Route from Melton to Reigate and Banstead

The distance between Melton and Reigate and Banstead is 155 miles. Travel time is 2 hours and 41 minutes.

From: Melton, County: Leicestershire, England
To: Reigate and Banstead, County: Surrey, England
155 mi , 2 h 41 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Melton to Reigate and Banstead on map



Driving directions from Melton to Reigate and Banstead

155 mi 2 h 41 min
1.
Head east on Main Street
0.5 mi
2.
Turn right
0.7 mi
3.
Turn right
1.2 mi
4.
Make a slight right
297 ft
5.
Make a slight right onto Thorpe Side
398 ft
6.
Continue onto Church Street
595 ft
7.
Turn right onto King Street
532 ft
8.
Continue slightly left onto Melton Road
1 mi
9.
Make a sharp left onto Landyke Lane
1.4 mi
10.
Turn right onto Stone Penn Lane
126 ft
11.
Turn left
2.6 mi
12.
Continue onto Six Hills Lane
3.5 mi
13.
Take the ramp on the left onto Six Hills Lane
925 ft
14.
Merge right onto A46
6.1 mi
15.
Enter Hobby Horse Roundabout and take the 3rd exit onto A46
352 ft
16.
Exit the roundabout onto A46
6.8 mi
17.
Continue towards M1: London
79 mi
18.
Take the ramp on the left towards M25: Stansted
0.4 mi
19.
Keep right towards M25: Heathrow
0.6 mi
20.
Merge right onto M25
46 mi
21.
Take the ramp on the left towards A217: Sutton
1017 ft
22.
Enter Reigate Hill Interchange and take the 1st exit onto Brighton Road (A217)
65 ft
23.
Exit the roundabout onto Brighton Road (A217)
0.6 mi
24.
Enter the roundabout and take the 1st exit onto Brighton Road (A217)
116 ft
25.
Exit the roundabout onto Brighton Road (A217)
1.1 mi
26.
Enter the roundabout and take the 1st exit onto Brighton Road (A217)
120 ft
27.
Exit the roundabout onto Brighton Road (A217)
1 mi
28.
Keep right at the fork
386 ft
29.
Make a slight left onto Bonsor Drive (B2032)
0.5 mi
30.
Turn right onto Waterhouse Lane (B2032)
0.5 mi
31.
Turn right onto Sandy Lane
0.7 mi
32.
You have arrived at your destination, on the left
0 ft


If you were to travel from Melton to Reigate and Banstead, how much would it charge you?

A trip with petrol gasoline will cost you 27.1 pounds. According to the figure presented above, the price of petrol corresponds to 144 pence per litre, and the amount of petrol that the vehicle consumes is equivalent to 37.5 miles per gallon.
Through carpooling, the cost of this trip is 13.55 pounds for each of the two passengers.
When there are three people in the automobile, the cost of this trip is 9.03 pounds (27.1/3) for each individual passenger.
This trip will cost you 6.78 pounds for each of the four people who are travelling in the automobile.


The cost of fuel is equal to (155.27 miles / 37.5 miles per gallon) multiplied by 144 pence a litre, which is 27.1 pounds.

A more in-depth explanation of the result is as follows:

Fuel usage is miles multiplied by 4.54609 divided by the distance travelled by the vehicle.Consumption is 155.27 miles multiplied by 4.54609 divided by 37.5 miles per gallon, which equals 18.8 litres

It takes 18.8 litres of fuel.

The cost of fuel is equal to the amount of fuel required multiplied by the price per litre, which is 18.8 litres multiplied by 144 pence a litre, which is 27.1 pounds.

The cost of fuel from Melton to Reigate and Banstead is 27.1 pounds.
 

 

Yes, fuel quality affects car fuel usage. The primary reasons:

Engine cleanliness and efficiency may be maintained using high-quality petrololine and the right additives and detergents. Clean engines burn fuel more effectively, improving mileage and fuel economy.

Performance: Impurities or uneven blends in low-quality fuels can cause incomplete combustion or engine banging. Engine efficiency and fuel consumption may suffer.

Engine deposits: Low-quality fuels can deposit on fuel injectors, intake valves, and combustion chambers. Deposits can hinder fuel delivery and combustion, reducing efficiency and increasing consumption.

Carbon monoxide and hydrocarbon emissions may increase with low-quality fuels. Inefficient combustion from low-quality petrololine can increase emissions and engine performance and fuel consumption.

Continued use of low-quality fuel can damage engines and reduce fuel efficiency. Engine deposits can slow engine performance, increasing fuel consumption and repair costs.

Overall, utilizing high-quality fuel that matches manufacturer specifications can improve engine performance, emissions, and fuel consumption.

Diesel cost from Melton to Reigate and Banstead.

The trip with diesel fuel costs 18.8 £ (167p/lt, 62.7 mpg).
For 2 passengers: 9.4 £ (18.8/2) /p.
For 3 passengers: 6.27 £ (18.8/3) /p.
For 4 passengers: 4.7 £ (18.8/4) /p.

Alternative routes from Melton to Reigate and Banstead

The second route from Melton to the Reigate and Banstead is 162.74 miles and takes 2 hours and 50 minutes.

The third route from Melton to the Reigate and Banstead is 147.95 miles and takes 3 hours and 23 minutes.

Which is the cheapest route from Melton to Reigate and Banstead by car?

The cheapest route from Melton to Reigate and Banstead is the third suggested route (148mi, 3h 23min) and costs 25.8 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The second cheapest route from Melton to Reigate and Banstead is the first suggested route (155mi, 2h 41min) and costs 27.1 £.

The most expensive route from Melton to Reigate and Banstead is the second suggested route (163mi, 2h 50min) and costs 28.4 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Melton to Reigate and Banstead?

There are three suggested routes. The fastest route is 155mi (distance from Melton to Reigate and Banstead) and its duration is 2h 41min. The other route is 163mi, and its duration is 2h 50min. The slowest route is 148mi, and its duration is 3h 23min.

RouteCalculator provides you with the information to prepare your trip from Melton to Reigate and Banstead by car or motorbike. It offers you alternative road routes that you can follow to go from Melton to Reigate and Banstead. It provides driving directions from Melton to Reigate and Banstead, i.e. where to turn and when, distance of the Melton - Reigate and Banstead route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Melton to Reigate and Banstead with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Melton located?

Melton is located in Leicestershire county and in England. It is situated at an altitude of 133 meters above sea level. Melton has coordinates 52.8282784o,-0.8432685o. RouteCalculator provides a map of Melton from which you can plan your trips to other UK cities.

What is the location of Reigate and Banstead?

Reigate and Banstead is located in Surrey county and in England. It is situated at an altitude of 171 meters above sea level. Reigate and Banstead has coordinates 51.2839423o,-0.2098622o. RouteCalculator provides a map of Reigate and Banstead from which you can plan your trips to other UK cities.