Route from Melton to Harborough

The distance between Melton and Harborough is 22 miles. Travel time is 34 minutes.

From: Melton, County: Leicestershire, England
To: Harborough, County: Leicestershire, England
22 mi , 34 min
Tolls: Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Melton to Harborough on map



Driving directions from Melton to Harborough

22 mi 34 min
1.
Head east on Main Street
0.5 mi
2.
Turn right
0.7 mi
3.
Turn right
1.2 mi
4.
Make a slight right
297 ft
5.
Make a slight right onto Thorpe Side
398 ft
6.
Turn left onto Church Street
167 ft
7.
Turn right to stay on Church Street
534 ft
8.
Make a slight left onto King Street
0.4 mi
9.
Continue onto Melton Road
1.2 mi
10.
Continue onto Scalford Road
0.6 mi
11.
Enter the roundabout and take the 1st exit onto Scalford Road
174 ft
12.
Exit the roundabout onto Scalford Road
1.2 mi
13.
Turn right onto Norman Way (A607)
0.4 mi
14.
Turn left onto Dalby Road (B6047)
3 mi
15.
Turn left onto Woodgate Hill
0.3 mi
16.
Turn right onto Burrough End
876 ft
17.
Turn left onto Thorpe Satchville Road (B6047)
1.2 mi
18.
Continue onto Great Dalby Road (B6047)
0.4 mi
19.
Continue onto Main Street (B6047)
0.3 mi
20.
Go straight onto Twyford Road (B6047)
0.4 mi
21.
Continue onto Thorpe Satchville Road (B6047)
0.4 mi
22.
Continue onto Main Road (B6047)
594 ft
23.
Continue onto Tilton Road (B6047)
715 ft
24.
Continue slightly right onto Thimble Hall Road (B6047)
0.8 mi
25.
Continue onto Melton Road (B6047)
2.8 mi
26.
Continue onto Leicester Road (B6047)
0.5 mi
27.
Continue onto Melton Road (B6047)
1.5 mi
28.
Turn right onto Harborough Road (B6047)
2.1 mi
29.
Go straight onto New Inn Lane (B6047)
1 mi
30.
Continue onto Melton Road (B6047)
0.5 mi
31.
You have arrived at your destination
0 ft


What's the expense of traveling from Melton to Harborough by car?

If you're using petrol, you're looking at an expense of 3.8 quid. Now, how do we get to that number? Let's break it down.

First off, we need to consider the price of petrol. In this calculation, it's set at 143 pence per liter. Then, we need to know how thirsty your car is. The fuel consumption rate for this ride is 37.5 miles per gallon.

Now, if you're carpooling, the cost gets divvied up. For two people sharing the ride, it's gonna be 1.9 quid each (£3.8 divided by 2). If you've got three folks in the car, the cost per person comes down to about 1.27 quid (£3.8 divided by 3). And if it's a full house with four passengers, each person chips in 0.95 quid (£3.8 divided by 4).

Let's dive into the nitty-gritty of the calculations. To figure out how much fuel you need for the trip, it's all about distance and fuel efficiency. The distance between Melton and Harborough is about 21.97 miles. So, to cover that distance, your car's gonna need approximately 2.7 liters of petrol. We got that number by dividing the distance by the car's fuel consumption rate of 37.5 miles per gallon and then converting it to liters 'cause that's what we use here.

Once we know how much fuel we need, we can calculate the total cost. Multiply the amount of fuel (2.7 liters) by the price per liter (143 pence), and you get 3.8 quid. So, there you have it, the fuel cost for your journey from Melton to Harborough: 3.8 pounds.
 

 

The fuel economy is highly sensitive to the state of the vehicle. In this way:

The effectiveness of the engine's fuel combustion and its overall consumption are both improved with regular engine maintenance. Maintaining your engine with routine oil changes, air filter replacements, and tune-ups will keep it running at its best.

Problems with the fuel system, including blocked injectors or a malfunctioning oxygen sensor, can cause petrololine to burn improperly and increase consumption. Preventing such problems requires regular maintenance and rapid repairs.

Problems with tires: When the tires are worn down or not inflated properly, the vehicle has to use more energy (and fuel) to go forward because of the increased rolling resistance. You may enhance your fuel efficiency by changing worn-out tires and keeping them properly inflated.

Aerodynamics: If the body of the vehicle is dented or has panels that aren't flush with the body, airflow will be disrupted and aerodynamic drag will increase, resulting in increased fuel consumption. The best aerodynamic performance is possible with a well-maintained vehicle body.


Diesel cost from Melton to Harborough.

The trip with diesel fuel costs 2.4 £ (151p/lt, 62.7 mpg).
For 2 passengers: 1.2 £ (2.4/2) /p.
For 3 passengers: 0.8 £ (2.4/3) /p.
For 4 passengers: 0.6 £ (2.4/4) /p.


Where is Melton located?

Melton is located in Leicestershire county and in England. It is situated at an altitude of 133 meters above sea level. Melton has coordinates 52.8282784o,-0.8432685o. RouteCalculator provides a map of Melton from which you can plan your trips to other UK cities.


What is the location of Harborough?

Harborough is located in Leicestershire county and in England. It is situated at an altitude of 131 meters above sea level. Harborough has coordinates 52.5708762o,-0.9346458o. RouteCalculator provides a map of Harborough from which you can plan your trips to other UK cities.