Kirkcaldy and Dysart Barry by car, distance and driving time

The distance between Kirkcaldy and Dysart and Barry by car is 432 miles. The driving time is 7 hours and 26 minutes.

How far is Barry from Kirkcaldy and Dysart? The driving distance is 432 miles, depending on the selected route and traffic conditions.

From: Kirkcaldy and Dysart, County: Fife, Scotland
To: Barry, County: , Wales
432 mi , 7 h 26 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Kirkcaldy and Dysart to Barry on map



Driving directions from Kirkcaldy and Dysart to Barry

432 mi 7 h 26 min
1.
Head south on Normand Road (A955)
546 ft
2.
Turn right onto Windmill Road (B928)
0.6 mi
3.
Turn right onto Rosslyn Street (A921)
1134 ft
4.
Enter the roundabout and take the 2nd exit onto A921
322 ft
5.
Exit the roundabout onto A921
0.6 mi
6.
Enter Redhouse Roundabout and take the 1st exit onto A92
20 ft
7.
Exit the roundabout onto A92
10.3 mi
8.
Continue onto M90
859 ft
9.
Continue towards M90 South: Edinburgh
0.9 mi
10.
Keep right towards M90 South: Edinburgh
6.9 mi
11.
Continue onto A90
1.3 mi
12.
Keep right towards M90: Glasgow
2.3 mi
13.
Keep left towards A8: Airport
1.9 mi
14.
Keep right onto M8
5 mi
15.
Take the ramp on the left towards A899
1002 ft
16.
Keep left towards A899
0.4 mi
17.
Go straight onto Livingston Road (A899)
2.4 mi
18.
Enter Lizzie Brice's Roundabout and take the 3rd exit onto Bankton Road (A71)
434 ft
19.
Exit the roundabout onto Bankton Road (A71)
1.4 mi
20.
Enter Newpark Roundabout and take the 2nd exit onto Bankton Road (A71)
197 ft
21.
Exit the roundabout onto Bankton Road (A71)
0.5 mi
22.
Enter Wilderness Roundabout and take the 1st exit onto Brucefield Park North
78 ft
23.
Exit the roundabout onto Brucefield Park North
644 ft
24.
Turn right onto Brucefield Park West
0.4 mi
25.
Continue straight
7.5 mi
26.
Continue onto Auchengray Road
0.6 mi
27.
Make a slight right
3.2 mi
28.
Turn left onto Carnwath Road (B7016)
2.3 mi
29.
Turn right onto A70
1257 ft
30.
Make a slight left onto Lampits Road
0.7 mi
31.
Continue onto Carnwath Road
0.7 mi
32.
Turn left onto Pettinain Road
0.4 mi
33.
Continue onto Tie Road No 2
1.4 mi
34.
Turn right onto Grange Road
0.5 mi
35.
Turn left onto Covington Road
1.5 mi
36.
Turn left to stay on Covington Road
674 ft
37.
Turn right to stay on Covington Road
1.4 mi
38.
Continue onto Boat Road
0.4 mi
39.
Keep left onto Boat Road
269 ft
40.
Turn left onto Sherifflats Road
0.4 mi
41.
Turn left onto A73
8 mi
42.
Enter the roundabout and take the 2nd exit onto A702
269 ft
43.
Exit the roundabout onto A702
1 mi
44.
Enter the roundabout and take the 2nd exit onto A74(M)
212 ft
45.
Exit the roundabout onto A74(M)
49.2 mi
46.
Continue onto M6
98 mi
47.
Keep right onto Preston Bypass (M6)
86 mi
48.
Keep left onto M6
9.4 mi
49.
Keep left onto M5
40 mi
50.
Take the ramp on the left
0.5 mi
51.
Enter Strensham Interchange and take the 2nd exit onto M50
1074 ft
52.
Exit the roundabout onto M50
21.4 mi
53.
Enter Travellers Rest and take the 1st exit onto A449
199 ft
54.
Exit the roundabout onto A449
0.5 mi
55.
Enter the roundabout and take the 3rd exit onto A40
240 ft
56.
Exit the roundabout onto A40
1.4 mi
57.
Enter Wilton Roundabout and take the 3rd exit onto A40
197 ft
58.
Exit the roundabout onto A40
9 mi
59.
Enter the roundabout and take the 2nd exit onto A40
193 ft
60.
Exit the roundabout onto A40
6.9 mi
61.
Continue onto A449
12.9 mi
62.
Take the ramp onto A449
1103 ft
63.
Continue onto M4
487 ft
64.
Keep left onto M4
19.7 mi
65.
Take the ramp on the left
0.4 mi
66.
Exit the roundabout onto A4232
3.1 mi
67.
Take the ramp
0.3 mi
68.
Enter Culverhouse Cross Interchange and take the 2nd exit onto Port Road (A4050)
565 ft
69.
Exit the roundabout onto Port Road (A4050)
0.6 mi
70.
Enter the roundabout and take the 2nd exit onto Port Road (A4050)
98 ft
71.
Exit the roundabout onto Port Road (A4050)
0.3 mi
72.
Continue straight onto Port Road (A4050)
0.6 mi
73.
Continue straight onto Port Road (A4050)
0.3 mi
74.
Enter the roundabout and take the 2nd exit onto Port Road (A4050)
94 ft
75.
Exit the roundabout onto Port Road (A4050)
0.8 mi
76.
Turn right onto Port Road (A4050)
1.5 mi
77.
Enter the roundabout and take the 2nd exit onto Port Road West (A4226)
273 ft
78.
Exit the roundabout onto Port Road West (A4226)
0.9 mi
79.
Enter Waycock Cross and take the 1st exit onto Pontypridd Road (B4266)
20 ft
80.
Exit the roundabout onto Pontypridd Road (B4266)
86 ft
81.
Turn left to stay on Pontypridd Road (B4266)
0.7 mi
82.
Enter the roundabout and take the 2nd exit onto Park Crescent (A4050)
80 ft
83.
Exit the roundabout onto Park Crescent (A4050)
240 ft
84.
Turn left onto Romilly Road
928 ft
85.
Turn left onto Porthkerry Road
302 ft
86.
Turn left to stay on Porthkerry Road
154 ft
87.
Make a slight right onto Queen Street
616 ft
88.
Turn right onto Island Road
357 ft
89.
You have arrived at your destination, on the left
0 ft


