Route from Perth to Richmond upon Thames

The distance between Perth and Richmond upon Thames is 453 miles. Travel time is 7 hours and 38 minutes.

From: Perth, County: Perth and Kinross, Scotland
To: Richmond upon Thames, County: Greater London, England
453 mi , 7 h 38 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Perth to Richmond upon Thames on map



Driving directions from Perth to Richmond upon Thames

453 mi 7 h 38 min
1.
Head east on South Street
824 ft
2.
Turn right onto Speygate
304 ft
3.
Turn right onto Canal Street
0.3 mi
4.
Turn right onto King Street
356 ft
5.
Turn left onto County Place
363 ft
6.
Continue onto York Place (A93)
1052 ft
7.
Continue onto Glasgow Road (A93)
815 ft
8.
Enter the roundabout and take the 1st exit onto Glover Street
8 ft
9.
Exit the roundabout onto Glover Street
328 ft
10.
Turn right onto Graybank Road
982 ft
11.
Turn right onto Pickletullum Road
324 ft
12.
Turn left onto Glasgow Road (A93)
1.4 mi
13.
Enter the roundabout and take the 2nd exit onto A93
122 ft
14.
Exit the roundabout onto A93
974 ft
15.
Enter Broxden Roundabout and take the 2nd exit towards A9: Stirling
420 ft
16.
Exit the roundabout towards A9: Stirling
26.2 mi
17.
Enter Keir Roundabout and take the 3rd exit onto M9
630 ft
18.
Exit the roundabout onto M9
6.4 mi
19.
Keep right towards M80: Carlisle
13.6 mi
20.
Keep left onto M73
6.4 mi
21.
Keep left towards M74: Carlisle
0.5 mi
22.
Keep right towards M74: Carlisle
29.5 mi
23.
Continue onto A74(M)
49 mi
24.
Continue onto M6
98 mi
25.
Keep right onto Preston Bypass (M6)
86 mi
26.
Keep left onto M6
9.4 mi
27.
Keep right onto M6
37.9 mi
28.
Take the ramp on the left towards M1: The SOUTH
1.6 mi
29.
Merge right onto M1
75 mi
30.
Enter Staples Corner and take the 4th exit
1281 ft
31.
Exit the roundabout
524 ft
32.
Enter Staples Corner West Roundabout and take the 2nd exit onto North Circular Road (A406)
232 ft
33.
Exit the roundabout onto North Circular Road (A406)
0.3 mi
34.
Merge right onto North Circular Road (A406)
3.8 mi
35.
Enter Hanger Lane Gyratory and take the 2nd exit towards A406: North Circular
416 ft
36.
Exit the roundabout towards A406: North Circular
2.8 mi
37.
Enter Chiswick Roundabout and take the 4th exit onto Chiswick High Road (A205)
615 ft
38.
Exit the roundabout onto Chiswick High Road (A205)
858 ft
39.
Continue onto Kew Bridge Road (A205)
651 ft
40.
Continue slightly left onto Kew Road (A205)
0.4 mi
41.
Make a slight right to stay on Kew Road (A307)
1.4 mi
42.
Continue onto Richmond Circus (A316)
448 ft
43.
Keep left onto Twickenham Road (A316)
340 ft
44.
Turn left onto Parkshot
719 ft
45.
Continue onto Little Green
533 ft
46.
Turn left onto Duke Street
260 ft
47.
You have arrived at your destination, on the right
0 ft


How much does it cost to drive from Perth to Richmond upon Thames?

The trip with petrol fuel costs 78.5 £. In the above calculation, the petrol price is considered to be 143 pence per liter and the petrol consumption of the car is 37.5 miles per gallon.
For 2 passengers in carpooling, the cost of this trip is 39.25 £ (78.5/2) per passenger.
For 3 passengers in the car, the cost of this trip is 26.17 £ (78.5/3) per passenger.
For 4 passengers in the car, the cost of this trip are 19.63 £ (78.5/4) per passenger.


Fuel cost = (452.98 mi / 37.5 mpg) x 143 pence per liter = 78.5 £

In more detail, the result is obtained:

Fuel needed = Distance / Car fuel consumption = miles * 4.54609 / carConsumtion = 452.98 mi * 4.54609 / 37.5 mpg = 54.9 liters

Fuel needed = 54.9 lt

Fuel cost = Fuel needed x Price per liter = 54.9 liters x 143 pence per liter = 78.5 £

Fuel cost from Perth to Richmond upon Thames = 78.5 £

Diesel cost from Perth to Richmond upon Thames.

The trip with diesel fuel costs 49.6 £ (151p/lt, 62.7 mpg).
For 2 passengers: 24.8 £ (49.6/2) /p.
For 3 passengers: 16.53 £ (49.6/3) /p.
For 4 passengers: 12.4 £ (49.6/4) /p.

Diesel fuel and petrol fuel in terms of greater torque at lower RPM:

  • Diesel Fuel: Diesel engines typically produce more torque at lower engine speeds (RPM) compared to petrol engines. This characteristic is due to the inherent design differences between diesel and petrol engines, particularly in their combustion processes and fuel properties. Diesel engines operate on compression ignition, where the air-fuel mixture ignites spontaneously under high pressure and temperature, allowing them to generate high torque even at low RPMs. This characteristic makes diesel vehicles well-suited for tasks requiring high pulling power, such as towing or hauling heavy loads, as they can deliver ample torque at low engine speeds.

  • Petrol (Gasoline): Petrol engines generally produce less torque at lower RPMs compared to diesel engines. While petrol engines can also deliver torque, they often require higher engine speeds to reach their maximum torque output. Petrol engines rely on spark ignition, where the air-fuel mixture is ignited by a spark plug, and this combustion process may not generate as much torque at lower engine speeds as compression ignition in diesel engines. However, advancements in petrol engine technology, such as turbocharging and variable valve timing, have improved torque delivery across a broader RPM range in modern petrol vehicles.

Alternative routes from Perth to Richmond upon Thames

The slowest route from Perth to the Richmond upon Thames is 429.13 miles and takes 7 hours and 49 minutes.

Which is the cheapest route from Perth to Richmond upon Thames by car?

The cheapest route from Perth to Richmond upon Thames is the second suggested route (429mi, 7h 49min) and costs 74.4 £ (petrol fuel cost, 143p/lt, 37.5mpg).

The most expensive route from Perth to Richmond upon Thames is the first suggested route (453mi, 7h 38min) and costs 78.5 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Perth to Richmond upon Thames?

There are two suggested routes. The fastest route is 453mi (distance from Perth to Richmond upon Thames) and its duration is 7h 38min. The slowest route is 429mi, and its duration is 7h 49min.

RouteCalculator provides you with the information to prepare your trip from Perth to Richmond upon Thames by car or motorbike. It offers you alternative road routes that you can follow to go from Perth to Richmond upon Thames. It provides driving directions from Perth to Richmond upon Thames, i.e. where to turn and when, distance of the Perth - Richmond upon Thames route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Perth to Richmond upon Thames with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Perth located?

Perth is located in Perth and Kinross county and in Scotland. It is situated at an altitude of 10 meters above sea level. Perth has coordinates 56.3949940o,-3.4308381o. RouteCalculator provides a map of Perth from which you can plan your trips to other UK cities.

What is the location of Richmond upon Thames?

Richmond upon Thames is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Richmond upon Thames has coordinates 51.4613110o,-0.3037420o. RouteCalculator provides a map of Richmond upon Thames from which you can plan your trips to other UK cities.