Lancaster Ribble Valley by car, distance and driving time

The distance between Lancaster and Ribble Valley by car is 21.7 miles. The driving time is 43 minutes.

How far is Ribble Valley from Lancaster? The driving distance is 21.7 miles, depending on the selected route and traffic conditions.

From: Lancaster, County: Lancashire, England
To: Ribble Valley, County: Lancashire, England
21.7 mi , 43 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Lancaster to Ribble Valley on map



Driving directions from Lancaster to Ribble Valley

21.7 mi 43 min
1.
Head northwest on King Street (A6)
383 ft
2.
Turn right onto Common Garden Street
425 ft
3.
Continue onto Brock Street
370 ft
4.
Turn right onto Thurnham Street (A6)
1061 ft
5.
Continue onto South Road (A6)
1076 ft
6.
Enter The Pointer and take the 1st exit onto Bowerham Road
10 ft
7.
Exit the roundabout onto Bowerham Road
0.7 mi
8.
Turn left to stay on Bowerham Road
0.7 mi
9.
Continue onto Blea Tarn Road
0.8 mi
10.
Continue onto Procter Moss Road
3.6 mi
11.
Turn left onto Abbeystead Road
1.9 mi
12.
Continue slightly right onto Abbeystead Lane
0.4 mi
13.
Continue onto Strait Lane
0.6 mi
14.
Continue onto Long Lane
0.3 mi
15.
Turn right
1.3 mi
16.
Continue onto Trough Road
5.9 mi
17.
Turn left
2.7 mi
18.
Make a slight right
299 ft
19.
Go straight onto B6478
1.2 mi
20.
Turn right
1 mi
21.
You have arrived at your destination, on the left
0 ft


How much does it cost to drive from Lancaster to Ribble Valley with petrol?

Driving from Lancaster to Ribble Valley costs £3.8 with petrol. The calculation assumes a petrol price of 144 pence per liter and a car's petrol consumption of 37.5 miles per gallon. Carpooling with two passengers brings the cost down to £1.9 per person. With three passengers, it's £1.27 per person, and with four passengers, it's £0.95 per person. The fuel cost for the trip is derived from the distance and car fuel consumption, totaling 2.6 liters of fuel. This results in a £3.8 fuel cost for the journey.
 

Diesel cost from Lancaster to Ribble Valley.

The trip with diesel fuel costs 2.6 £ (167p/lt, 62.7 mpg).
For 2 passengers: 1.3 £ (2.6/2) /p.
For 3 passengers: 0.87 £ (2.6/3) /p.
For 4 passengers: 0.65 £ (2.6/4) /p.

Diesel fuel and gasoline (petrol) fuel have differences:

  1. Emissions: Diesel fuel combustion typically produces higher levels of nitrogen oxides (NOx) and particulate matter compared to petrol combustion. However, advancements in diesel engine technology, such as particulate filters and selective catalytic reduction (SCR) systems, have significantly reduced emissions from modern diesel vehicles.

  2. Availability and Pricing: The availability and pricing of diesel fuel and petrol can vary by region and depend on factors such as government subsidies, taxes, and infrastructure. In some regions, diesel fuel may be more readily available or cheaper than petrol, influencing consumer choices and vehicle preferences.

Alternative routes from Lancaster to Ribble Valley

The second route from Lancaster to the Ribble Valley is 29.97 miles and takes 47 minutes.

Which is the cheapest route from Lancaster to Ribble Valley by car?

The cheapest route from Lancaster to Ribble Valley is the first suggested route (21.7mi, 43min) and costs 3.8 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The most expensive route from Lancaster to Ribble Valley is the second suggested route (30mi, 47min) and costs 5.2 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Lancaster to Ribble Valley?

There are two suggested routes. The fastest route is 21.7mi (distance from Lancaster to Ribble Valley) and its duration is 43min. The slowest route is 30mi, and its duration is 47min.

RouteCalculator provides you with the information to prepare your trip from Lancaster to Ribble Valley by car or motorbike. It offers you alternative road routes that you can follow to go from Lancaster to Ribble Valley. It provides driving directions from Lancaster to Ribble Valley, i.e. where to turn and when, distance of the Lancaster - Ribble Valley route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Lancaster to Ribble Valley with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Lancaster located?

Lancaster is located in Lancashire county and in England. It is situated at an altitude of 24 meters above sea level. Lancaster has coordinates 54.0465750o,-2.8007399o. RouteCalculator provides a map of Lancaster from which you can plan your trips to other UK cities.

What is the location of Ribble Valley?

Ribble Valley is located in Lancashire county and in England. It is situated at an altitude of 218 meters above sea level. Ribble Valley has coordinates 53.9289626o,-2.4627718o. RouteCalculator provides a map of Ribble Valley from which you can plan your trips to other UK cities.