanks to improvements in petrol engine technology like turbocharging and direct injection. 
Overall, both diesel and gasoline engines can be used to get good gas mileage, but diesel engines tend to be better because they store energy more efficiently and cool down faster. But how people drive, how the car is built, and other things can also affect how much fuel a diesel or gas car uses.
 

Alternative routes from Hillingdon to Cannock Chase

The second route from Hillingdon to the Cannock Chase is 128.96 miles and takes 2 hours and 14 minutes.

The third route from Hillingdon to the Cannock Chase is 120.18 miles and takes 2 hours and 39 minutes.

Which is the cheapest route from Hillingdon to Cannock Chase by car?

The cheapest route from Hillingdon to Cannock Chase is the third suggested route (120mi, 2h 39min) and costs 21 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The second cheapest route from Hillingdon to Cannock Chase is the first suggested route (125mi, 2h 10min) and costs 21.8 £.

The most expensive route from Hillingdon to Cannock Chase is the second suggested route (129mi, 2h 14min) and costs 22.5 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Hillingdon to Cannock Chase?

There are three suggested routes. The fastest route is 125mi (distance from Hillingdon to Cannock Chase) and its duration is 2h 10min. The other route is 129mi, and its duration is 2h 14min. The slowest route is 120mi, and its duration is 2h 39min.

RouteCalculator provides you with the information to prepare your trip from Hillingdon to Cannock Chase by car or motorbike. It offers you alternative road routes that you can follow to go from Hillingdon to Cannock Chase. It provides driving directions from Hillingdon to Cannock Chase, i.e. where to turn and when, distance of the Hillingdon - Cannock Chase route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Hillingdon to Cannock Chase with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Hillingdon located?

Hillingdon is located in Greater London county and in England. It is situated at an altitude of 57 meters above sea level. Hillingdon has coordinates 51.5351832o,-0.4481378o. RouteCalculator provides a map of Hillingdon from which you can plan your trips to other UK cities.

What is the location of Cannock Chase?

Cannock Chase is located in Staffordshire county and in England. It is situated at an altitude of 175 meters above sea level. Cannock Chase has coordinates 52.7183027o,-1.9858812o. RouteCalculator provides a map of Cannock Chase from which you can plan your trips to other UK cities.