Route from Mole Valley to Port Talbot
The distance between Mole Valley and Port Talbot is 191 miles. Travel time is 3 hours and 25 minutes.
To: Port Talbot, County: Swansea, WalesDriving directions from Mole Valley to Port Talbot
How much does it cost to drive from Mole Valley to Port Talbot with petrol?
Driving from Mole Valley to Port Talbot costs £33.3 with petrol. The calculation assumes a petrol price of 144 pence per liter and a car's petrol consumption of 37.5 miles per gallon. Carpooling with two passengers brings the cost down to £16.65 per person. With three passengers, it's £11.1 per person, and with four passengers, it's £8.33 per person. The fuel cost for the trip is derived from the distance and car fuel consumption, totaling 23.1 liters of fuel. This results in a £33.3 fuel cost for the journey.
One thing that can affect fuel consumption is the condition of the road for the following reasons:
-
Surface Roughness: Rough road surfaces, such as those with potholes, cracks, or uneven pavement, can increase rolling resistance. This means the tires have to work harder to maintain speed, leading to higher fuel consumption.
-
Friction: Poor road conditions can also increase friction between the tires and the road surface. This friction creates drag, which requires the engine to work harder to overcome. As a result, fuel consumption can increase, especially at higher speeds.
-
Traffic Congestion: Roads with heavy traffic congestion often involve frequent stops and starts, as well as idling in traffic queues. This constant acceleration and deceleration can lead to increased fuel consumption compared to driving on open, free-flowing roads.
-
Elevation Changes: Roads with steep inclines or declines can affect fuel consumption, especially for vehicles with less powerful engines. Climbing uphill requires more power from the engine and thus more fuel, while descending downhill may require additional braking and fuel to maintain control.
-
Weather Conditions: Adverse weather conditions such as rain, snow, or ice can affect road traction and vehicle stability. Drivers may need to adjust their speed and driving behavior, which can impact fuel consumption.
-
Surface Quality: Smooth road surfaces with good pavement quality generally result in lower fuel consumption compared to rough or poorly maintained roads. This is because smooth roads reduce rolling resistance and allow for more efficient vehicle operation.
Overall, road conditions play a significant role in determining fuel consumption, and drivers may experience variations in fuel efficiency depending on the condition of the roads they are driving on.
Diesel cost from Mole Valley to Port Talbot.
The trip with diesel fuel costs 23.1 £ (167p/lt, 62.7 mpg).
For 2 passengers: 11.55 £ (23.1/2) /p.
For 3 passengers: 7.7 £ (23.1/3) /p.
For 4 passengers: 5.78 £ (23.1/4) /p.
Alternative routes from Mole Valley to Port Talbot
The most time-consuming route from Mole Valley to Port Talbot spans a distance of 206.36 miles and requires a travel time of 4 hours and 15 minutes.
Which is the cheapest route from Mole Valley to Port Talbot by car?
The cheapest route from Mole Valley to Port Talbot is the first suggested route (191mi, 3h 25min) and costs 33.3 £ (petrol fuel cost, 144p/lt, 37.5mpg).
The most expensive route from Mole Valley to Port Talbot is the second suggested route (206mi, 4h 15min) and costs 36 £.
For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).
How to get from Mole Valley to Port Talbot?
There are two suggested routes. The fastest route is 191mi (distance from Mole Valley to Port Talbot) and its duration is 3h 25min. The slowest route is 206mi, and its duration is 4h 15min.
RouteCalculator provides you with the information to prepare your trip from Mole Valley to Port Talbot by car or motorbike. It offers you alternative road routes that you can follow to go from Mole Valley to Port Talbot. It provides driving directions from Mole Valley to Port Talbot, i.e. where to turn and when, distance of the Mole Valley - Port Talbot route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.
In case you share the journey (carpooling) from Mole Valley to Port Talbot with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.
Where is Mole Valley located?
Mole Valley is located in Surrey county and in England. It is situated at an altitude of 107 meters above sea level. Mole Valley has coordinates 51.2208513o,-0.3261145o. RouteCalculator provides a map of Mole Valley from which you can plan your trips to other UK cities.
What is the location of Port Talbot?
Port Talbot is located in Swansea county and in Wales. It is situated at an altitude of 14 meters above sea level. Port Talbot has coordinates 51.6214400o,-3.9436460o. RouteCalculator provides a map of Port Talbot from which you can plan your trips to other UK cities.
- Route from Mole Valley to Portsmouth
- Distance from Mole Valley to Preston
- Route from Mole Valley to Purbeck
- Distance from Mole Valley to Reading
- Miles from Mole Valley to Redbridge
- How far is from Mole Valley to Redcar and Cleveland
- Route from Mole Valley to Redditch
- Distance from Mole Valley to Reigate and Banstead
- Distance from Mole Valley to Renfrew