How much is the expense of driving from Kirkcaldy and Dysart to Barry?

The expense of driving from Kirkcaldy and Dysart to Barry using petrol amounts to £75.4. This computation is based on a petrol price of 144 pence per liter and a car's fuel efficiency of 37.5 miles per gallon. For those considering carpooling arrangements, the cost per passenger decreases with more occupants. With two passengers, the cost per person is £37.7 (£75.4 divided by 2). With three passengers, it's approximately £25.13 per person (£75.4 divided by 3), and with four passengers, it's £18.85 per person (£75.4 divided by 4).

To delve deeper into the calculations, we can explore the fuel cost calculation. This is determined by the distance traveled and the car's fuel consumption rate. For this journey, approximately 52.4 liters of fuel would be required. Multiplying this by the petrol price per liter results in the total fuel cost of £75.4 for the trip from Kirkcaldy and Dysart to Barry.
 

 

Road conditions affect fuel usage for the following reasons:

Surface Roughness: Potholes, fissures, and uneven pavement increase rolling resistance. This makes the tires work harder to maintain speed, increasing fuel consumption.

Tire-road surface friction increases with poor road conditions. Friction causes drag, which makes the engine work harder. Therefore, fuel usage might rise, especially at high speeds.

Traffic Congestion: Heavy traffic causes stops and idling in traffic queues. Constant acceleration and deceleration might increase fuel consumption compared to open roadways.

Elevation Changes: Steep inclines or falls can effect fuel usage, especially for smaller engines. Uphill climbing takes more engine power and petrololine, whereas descending downhill may require more braking and fuel to regulate.

Rain, snow, and ice can impair road traction and vehicle stability. Adjusting speed and driving behavior can affect fuel consumption.

Good pavement and smooth roads use less fuel than rough or badly maintained roads. Smooth roads reduce rolling resistance and improve vehicle efficiency.

Road conditions greatly affect fuel use, so drivers' fuel economy may vary.

Diesel cost from Kirkcaldy and Dysart to Barry.

The trip with diesel fuel costs 52.3 £ (167p/lt, 62.7 mpg).
For 2 passengers: 26.15 £ (52.3/2) /p.
For 3 passengers: 17.43 £ (52.3/3) /p.
For 4 passengers: 13.08 £ (52.3/4) /p.

Alternative routes from Kirkcaldy and Dysart to Barry

The slowest route from Kirkcaldy and Dysart to the Barry is 420.13 miles and takes 7 hours and 49 minutes.

Which is the cheapest route from Kirkcaldy and Dysart to Barry by car?

The cheapest route from Kirkcaldy and Dysart to Barry is the second suggested route (420mi, 7h 49min) and costs 73.3 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The most expensive route from Kirkcaldy and Dysart to Barry is the first suggested route (432mi, 7h 26min) and costs 75.4 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Kirkcaldy and Dysart to Barry?

There are two suggested routes. The fastest route is 432mi (distance from Kirkcaldy and Dysart to Barry) and its duration is 7h 26min. The slowest route is 420mi, and its duration is 7h 49min.

RouteCalculator provides you with the information to prepare your trip from Kirkcaldy and Dysart to Barry by car or motorbike. It offers you alternative road routes that you can follow to go from Kirkcaldy and Dysart to Barry. It provides driving directions from Kirkcaldy and Dysart to Barry, i.e. where to turn and when, distance of the Kirkcaldy and Dysart - Barry route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Kirkcaldy and Dysart to Barry with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Kirkcaldy and Dysart located?

Kirkcaldy and Dysart is located in Fife county and in Scotland. It is situated at an altitude of 49 meters above sea level. Kirkcaldy and Dysart has coordinates 56.1279110o,-3.1229330o. RouteCalculator provides a map of Kirkcaldy and Dysart from which you can plan your trips to other UK cities.

What is the location of Barry?

Barry is located in Wales. It is situated at an altitude of 17 meters above sea level. Barry has coordinates 51.3997529o,-3.2825859o. RouteCalculator provides a map of Barry from which you can plan your trips to other UK cities.