Route from Perth to Tonbridge and Malling
The distance between Perth and Tonbridge and Malling is 449 miles. Travel time is 7 hours and 59 minutes.
To: Tonbridge and Malling, County: Kent, EnglandDriving directions from Perth to Tonbridge and Malling
How much does it cost to drive from Perth to Tonbridge and Malling with petrol?
Let's delve into the expenses of a road trip from Perth to Tonbridge and Malling. The journey using petrol will set you back 77.9 pounds. Now, let's walk through how we arrived at this figure.
Firstly, we consider the price of petrol, which is 143 pence per liter. Next, we take into account the car's fuel consumption rate, which stands at 37.5 miles per gallon.
Now, suppose you're carpooling. If there are two passengers sharing the ride, each person will contribute 38.95 pounds (£77.9 divided by 2). With three passengers, the cost per person drops to around 25.97 pounds (£77.9 divided by 3). And if there are four passengers onboard, each person chips in 19.48 pounds (£77.9 divided by 4).
Let's delve deeper into the calculations. To determine how much fuel is needed for the trip, we rely on the distance and the car's fuel efficiency. The distance between Perth and Tonbridge and Malling is approximately 449.25 miles. So, to cover this distance, the car will require roughly 54.5 liters of petrol. We obtained this value by dividing the distance by the car's fuel consumption rate of 37.5 miles per gallon and then converting it to liters.
Once we have the amount of fuel needed, we calculate the total cost. Multiplying the fuel quantity (54.5 liters) by the price per liter (143 pence) yields 77.9 pounds. Therefore, the fuel cost for the journey from Perth to Tonbridge and Malling is 77.9 pounds.
Diesel cost from Perth to Tonbridge and Malling.
The trip with diesel fuel costs 49.2 £ (151p/lt, 62.7 mpg).
For 2 passengers: 24.6 £ (49.2/2) /p.
For 3 passengers: 16.4 £ (49.2/3) /p.
For 4 passengers: 12.3 £ (49.2/4) /p.
Generally, diesel engines typically consume less fuel than petrol engines when all other factors are held constant. This is mainly because diesel fuel has a higher energy density and diesel engines are more thermally efficient. Diesel contains more energy per liter than petrol, and diesel engines are usually better at converting this energy into mechanical power. Moreover, diesel engines operate at higher compression ratios, enhancing their thermal efficiency and enabling them to extract more energy from each unit of fuel. Consequently, diesel vehicles often deliver superior fuel economy and can cover longer distances per gallon or liter of fuel compared to petrol vehicles of similar specifications.
Alternative routes from Perth to Tonbridge and Malling
The most time-consuming route from Perth to Tonbridge and Malling spans a distance of 488.2 miles and requires a travel time of 8 hours and 3 minutes.
Which is the cheapest route from Perth to Tonbridge and Malling by car?
The cheapest route from Perth to Tonbridge and Malling is the first suggested route (449mi, 7h 59min) and costs 77.9 £ (petrol fuel cost, 143p/lt, 37.5mpg).
The most expensive route from Perth to Tonbridge and Malling is the second suggested route (488mi, 8h 3min) and costs 84.6 £.
For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).
How to get from Perth to Tonbridge and Malling?
There are two suggested routes. The fastest route is 449mi (distance from Perth to Tonbridge and Malling) and its duration is 7h 59min. The slowest route is 488mi, and its duration is 8h 3min.
RouteCalculator provides you with the information to prepare your trip from Perth to Tonbridge and Malling by car or motorbike. It offers you alternative road routes that you can follow to go from Perth to Tonbridge and Malling. It provides driving directions from Perth to Tonbridge and Malling, i.e. where to turn and when, distance of the Perth - Tonbridge and Malling route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.
In case you share the journey (carpooling) from Perth to Tonbridge and Malling with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.
Where is Perth located?
Perth is located in Perth and Kinross county and in Scotland. It is situated at an altitude of 10 meters above sea level. Perth has coordinates 56.3949940o,-3.4308381o. RouteCalculator provides a map of Perth from which you can plan your trips to other UK cities.
What is the location of Tonbridge and Malling?
Tonbridge and Malling is located in Kent county and in England. It is situated at an altitude of 114 meters above sea level. Tonbridge and Malling has coordinates 51.2836073o,0.3502788o. RouteCalculator provides a map of Tonbridge and Malling from which you can plan your trips to other UK cities.
- Route from Perth to Torbay
- Distance from Perth to Torridge
- Route from Perth to Tower Hamlets
- Distance from Perth to Trafford
- Miles from Perth to Tunbridge Wells
- How far is from Perth to Uttlesford
- Route from Perth to Vale of White Horse
- Distance from Perth to Wakefield
- Distance from Perth to Walsall
