Route from Maldon to Barking and Dagenham

The distance between Maldon and Barking and Dagenham is 31.1 miles. Travel time is 40 minutes.

From: Maldon, County: Essex, England
To: Barking and Dagenham, County: Greater London, England
31.1 mi , 40 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Maldon to Barking and Dagenham on map



Driving directions from Maldon to Barking and Dagenham

31.1 mi 40 min
1.
Head northeast
139 ft
2.
Turn left onto London Road
0.5 mi
3.
Continue onto Old London Road
2.4 mi
4.
Turn left onto London Road
0.3 mi
5.
Continue onto Runsell Green
0.4 mi
6.
Turn right onto Maldon Road (A414)
0.7 mi
7.
Make a slight right onto Main Road (A414)
0.5 mi
8.
Continue onto Bell Hill (A414)
0.3 mi
9.
Continue onto Main Road (A414)
1 mi
10.
Continue onto Maldon Road (A414)
0.4 mi
11.
Enter the roundabout and take the 1st exit onto Chelmsford Bypass (A12)
28 ft
12.
Exit the roundabout onto Chelmsford Bypass (A12)
1288 ft
13.
Merge right onto Chelmsford Bypass (A12)
5.8 mi
14.
Continue onto Margaretting Bypass (A12)
1.4 mi
15.
Continue onto Ingatestone Bypass (A12)
3.6 mi
16.
Continue onto Brentwood Bypass (A12)
4.2 mi
17.
Continue onto Colchester Road (A12)
2.7 mi
18.
Enter Gallows Corner and take the 3rd exit onto Eastern Avenue East (A12)
248 ft
19.
Exit the roundabout onto Eastern Avenue East (A12)
3.4 mi
20.
Take the ramp on the left onto Eastern Avenue West (A1112)
252 ft
21.
Make a slight left onto Whalebone Lane North (A1112)
0.6 mi
22.
Continue onto Whalebone Lane South (A1112)
0.8 mi
23.
Turn right onto Wood Lane (A124)
1.1 mi
24.
Turn left onto Porters Avenue (A1153)
0.3 mi
25.
Turn left onto Wren Road
665 ft
26.
You have arrived at your destination, on the right
0 ft


How much does it cost to drive from Maldon to Barking and Dagenham with petrol?

Let's delve into the expenses of a road trip from Maldon to Barking and Dagenham. The journey using petrol will set you back 5.4 pounds. Now, let's walk through how we arrived at this figure.

Firstly, we consider the price of petrol, which is 144 pence per liter. Next, we take into account the car's fuel consumption rate, which stands at 37.5 miles per gallon.

Now, suppose you're carpooling. If there are two passengers sharing the ride, each person will contribute 2.7 pounds (£5.4 divided by 2). With three passengers, the cost per person drops to around 1.8 pounds (£5.4 divided by 3). And if there are four passengers onboard, each person chips in 1.35 pounds (£5.4 divided by 4).

Let's delve deeper into the calculations. To determine how much fuel is needed for the trip, we rely on the distance and the car's fuel efficiency. The distance between Maldon and Barking and Dagenham is approximately 31.13 miles. So, to cover this distance, the car will require roughly 3.8 liters of petrol. We obtained this value by dividing the distance by the car's fuel consumption rate of 37.5 miles per gallon and then converting it to liters.

Once we have the amount of fuel needed, we calculate the total cost. Multiplying the fuel quantity (3.8 liters) by the price per liter (144 pence) yields 5.4 pounds. Therefore, the fuel cost for the journey from Maldon to Barking and Dagenham is 5.4 pounds.
 

Diesel cost from Maldon to Barking and Dagenham.

The trip with diesel fuel costs 3.8 £ (167p/lt, 62.7 mpg).
For 2 passengers: 1.9 £ (3.8/2) /p.
For 3 passengers: 1.27 £ (3.8/3) /p.
For 4 passengers: 0.95 £ (3.8/4) /p.

Alternative routes from Maldon to Barking and Dagenham

Meanwhile, the least speedy route from Maldon to Barking and Dagenham covers 39.35 miles and necessitates 48 minutes for completion.

Which is the cheapest route from Maldon to Barking and Dagenham by car?

The cheapest route from Maldon to Barking and Dagenham is the first suggested route (31.1mi, 40min) and costs 5.4 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The most expensive route from Maldon to Barking and Dagenham is the second suggested route (39.3mi, 48min) and costs 6.9 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Maldon to Barking and Dagenham?

There are two suggested routes. The fastest route is 31.1mi (distance from Maldon to Barking and Dagenham) and its duration is 40min. The slowest route is 39.3mi, and its duration is 48min.

RouteCalculator provides you with the information to prepare your trip from Maldon to Barking and Dagenham by car or motorbike. It offers you alternative road routes that you can follow to go from Maldon to Barking and Dagenham. It provides driving directions from Maldon to Barking and Dagenham, i.e. where to turn and when, distance of the Maldon - Barking and Dagenham route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Maldon to Barking and Dagenham with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Maldon located?

Maldon is located in Essex county and in England. It is situated at an altitude of 38 meters above sea level. Maldon has coordinates 51.7318050o,0.6714480o. RouteCalculator provides a map of Maldon from which you can plan your trips to other UK cities.

What is the location of Barking and Dagenham?

Barking and Dagenham is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Barking and Dagenham has coordinates 51.5464828o,0.1293497o. RouteCalculator provides a map of Barking and Dagenham from which you can plan your trips to other UK cities.