Route from Merton to Waverley

The distance between Merton and Waverley is 29.8 miles. Travel time is 35 minutes.

From: Merton, County: Greater London, England
To: Waverley, County: Surrey, England
29.8 mi , 35 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Merton to Waverley on map



Driving directions from Merton to Waverley

29.8 mi 35 min
1.
Head southwest on Cleveland Avenue
176 ft
2.
Turn right onto Cannon Hill Lane
255 ft
3.
Turn left onto Kingston Road (A238)
1019 ft
4.
Go straight towards Morden
1.1 mi
5.
Continue onto Beverley Way (A298)
129 ft
6.
Take the ramp on the right onto A298
345 ft
7.
Merge right onto Beverley Way (A3)
1228 ft
8.
Continue onto Malden Way (A3)
1.4 mi
9.
Continue onto Tolworth Rise South (A3)
0.5 mi
10.
Continue onto Kingston Bypass (A3)
1.4 mi
11.
Continue onto Hook Underpass (A3)
0.3 mi
12.
Keep right onto A3
18.3 mi
13.
Keep right onto Guildford and Godalming Bypass (A3)
4 mi
14.
Continue onto Milford By-Pass (A3)
1.3 mi
15.
Continue onto Portsmouth Road (A3)
0.8 mi
16.
You have arrived at your destination, on the left
0 ft


How much does it cost to travel from Merton to Waverley by car?

Fuel for the journey in the form of petrol costs 5.2 pounds. The gasoline price is assumed to be 144 pence per litre in the calculation above, and the vehicle's fuel consumption is 37.5 miles per gallon.
The expense for two individuals participating in a carpool is £2.6 (equivalent to 5.2/2) per passenger.
The fare for this journey for three individuals in the vehicle is 1.73 pounds (5.2/3) per passenger.
1.3 pounds (5.2/4) per passenger is the expense of this journey for a car carrying four passengers.


(29.77 miles at 37.5 mpg) x 144 pence per litre for fuel equals 5.2 pounds.

To be more precise, the outcome is as follows:

Fuel Required = Distance / Vehicle Fuel Consumption (in miles multiplied by 4.54609 per vehicle)3.6 litres are consumed (29.77 miles * 4.54609 / 37.5 mpg).

Required fuel = 3.6 lt

Fuel expenses are calculated as follows: 3.6 litres x 144 pence per litre, or 5.2 pounds

5.2 pounds for fuel to get from Merton to Waverley
 

 

How much fuel a car uses is directly related to how well its engine is oiled. How to do it: 

 

  • Efficiency: An engine that has been properly cared for and is in good shape works more efficiently, which means it can burn fuel more efficiently and use less of it to make the same amount of power. 
     
  • Combustion: If the fuel injectors are dirty, the air filters are jammed, or the spark plugs don't work right, the fuel may not burn all the way. This is called incomplete combustion. This wastes fuel and makes people use more of it. 
     
  • Fuel blend: For the engine to burn efficiently, the fuel-air blend needs to be carefully managed. Any changes from the right ratio, like when an oxygen monitor or fuel injector doesn't work right, can cause the engine to use more fuel than it should. 
     
  • Mechanical Wear: As an engine ages, parts inside it like piston rings, valves, and seals can wear out. This makes the engine less efficient and causes it to use more petrol. This wear can be lessened with regular upkeep, which can also help keep fuel use in check. 
     
  • Ignition Timing: If the ignition timing is off, it can cause inefficient combustion and higher fuel usage. This can be caused by a worn distributor or a broken ignition system. 
     

To sum up, the state of a car's engine is a major factor in how much fuel it uses. For the engine to work well and use little petrol, it needs to be serviced regularly and fixed quickly when something goes wrong.

Diesel cost from Merton to Waverley.

The trip with diesel fuel costs 3.6 £ (167p/lt, 62.7 mpg).
For 2 passengers: 1.8 £ (3.6/2) /p.
For 3 passengers: 1.2 £ (3.6/3) /p.
For 4 passengers: 0.9 £ (3.6/4) /p.

Alternative routes from Merton to Waverley

An alternative route from Merton to the Waverley is 33.28 miles and takes 43 minutes.

Which is the cheapest route from Merton to Waverley by car?

The cheapest route from Merton to Waverley is the first suggested route (29.8mi, 35min) and costs 5.2 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The most expensive route from Merton to Waverley is the second suggested route (33.3mi, 43min) and costs 5.8 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Merton to Waverley?

There are two suggested routes. The fastest route is 29.8mi (distance from Merton to Waverley) and its duration is 35min. The slowest route is 33.3mi, and its duration is 43min.

RouteCalculator provides you with the information to prepare your trip from Merton to Waverley by car or motorbike. It offers you alternative road routes that you can follow to go from Merton to Waverley. It provides driving directions from Merton to Waverley, i.e. where to turn and when, distance of the Merton - Waverley route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Merton to Waverley with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Merton located?

Merton is located in Greater London county and in England. It is situated at an altitude of 15 meters above sea level. Merton has coordinates 51.4097735o,-0.2108092o. RouteCalculator provides a map of Merton from which you can plan your trips to other UK cities.

What is the location of Waverley?

Waverley is located in Surrey county and in England. It is situated at an altitude of 75 meters above sea level. Waverley has coordinates 51.1565891o,-0.6764452o. RouteCalculator provides a map of Waverley from which you can plan your trips to other UK cities.