Route from Maldon to Southwark

The distance between Maldon and Southwark is 43.4 miles. Travel time is 1 hour and 9 minutes.

From: Maldon, County: Essex, England
To: Southwark, County: Greater London, England
43.4 mi , 1 h 9 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Maldon to Southwark on map



Driving directions from Maldon to Southwark

43.4 mi 1 h 9 min
1.
Head northeast
139 ft
2.
Turn left onto London Road
0.5 mi
3.
Continue onto Old London Road
2.4 mi
4.
Turn left onto London Road
0.3 mi
5.
Continue onto Runsell Green
0.4 mi
6.
Turn right onto Maldon Road (A414)
0.7 mi
7.
Make a slight right onto Main Road (A414)
0.5 mi
8.
Continue onto Bell Hill (A414)
0.3 mi
9.
Continue onto Main Road (A414)
1 mi
10.
Continue onto Maldon Road (A414)
0.4 mi
11.
Enter the roundabout and take the 1st exit onto Chelmsford Bypass (A12)
28 ft
12.
Exit the roundabout onto Chelmsford Bypass (A12)
1288 ft
13.
Merge right onto Chelmsford Bypass (A12)
5.8 mi
14.
Continue onto Margaretting Bypass (A12)
1.4 mi
15.
Continue onto Ingatestone Bypass (A12)
3.6 mi
16.
Continue onto Brentwood Bypass (A12)
4.2 mi
17.
Continue onto Colchester Road (A12)
2.7 mi
18.
Enter Gallows Corner and take the 3rd exit onto Eastern Avenue East (A12)
248 ft
19.
Exit the roundabout onto Eastern Avenue East (A12)
6.9 mi
20.
Enter Gants Hill Roundabout and take the 2nd exit onto Eastern Avenue (A12)
184 ft
21.
Exit the roundabout onto Eastern Avenue (A12)
0.9 mi
22.
Enter Redbridge Roundabout and take the 3rd exit onto Eastern Avenue (A12)
681 ft
23.
Exit the roundabout onto Eastern Avenue (A12)
3.5 mi
24.
Continue onto East Cross Route (A12)
1.5 mi
25.
Take the ramp on the left onto A12
1084 ft
26.
Turn right onto Wick Lane (B142)
149 ft
27.
Turn right onto Tredegar Road (B142)
745 ft
28.
Turn right onto Parnell Road (B142)
739 ft
29.
Turn left onto Roman Road (B119)
0.3 mi
30.
Turn left onto Roman Road (B119)
1.1 mi
31.
Turn right onto Cambridge Heath Road (A107)
48 ft
32.
Turn left onto Bethnal Green Road (A1209)
1 mi
33.
Turn left onto Shoreditch High Street (A10)
829 ft
34.
Continue onto Norton Folgate (A10)
389 ft
35.
Turn right onto Primrose Street
645 ft
36.
Turn left onto Appold Street
522 ft
37.
Continue onto Sun Street (B100)
996 ft
38.
Continue onto Chiswell Street (B100)
1181 ft
39.
Continue onto Beech Street (B100)
1190 ft
40.
Continue onto Long Lane
1263 ft
41.
Turn right onto East Poultry Avenue
315 ft
42.
Turn left onto Charterhouse Street
1156 ft
43.
Continue onto New Fetter Lane (A4)
789 ft
44.
Continue onto Fetter Lane (A4)
692 ft
45.
Turn right onto Fleet Street (A4)
618 ft
46.
Continue onto Strand (A4)
702 ft
47.
Turn right onto Aldwych (A4)
0.3 mi
48.
Continue onto Strand (A4)
0.5 mi
49.
Enter Charing Cross and exit onto Charing Cross
277 ft
50.
You have arrived at your destination, on the right
0 ft


How much does it cost to drive from Maldon to Southwark with petrol?

Let's delve into the expenses of a road trip from Maldon to Southwark. The journey using petrol will set you back 7.6 pounds. Now, let's walk through how we arrived at this figure.

Firstly, we consider the price of petrol, which is 144 pence per liter. Next, we take into account the car's fuel consumption rate, which stands at 37.5 miles per gallon.

Now, suppose you're carpooling. If there are two passengers sharing the ride, each person will contribute 3.8 pounds (£7.6 divided by 2). With three passengers, the cost per person drops to around 2.53 pounds (£7.6 divided by 3). And if there are four passengers onboard, each person chips in 1.9 pounds (£7.6 divided by 4).

