Route from Middlesbrough to Thanet
The distance between Middlesbrough and Thanet is 314 miles. Travel time is 5 hours and 11 minutes.
Driving directions from Middlesbrough to Thanet
What's the expense of traveling from Middlesbrough to Thanet by car?
If you're using petrol, you're looking at an expense of 54.5 quid. Now, how do we get to that number? Let's break it down.
First off, we need to consider the price of petrol. In this calculation, it's set at 143 pence per liter. Then, we need to know how thirsty your car is. The fuel consumption rate for this ride is 37.5 miles per gallon.
Now, if you're carpooling, the cost gets divvied up. For two people sharing the ride, it's gonna be 27.25 quid each (£54.5 divided by 2). If you've got three folks in the car, the cost per person comes down to about 18.17 quid (£54.5 divided by 3). And if it's a full house with four passengers, each person chips in 13.63 quid (£54.5 divided by 4).
Let's dive into the nitty-gritty of the calculations. To figure out how much fuel you need for the trip, it's all about distance and fuel efficiency. The distance between Middlesbrough and Thanet is about 314.39 miles. So, to cover that distance, your car's gonna need approximately 38.1 liters of petrol. We got that number by dividing the distance by the car's fuel consumption rate of 37.5 miles per gallon and then converting it to liters 'cause that's what we use here.
Once we know how much fuel we need, we can calculate the total cost. Multiply the amount of fuel (38.1 liters) by the price per liter (143 pence), and you get 54.5 quid. So, there you have it, the fuel cost for your journey from Middlesbrough to Thanet: 54.5 pounds.
Diesel cost from Middlesbrough to Thanet.
The trip with diesel fuel costs 34.4 £ (151p/lt, 62.7 mpg).
For 2 passengers: 17.2 £ (34.4/2) /p.
For 3 passengers: 11.47 £ (34.4/3) /p.
For 4 passengers: 8.6 £ (34.4/4) /p.
Diesel engines vs petrol engines:
-
Spark Ignition (Petrol Engines): In petrol engines, the ignition process begins with the introduction of an air-fuel mixture into the combustion chamber. A spark plug then generates a high-voltage electrical spark, which ignites the compressed air-fuel mixture, initiating combustion. This method is known as spark ignition, as the spark plug plays a crucial role in igniting the mixture.
-
Compression Ignition (Diesel Engines): Diesel engines operate on a different principle known as compression ignition. In these engines, air is compressed within the combustion chamber to a high temperature and pressure by the upward movement of the piston. This compression causes the diesel fuel, injected into the combustion chamber, to ignite spontaneously without the need for a spark plug. The high pressure and temperature created during compression cause the diesel fuel to combust, driving the power stroke of the engine.
Alternative routes from Middlesbrough to Thanet
Meanwhile, the least speedy route from Middlesbrough to Thanet covers 329.49 miles and necessitates 5 hours and 25 minutes for completion.
Which is the cheapest route from Middlesbrough to Thanet by car?
The cheapest route from Middlesbrough to Thanet is the first suggested route (314mi, 5h 11min) and costs 54.5 £ (petrol fuel cost, 143p/lt, 37.5mpg).
The most expensive route from Middlesbrough to Thanet is the second suggested route (329mi, 5h 25min) and costs 57.1 £.
For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).
How to get from Middlesbrough to Thanet?
There are two suggested routes. The fastest route is 314mi (distance from Middlesbrough to Thanet) and its duration is 5h 11min. The slowest route is 329mi, and its duration is 5h 25min.
RouteCalculator provides you with the information to prepare your trip from Middlesbrough to Thanet by car or motorbike. It offers you alternative road routes that you can follow to go from Middlesbrough to Thanet. It provides driving directions from Middlesbrough to Thanet, i.e. where to turn and when, distance of the Middlesbrough - Thanet route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.
In case you share the journey (carpooling) from Middlesbrough to Thanet with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.
Where is Middlesbrough located?
Middlesbrough is located in North Yorkshire county and in England. It is situated at an altitude of 11 meters above sea level. Middlesbrough has coordinates 54.5742270o,-1.2349560o. RouteCalculator provides a map of Middlesbrough from which you can plan your trips to other UK cities.
What is the location of Thanet?
Thanet is located in Kent county and in England. It is situated at an altitude of 32 meters above sea level. Thanet has coordinates 51.3602516o,1.3484663o. RouteCalculator provides a map of Thanet from which you can plan your trips to other UK cities.
- Route from Middlesbrough to Three Rivers
- Distance from Middlesbrough to Thurrock
- Route from Middlesbrough to Tonbridge and Malling
- Distance from Middlesbrough to Torbay
- Miles from Middlesbrough to Torridge
- How far is from Middlesbrough to Tower Hamlets
- Route from Middlesbrough to Trafford
- Distance from Middlesbrough to Tunbridge Wells
- Distance from Middlesbrough to Uttlesford