Route from Kensington and Chelsea to Richmond upon Thames

The distance between Kensington and Chelsea and Richmond upon Thames is 6.2 miles. Travel time is 14 minutes.

From: Kensington and Chelsea, County: Greater London, England
To: Richmond upon Thames, County: Greater London, England
6.2 mi , 14 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Kensington and Chelsea to Richmond upon Thames on map



Driving directions from Kensington and Chelsea to Richmond upon Thames

6.2 mi 14 min
1.
Head south on Iverna Gardens
314 ft
2.
Turn right onto Abingdon Villas
1011 ft
3.
Turn left onto Earl's Court Road (B316)
1114 ft
4.
Take the ramp onto West Cromwell Road (A4)
0.6 mi
5.
Continue onto Talgarth Road (A4)
0.5 mi
6.
Continue onto Hammersmith Flyover (A4)
0.7 mi
7.
Continue onto Great West Road (A4)
0.9 mi
8.
Enter Hogarth Roundabout and take the 2nd exit onto Burlington Lane (A316)
89 ft
9.
Exit the roundabout onto Burlington Lane (A316)
1.3 mi
10.
Continue onto Clifford Avenue (A316)
0.3 mi
11.
Keep right onto Lower Richmond Road (A316)
0.5 mi
12.
Enter Manor Circus and take the 2nd exit onto Lower Mortlake Road (A316)
109 ft
13.
Exit the roundabout onto Lower Mortlake Road (A316)
0.5 mi
14.
Continue onto Richmond Circus (A316)
367 ft
15.
Keep left onto Twickenham Road (A316)
340 ft
16.
Turn left onto Parkshot
719 ft
17.
Continue onto Little Green
533 ft
18.
Turn left onto Duke Street
260 ft
19.
You have arrived at your destination, on the right
0 ft


If you were to travel from Kensington and Chelsea to Richmond upon Thames, how much would it charge you?

A trip with petrol gasoline will cost you 1.1 pounds. According to the figure presented above, the price of petrol corresponds to 144 pence per litre, and the amount of petrol that the vehicle consumes is equivalent to 37.5 miles per gallon.
Through carpooling, the cost of this trip is 0.55 pounds for each of the two passengers.
When there are three people in the automobile, the cost of this trip is 0.37 pounds (1.1/3) for each individual passenger.
This trip will cost you 0.28 pounds for each of the four people who are travelling in the automobile.


The cost of fuel is equal to (6.2 miles / 37.5 miles per gallon) multiplied by 144 pence a litre, which is 1.1 pounds.

A more in-depth explanation of the result is as follows:

Fuel usage is miles multiplied by 4.54609 divided by the distance travelled by the vehicle.Consumption is 6.2 miles multiplied by 4.54609 divided by 37.5 miles per gallon, which equals 0.8 litres

It takes 0.8 litres of fuel.

The cost of fuel is equal to the amount of fuel required multiplied by the price per litre, which is 0.8 litres multiplied by 144 pence a litre, which is 1.1 pounds.

The cost of fuel from Kensington and Chelsea to Richmond upon Thames is 1.1 pounds.
 

 

One thing that can affect fuel consumption is the condition of the road for the following reasons:

  1. Surface Roughness: Rough road surfaces, such as those with potholes, cracks, or uneven pavement, can increase rolling resistance. This means the tires have to work harder to maintain speed, leading to higher fuel consumption.

  2. Friction: Poor road conditions can also increase friction between the tires and the road surface. This friction creates drag, which requires the engine to work harder to overcome. As a result, fuel consumption can increase, especially at higher speeds.

  3. Traffic Congestion: Roads with heavy traffic congestion often involve frequent stops and starts, as well as idling in traffic queues. This constant acceleration and deceleration can lead to increased fuel consumption compared to driving on open, free-flowing roads.

  4. Elevation Changes: Roads with steep inclines or declines can affect fuel consumption, especially for vehicles with less powerful engines. Climbing uphill requires more power from the engine and thus more fuel, while descending downhill may require additional braking and fuel to maintain control.

  5. Weather Conditions: Adverse weather conditions such as rain, snow, or ice can affect road traction and vehicle stability. Drivers may need to adjust their speed and driving behavior, which can impact fuel consumption.

  6. Surface Quality: Smooth road surfaces with good pavement quality generally result in lower fuel consumption compared to rough or poorly maintained roads. This is because smooth roads reduce rolling resistance and allow for more efficient vehicle operation.

Overall, road conditions play a significant role in determining fuel consumption, and drivers may experience variations in fuel efficiency depending on the condition of the roads they are driving on.

Diesel cost from Kensington and Chelsea to Richmond upon Thames.

The trip with diesel fuel costs 0.8 £ (167p/lt, 62.7 mpg).
For 2 passengers: 0.4 £ (0.8/2) /p.
For 3 passengers: 0.27 £ (0.8/3) /p.
For 4 passengers: 0.2 £ (0.8/4) /p.

Where is Kensington and Chelsea located?

Kensington and Chelsea is located in Greater London county and in England. It is situated at an altitude of 11 meters above sea level. Kensington and Chelsea has coordinates 51.4990805o,-0.1938253o. RouteCalculator provides a map of Kensington and Chelsea from which you can plan your trips to other UK cities.

What is the location of Richmond upon Thames?

Richmond upon Thames is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Richmond upon Thames has coordinates 51.4613110o,-0.3037420o. RouteCalculator provides a map of Richmond upon Thames from which you can plan your trips to other UK cities.