Route from Perth to Bolton

The distance between Perth and Bolton is 252 miles. Travel time is 4 hours and 15 minutes.

From: Perth, County: Perth and Kinross, Scotland
To: Bolton, County: Greater Manchester, England
252 mi , 4 h 15 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Perth to Bolton on map



Driving directions from Perth to Bolton

252 mi 4 h 15 min
1.
Head east on South Street
824 ft
2.
Turn right onto Speygate
304 ft
3.
Turn right onto Canal Street
0.3 mi
4.
Turn right onto King Street
356 ft
5.
Turn left onto County Place
363 ft
6.
Continue onto York Place (A93)
1052 ft
7.
Continue onto Glasgow Road (A93)
815 ft
8.
Enter the roundabout and take the 1st exit onto Glover Street
8 ft
9.
Exit the roundabout onto Glover Street
328 ft
10.
Turn right onto Graybank Road
982 ft
11.
Turn right onto Pickletullum Road
324 ft
12.
Turn left onto Glasgow Road (A93)
1.4 mi
13.
Enter the roundabout and take the 2nd exit onto A93
122 ft
14.
Exit the roundabout onto A93
974 ft
15.
Enter Broxden Roundabout and take the 2nd exit towards A9: Stirling
420 ft
16.
Exit the roundabout towards A9: Stirling
26.2 mi
17.
Enter Keir Roundabout and take the 3rd exit onto M9
630 ft
18.
Exit the roundabout onto M9
6.4 mi
19.
Keep right towards M80: Carlisle
13.6 mi
20.
Keep left onto M73
6.4 mi
21.
Keep left towards M74: Carlisle
0.5 mi
22.
Keep right towards M74: Carlisle
29.5 mi
23.
Continue onto A74(M)
49 mi
24.
Continue onto M6
98 mi
25.
Keep left onto M61
15 mi
26.
Take the ramp on the left onto M61
0.3 mi
27.
Enter Hunger Hill Interchange and take the 1st exit onto Snydale Way (A58)
23 ft
28.
Exit the roundabout onto Snydale Way (A58)
895 ft
29.
Continue onto Wigan Road (A58)
1.7 mi
30.
Continue onto Deane Road (A676)
0.7 mi
31.
Turn right onto Moor Lane (A676)
390 ft
32.
Turn left onto Trinity Street (A579)
0.4 mi
33.
Turn left onto Bradshawgate (A575)
845 ft
34.
Turn left onto Great Moor Street (B6204)
600 ft
35.
Turn right onto Back Cheapside
114 ft
36.
Turn right onto Bold Street
102 ft
37.
Turn left onto Back Mawdsley Street
14 ft
38.
You have arrived at your destination
0 ft


If you were to travel from Perth to Bolton, how much would it charge you?

A trip with petrol gasoline will cost you 43.7 pounds. According to the figure presented above, the price of petrol corresponds to 143 pence per litre, and the amount of petrol that the vehicle consumes is equivalent to 37.5 miles per gallon.
Through carpooling, the cost of this trip is 21.85 pounds for each of the two passengers.
When there are three people in the automobile, the cost of this trip is 14.57 pounds (43.7/3) for each individual passenger.
This trip will cost you 10.93 pounds for each of the four people who are travelling in the automobile.


The cost of fuel is equal to (251.96 miles / 37.5 miles per gallon) multiplied by 143 pence a litre, which is 43.7 pounds.

A more in-depth explanation of the result is as follows:

Fuel usage is miles multiplied by 4.54609 divided by the distance travelled by the vehicle.Consumption is 251.96 miles multiplied by 4.54609 divided by 37.5 miles per gallon, which equals 30.5 litres

It takes 30.5 litres of fuel.

The cost of fuel is equal to the amount of fuel required multiplied by the price per litre, which is 30.5 litres multiplied by 143 pence a litre, which is 43.7 pounds.

The cost of fuel from Perth to Bolton is 43.7 pounds.
 

Diesel cost from Perth to Bolton.

The trip with diesel fuel costs 27.6 £ (151p/lt, 62.7 mpg).
For 2 passengers: 13.8 £ (27.6/2) /p.
For 3 passengers: 9.2 £ (27.6/3) /p.
For 4 passengers: 6.9 £ (27.6/4) /p.

Diesel cars generally have lower fuel consumption compared to petrol cars for the following reasons:

  1. Higher Energy Density of Diesel Fuel: Diesel fuel contains more energy per liter compared to petrol. This means that for the same volume of fuel, diesel engines can generate more power and travel a greater distance, resulting in lower fuel consumption.

  2. Increased Thermal Efficiency of Diesel Engines: Diesel engines operate at higher compression ratios compared to petrol engines. This higher compression ratio allows diesel engines to extract more energy from each unit of fuel. As a result, diesel engines are typically more thermally efficient, translating into lower fuel consumption.

  3. Greater Torque at Lower RPM: Diesel engines tend to produce more torque at lower engine speeds (RPM) compared to petrol engines. This characteristic allows diesel vehicles to maintain better fuel efficiency, particularly during steady-state cruising, as they require less throttle input to maintain speed.

These factors combined contribute to the generally lower fuel consumption observed in diesel cars compared to their petrol counterparts.

Alternative routes from Perth to Bolton

An alternative route from Perth to the Bolton is 252.76 miles and takes 4 hours and 42 minutes.

Which is the cheapest route from Perth to Bolton by car?

The cheapest route from Perth to Bolton is the first suggested route (252mi, 4h 15min) and costs 43.7 £ (petrol fuel cost, 143p/lt, 37.5mpg).

The most expensive route from Perth to Bolton is the second suggested route (253mi, 4h 42min) and costs 43.8 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Perth to Bolton?

There are two suggested routes. The fastest route is 252mi (distance from Perth to Bolton) and its duration is 4h 15min. The slowest route is 253mi, and its duration is 4h 42min.

RouteCalculator provides you with the information to prepare your trip from Perth to Bolton by car or motorbike. It offers you alternative road routes that you can follow to go from Perth to Bolton. It provides driving directions from Perth to Bolton, i.e. where to turn and when, distance of the Perth - Bolton route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Perth to Bolton with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Perth located?

Perth is located in Perth and Kinross county and in Scotland. It is situated at an altitude of 10 meters above sea level. Perth has coordinates 56.3949940o,-3.4308381o. RouteCalculator provides a map of Perth from which you can plan your trips to other UK cities.

What is the location of Bolton?

Bolton is located in Greater Manchester county and in England. It is situated at an altitude of 100 meters above sea level. Bolton has coordinates 53.5768647o,-2.4282192o. RouteCalculator provides a map of Bolton from which you can plan your trips to other UK cities.