Route from Mole Valley to Halton

The distance between Mole Valley and Halton is 219 miles. Travel time is 3 hours and 43 minutes.

From: Mole Valley, County: Surrey, England
To: Halton, County: Cheshire, England
219 mi , 3 h 43 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Mole Valley to Halton on map



Driving directions from Mole Valley to Halton

219 mi 3 h 43 min
1.
Head southwest on Claygate Road
650 ft
2.
Turn right onto Tollgate Road
560 ft
3.
Turn left onto Flint Hill (A2003)
0.3 mi
4.
Enter the roundabout and take the 1st exit onto A24
33 ft
5.
Exit the roundabout onto A24
1.7 mi
6.
Enter Deepdene Roundabout and take the 2nd exit onto Deepdene Avenue (A24)
115 ft
7.
Exit the roundabout onto Deepdene Avenue (A24)
927 ft
8.
Continue onto London Road (A24)
0.5 mi
9.
Enter Denbies Roundabout and take the 1st exit onto A24
145 ft
10.
Exit the roundabout onto A24
0.7 mi
11.
Enter Burford Bridge Roundabout and take the 1st exit onto Mickleham Bypass (A24)
57 ft
12.
Exit the roundabout onto Mickleham Bypass (A24)
2.4 mi
13.
Enter Givons Grove Roundabout and take the 3rd exit onto Leatherhead By-Pass (A24)
254 ft
14.
Exit the roundabout onto Leatherhead By-Pass (A24)
0.8 mi
15.
Enter Beaverbrook Roundabout and take the 2nd exit onto Leatherhead By-Pass (A24)
162 ft
16.
Exit the roundabout onto Leatherhead By-Pass (A24)
0.9 mi
17.
Enter the roundabout and take the 2nd exit onto Leatherhead By-Pass (A243)
118 ft
18.
Exit the roundabout onto Leatherhead By-Pass (A243)
0.4 mi
19.
Enter the roundabout and take the 3rd exit onto M25
446 ft
20.
Exit the roundabout onto M25
25.3 mi
21.
Take the ramp on the left towards M40 (W): Birmingham
28.4 mi
22.
Keep right onto M40
56.8 mi
23.
Take exit 3A on the left towards M42 North: Birmingham (E
11.1 mi
24.
Take the ramp on the left towards M6: M6(N)
0.9 mi
25.
Merge left onto M6
12.1 mi
26.
Keep right onto M6
7.9 mi
27.
Keep right onto M6
58.2 mi
28.
Take the ramp on the left
1221 ft
29.
Keep left towards M56
0.6 mi
30.
Merge right onto M56
5.4 mi
31.
Take the ramp on the left towards A56: Preston Brook
1228 ft
32.
Enter Preston Brook Interchange and take the 1st exit onto Chester Road (A56)
236 ft
33.
Exit the roundabout onto Chester Road (A56)
0.9 mi
34.
Enter the roundabout and take the 1st exit onto Chester Road (A56)
72 ft
35.
Exit the roundabout onto Chester Road (A56)
0.3 mi
36.
Enter the roundabout and take the 2nd exit onto Chester Road (A533)
62 ft
37.
Exit the roundabout onto Chester Road (A533)
0.4 mi
38.
Enter Southern Expressway Roundabout and take the 1st exit onto Southern Expressway (A533)
17 ft
39.
Exit the roundabout onto Southern Expressway (A533)
1 mi
40.
Take the ramp on the left
1108 ft
41.
Enter Hallwood Link Road Roundabout and take the 2nd exit onto Hallwood Link Road
509 ft
42.
Exit the roundabout onto Hallwood Link Road
0.4 mi
43.
Enter the roundabout and take the 2nd exit onto East Lane
110 ft
44.
Exit the roundabout onto East Lane
229 ft
45.
Enter Southway/East Lane Roundabout and take the 2nd exit onto East Lane
138 ft
46.
Exit the roundabout onto East Lane
1093 ft
47.
Enter the roundabout and take the 2nd exit onto Holt Lane
65 ft
48.
Exit the roundabout onto Holt Lane
642 ft
49.
Turn left onto Main Street
358 ft
50.
Turn right onto Castle Road
148 ft
51.
Make a slight left to stay on Castle Road
208 ft
52.
Turn left
118 ft
53.
You have arrived at your destination, on the right
0 ft


How much does it cost to drive from Mole Valley to Halton?