Let's delve deeper into the calculations. To determine how much fuel is needed for the trip, we rely on the distance and the car's fuel efficiency. The distance between Maldon and Southwark is approximately 43.41 miles. So, to cover this distance, the car will require roughly 5.3 liters of petrol. We obtained this value by dividing the distance by the car's fuel consumption rate of 37.5 miles per gallon and then converting it to liters.

Once we have the amount of fuel needed, we calculate the total cost. Multiplying the fuel quantity (5.3 liters) by the price per liter (144 pence) yields 7.6 pounds. Therefore, the fuel cost for the journey from Maldon to Southwark is 7.6 pounds.
 

 

The state of the road might impact fuel usage due to many factors.

Surface roughness refers to the unevenness of road surfaces, which can be caused by potholes, fractures, or uneven pavement. This unevenness can lead to an increase in rolling resistance. Consequently, the tires must exert more effort to sustain velocity, resulting in increased fuel consumption.

Friction: The presence of inadequate road conditions can augment the level of friction between the tires and the road surface. The friction between surfaces generates drag, necessitating the engine to exert more effort to overcome it. Consequently, the use of fuel might escalate, particularly when driving at higher velocities.

Traffic congestion refers to the situation where roads experience a high volume of vehicles, resulting in frequent halts, starts, and prolonged waiting in traffic lines. The consistent acceleration and deceleration can result in higher fuel usage when compared to driving on uncongested, unrestricted roadways.

Changes in elevation can have an impact on fuel usage, particularly for vehicles equipped with less powerful engines, when encountering roads with steep inclines or drops. Ascending a slope necessitates greater engine power and consequently more fuel consumption, but descending a decline may necessitate additional braking and fuel usage to maintain control.

Weather Conditions: Inclement weather conditions, including precipitation such as rain, snow, or ice, can have a detrimental impact on road grip and the stability of vehicles. Motorists may be required to modify their velocity and driving conduct, which can have an effect on fuel usage.

Surface Quality: Smooth road surfaces with high-quality pavement often lead to decreased fuel consumption in comparison to rough or inadequately maintained roads. The reason for this is that smooth roads decrease rolling resistance, hence enabling more efficient vehicle performance.

In general, the quality of roads has a substantial impact on petrololine consumption, and drivers may encounter differences in fuel economy based on the state of the roads they are traveling on.

Diesel cost from Maldon to Southwark.

The trip with diesel fuel costs 5.3 £ (167p/lt, 62.7 mpg).
For 2 passengers: 2.65 £ (5.3/2) /p.
For 3 passengers: 1.77 £ (5.3/3) /p.
For 4 passengers: 1.33 £ (5.3/4) /p.

Alternative routes from Maldon to Southwark

Meanwhile, the least speedy route from Maldon to Southwark covers 52.3 miles and necessitates 1 hour and 18 minutes for completion.

Which is the cheapest route from Maldon to Southwark by car?

The cheapest route from Maldon to Southwark is the first suggested route (43.4mi, 1h 9min) and costs 7.6 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The most expensive route from Maldon to Southwark is the second suggested route (52.3mi, 1h 18min) and costs 9.1 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Maldon to Southwark?

There are two suggested routes. The fastest route is 43.4mi (distance from Maldon to Southwark) and its duration is 1h 9min. The slowest route is 52.3mi, and its duration is 1h 18min.

RouteCalculator provides you with the information to prepare your trip from Maldon to Southwark by car or motorbike. It offers you alternative road routes that you can follow to go from Maldon to Southwark. It provides driving directions from Maldon to Southwark, i.e. where to turn and when, distance of the Maldon - Southwark route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Maldon to Southwark with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Maldon located?

Maldon is located in Essex county and in England. It is situated at an altitude of 38 meters above sea level. Maldon has coordinates 51.7318050o,0.6714480o. RouteCalculator provides a map of Maldon from which you can plan your trips to other UK cities.

What is the location of Southwark?

Southwark is located in Greater London county and in England. It is situated at an altitude of 8 meters above sea level. Southwark has coordinates 51.5073509o,-0.1277583o. RouteCalculator provides a map of Southwark from which you can plan your trips to other UK cities.