Maldon Tonbridge and Malling by car, distance and driving time

The distance between Maldon and Tonbridge and Malling by car is 50.2 miles. The driving time is 55 minutes.

How far is Tonbridge and Malling from Maldon? The driving distance is 50.2 miles, depending on the selected route and traffic conditions.

From: Maldon, County: Essex, England
To: Tonbridge and Malling, County: Kent, England
50.2 mi , 55 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Maldon to Tonbridge and Malling on map



Driving directions from Maldon to Tonbridge and Malling

50.2 mi 55 min
1.
Head northeast
139 ft
2.
Turn left onto London Road
0.5 mi
3.
Continue onto Old London Road
2.4 mi
4.
Turn left onto London Road
0.3 mi
5.
Continue onto Runsell Green
0.4 mi
6.
Turn right onto Maldon Road (A414)
0.7 mi
7.
Make a slight right onto Main Road (A414)
0.5 mi
8.
Continue onto Bell Hill (A414)
0.3 mi
9.
Continue onto Main Road (A414)
1 mi
10.
Continue onto Maldon Road (A414)
0.4 mi
11.
Enter the roundabout and take the 1st exit onto Chelmsford Bypass (A12)
28 ft
12.
Exit the roundabout onto Chelmsford Bypass (A12)
1288 ft
13.
Merge right onto Chelmsford Bypass (A12)
5.8 mi
14.
Continue onto Margaretting Bypass (A12)
1.4 mi
15.
Continue onto Ingatestone Bypass (A12)
3.6 mi
16.
Continue onto Brentwood Bypass (A12)
4.2 mi
17.
Take the ramp on the left onto A12
1197 ft
18.
Enter Brook Street Roundabout and take the 2nd exit onto M25
235 ft
19.
Exit the roundabout onto M25
7.9 mi
20.
Continue towards M25: (M20
5.3 mi
21.
Continue towards M25: Dover (M20)
2.7 mi
22.
Take the ramp on the left towards M20: Dover
1.5 mi
23.
Merge right onto M20
6.4 mi
24.
Take the ramp on the left towards A20: Paddock Wood
0.3 mi
25.
Enter the roundabout and take the 3rd exit onto London Road (A20)
185 ft
26.
Exit the roundabout onto London Road (A20)
0.9 mi
27.
Enter the roundabout and take the 3rd exit onto London Road (A20)
160 ft
28.
Exit the roundabout onto London Road (A20)
0.3 mi
29.
Enter the roundabout and take the 2nd exit towards Maidstone
105 ft
30.
Exit the roundabout towards Maidstone
0.8 mi
31.
Enter Wrotham Heath Junction and take the 2nd exit onto London Road (A20)
639 ft
32.
Exit the roundabout onto London Road (A20)
0.6 mi
33.
Enter the roundabout and take the 2nd exit onto Seven Mile Lane (B2016)
127 ft
34.
Exit the roundabout onto Seven Mile Lane (B2016)
1 mi
35.
You have arrived at your destination, on the left
0 ft


How much is the expense of driving from Maldon to Tonbridge and Malling?

The expense of driving from Maldon to Tonbridge and Malling using petrol amounts to £8.8. This computation is based on a petrol price of 144 pence per liter and a car's fuel efficiency of 37.5 miles per gallon. For those considering carpooling arrangements, the cost per passenger decreases with more occupants. With two passengers, the cost per person is £4.4 (£8.8 divided by 2). With three passengers, it's approximately £2.93 per person (£8.8 divided by 3), and with four passengers, it's £2.2 per person (£8.8 divided by 4).

To delve deeper into the calculations, we can explore the fuel cost calculation. This is determined by the distance traveled and the car's fuel consumption rate. For this journey, approximately 6.1 liters of fuel would be required. Multiplying this by the petrol price per liter results in the total fuel cost of £8.8 for the trip from Maldon to Tonbridge and Malling.
 

Diesel cost from Maldon to Tonbridge and Malling.

The trip with diesel fuel costs 6.1 £ (167p/lt, 62.7 mpg).
For 2 passengers: 3.05 £ (6.1/2) /p.
For 3 passengers: 2.03 £ (6.1/3) /p.
For 4 passengers: 1.53 £ (6.1/4) /p.

Diesel cars generally have lower fuel consumption compared to petrol cars for the following reasons:

  1. Higher Energy Density of Diesel Fuel: Diesel fuel contains more energy per liter compared to petrol. This means that for the same volume of fuel, diesel engines can generate more power and travel a greater distance, resulting in lower fuel consumption.

  2. Increased Thermal Efficiency of Diesel Engines: Diesel engines operate at higher compression ratios compared to petrol engines. This higher compression ratio allows diesel engines to extract more energy from each unit of fuel. As a result, diesel engines are typically more thermally efficient, translating into lower fuel consumption.

  3. Greater Torque at Lower RPM: Diesel engines tend to produce more torque at lower engine speeds (RPM) compared to petrol engines. This characteristic allows diesel vehicles to maintain better fuel efficiency, particularly during steady-state cruising, as they require less throttle input to maintain speed.

These factors combined contribute to the generally lower fuel consumption observed in diesel cars compared to their petrol counterparts.

Alternative routes from Maldon to Tonbridge and Malling

The second route from Maldon to the Tonbridge and Malling is 50.14 miles and takes 56 minutes.

The third route from Maldon to the Tonbridge and Malling is 49.44 miles and takes 1 hour and 2 minutes.

Which is the cheapest route from Maldon to Tonbridge and Malling by car?

The cheapest route from Maldon to Tonbridge and Malling is the suggested route (0ft, ) and costs £ (petrol fuel cost, 144p/lt, 37.5mpg).

The second cheapest route from Maldon to Tonbridge and Malling is the suggested route (0ft, ) and costs £.

The most expensive route from Maldon to Tonbridge and Malling is the suggested route (0ft, ) and costs £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Maldon to Tonbridge and Malling?

There are three suggested routes. The fastest route is 50.2mi (distance from Maldon to Tonbridge and Malling) and its duration is 55min. The other route is 50.1mi, and its duration is 56min. The slowest route is 49.4mi, and its duration is 1h 2min.

RouteCalculator provides you with the information to prepare your trip from Maldon to Tonbridge and Malling by car or motorbike. It offers you alternative road routes that you can follow to go from Maldon to Tonbridge and Malling. It provides driving directions from Maldon to Tonbridge and Malling, i.e. where to turn and when, distance of the Maldon - Tonbridge and Malling route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Maldon to Tonbridge and Malling with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Maldon located?

Maldon is located in Essex county and in England. It is situated at an altitude of 38 meters above sea level. Maldon has coordinates 51.7318050o,0.6714480o. RouteCalculator provides a map of Maldon from which you can plan your trips to other UK cities.

What is the location of Tonbridge and Malling?

Tonbridge and Malling is located in Kent county and in England. It is situated at an altitude of 114 meters above sea level. Tonbridge and Malling has coordinates 51.2836073o,0.3502788o. RouteCalculator provides a map of Tonbridge and Malling from which you can plan your trips to other UK cities.