The trip with petrol fuel costs 38.3 £. In the above calculation, the petrol price is considered to be 144 pence per liter and the petrol consumption of the car is 37.5 miles per gallon.
For 2 passengers in carpooling, the cost of this trip is 19.15 £ (38.3/2) per passenger.
For 3 passengers in the car, the cost of this trip is 12.77 £ (38.3/3) per passenger.
For 4 passengers in the car, the cost of this trip are 9.58 £ (38.3/4) per passenger.


Fuel cost = (219.29 mi / 37.5 mpg) x 144 pence per liter = 38.3 £

In more detail, the result is obtained:

Fuel needed = Distance / Car fuel consumption = miles * 4.54609 / carConsumtion = 219.29 mi * 4.54609 / 37.5 mpg = 26.6 liters

Fuel needed = 26.6 lt

Fuel cost = Fuel needed x Price per liter = 26.6 liters x 144 pence per liter = 38.3 £

Fuel cost from Mole Valley to Halton = 38.3 £

 

Road conditions affect fuel usage for the following reasons:

Surface Roughness: Potholes, fissures, and uneven pavement increase rolling resistance. This makes the tires work harder to maintain speed, increasing fuel consumption.

Tire-road surface friction increases with poor road conditions. Friction causes drag, which makes the engine work harder. Therefore, fuel usage might rise, especially at high speeds.

Traffic Congestion: Heavy traffic causes stops and idling in traffic queues. Constant acceleration and deceleration might increase fuel consumption compared to open roadways.

Elevation Changes: Steep inclines or falls can effect fuel usage, especially for smaller engines. Uphill climbing takes more engine power and petrololine, whereas descending downhill may require more braking and fuel to regulate.

Rain, snow, and ice can impair road traction and vehicle stability. Adjusting speed and driving behavior can affect fuel consumption.

Good pavement and smooth roads use less fuel than rough or badly maintained roads. Smooth roads reduce rolling resistance and improve vehicle efficiency.

Road conditions greatly affect fuel use, so drivers' fuel economy may vary.

Diesel cost from Mole Valley to Halton.

The trip with diesel fuel costs 26.6 £ (167p/lt, 62.7 mpg).
For 2 passengers: 13.3 £ (26.6/2) /p.
For 3 passengers: 8.87 £ (26.6/3) /p.
For 4 passengers: 6.65 £ (26.6/4) /p.

Alternative routes from Mole Valley to Halton

The slowest route from Mole Valley to the Halton is 211.97 miles and takes 4 hours and 55 minutes.

Which is the cheapest route from Mole Valley to Halton by car?

The cheapest route from Mole Valley to Halton is the second suggested route (212mi, 4h 55min) and costs 37 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The most expensive route from Mole Valley to Halton is the first suggested route (219mi, 3h 43min) and costs 38.3 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Mole Valley to Halton?

There are two suggested routes. The fastest route is 219mi (distance from Mole Valley to Halton) and its duration is 3h 43min. The slowest route is 212mi, and its duration is 4h 55min.

RouteCalculator provides you with the information to prepare your trip from Mole Valley to Halton by car or motorbike. It offers you alternative road routes that you can follow to go from Mole Valley to Halton. It provides driving directions from Mole Valley to Halton, i.e. where to turn and when, distance of the Mole Valley - Halton route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Mole Valley to Halton with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Mole Valley located?

Mole Valley is located in Surrey county and in England. It is situated at an altitude of 107 meters above sea level. Mole Valley has coordinates 51.2208513o,-0.3261145o. RouteCalculator provides a map of Mole Valley from which you can plan your trips to other UK cities.

What is the location of Halton?

Halton is located in Cheshire county and in England. It is situated at an altitude of 92 meters above sea level. Halton has coordinates 53.3317210o,-2.6958220o. RouteCalculator provides a map of Halton from which you can plan your trips to other UK cities.