Route from Reading to Cannock Chase

The distance between Reading and Cannock Chase is 117 miles. Travel time is 2 hours and 12 minutes.

From: Reading, County: Berkshire, England
To: Cannock Chase, County: Staffordshire, England
117 mi , 2 h 12 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Reading to Cannock Chase on map



Driving directions from Reading to Cannock Chase

117 mi 2 h 12 min
1.
Head west
88 ft
2.
Turn left onto Inner Distribution Road
704 ft
3.
Enter Castle Hill Roundabout and take the 4th exit
547 ft
4.
Exit the roundabout
512 ft
5.
Go straight onto Inner Distribution Road (A329)
0.3 mi
6.
Continue onto Caversham Road (A329)
1298 ft
7.
Enter the roundabout and take the 1st exit onto Caversham Road (A4155)
27 ft
8.
Exit the roundabout onto Caversham Road (A4155)
1248 ft
9.
Enter the roundabout and take the 2nd exit onto Bridge Street (A4155)
139 ft
10.
Exit the roundabout onto Bridge Street (A4155)
782 ft
11.
Turn left onto Church Road (A4074)
1289 ft
12.
Continue onto St. Peter's Hill (A4074)
1189 ft
13.
Continue onto Woodcote Road (A4074)
0.6 mi
14.
Continue onto Upper Woodcote Road (A4074)
0.6 mi
15.
Continue onto Woodcote Road (A4074)
1.1 mi
16.
Continue onto Reading Road (A4074)
8 mi
17.
Enter the roundabout and take the 2nd exit onto Port Way (A4074)
86 ft
18.
Exit the roundabout onto Port Way (A4074)
0.7 mi
19.
Enter the roundabout and take the 2nd exit onto A4074
95 ft
20.
Exit the roundabout onto A4074
2 mi
21.
Enter the roundabout and take the 1st exit onto Henley Road (A4074)
97 ft
22.
Exit the roundabout onto Henley Road (A4074)
0.9 mi
23.
Continue straight onto Henley Road (A4074)
2.7 mi
24.
Enter the roundabout and take the 2nd exit onto A4074
163 ft
25.
Exit the roundabout onto A4074
1.3 mi
26.
Enter Golden Balls Roundabout and take the 2nd exit onto A4074
99 ft
27.
Exit the roundabout onto A4074
3.7 mi
28.
Enter Heyford Hill Roundabout and take the 1st exit onto Southern By-pass Road (A423)
56 ft
29.
Exit the roundabout onto Southern By-pass Road (A423)
342 ft
30.
Merge right onto Southern By-pass Road (A423)
0.6 mi
31.
Take the ramp on the left onto Southern By-pass Road (A423)
479 ft
32.
Merge right onto Southern By-pass Road (A423)
0.4 mi
33.
Merge right onto Hinksey Hill Interchange
850 ft
34.
Take the ramp on the left
0.3 mi
35.
Merge right onto Southern By-pass Road (A34)
11.7 mi
36.
Enter Wendlebury Interchange and take the 1st exit towards M40: Northampton
109 ft
37.
Exit the roundabout towards M40: Northampton
44.4 mi
38.
Take exit 3A on the left towards M42 North: Birmingham (E
15.2 mi
39.
Keep right onto M6 Toll
13.9 mi
40.
Take the ramp on the left
0.9 mi
41.
Enter the roundabout and take the 2nd exit onto Burntwood Way (A5195)
253 ft
42.
Exit the roundabout onto Burntwood Way (A5195)
1 mi
43.
Enter the roundabout and take the 1st exit onto A5190
97 ft
44.
Exit the roundabout onto A5190
0.7 mi
45.
Enter the roundabout and take the 3rd exit onto Cannock Road
254 ft
46.
Exit the roundabout onto Cannock Road
448 ft
47.
Enter the roundabout and take the 1st exit onto Stables Way
24 ft
48.
Exit the roundabout onto Stables Way
0.5 mi
49.
Enter the roundabout and take the 1st exit
89 ft
50.
Exit the roundabout
0.5 mi
51.
Continue onto Sevens Road
0.6 mi
52.
Continue onto Cannock Wood Road
0.5 mi
53.
Turn left onto Littleworth Road
0.3 mi
54.
Turn right onto Rawnsley Road
0.9 mi
55.
Turn right
234 ft
56.
You have arrived at your destination, straight ahead
0 ft


How much does it cost to drive from Reading to Cannock Chase?

Well, using petrol, it's £20.4. The petrol price we're talking about here is 144 pence per liter, and the car guzzles up 37.5 miles per gallon. Now, if you're carpooling with two buddies, each of you only chips in £10.2 for the trip (£20.4 divided by 2). With three mates, it's about £6.8 each (£20.4 divided by 3), and if you've got a full car of four, it's only £5.1 each (£20.4 divided by 4). The fuel cost for the journey is calculated based on how far you're driving and how much fuel your car drinks up. So, for this journey, you'd need about 14.1 liters of fuel. And that's where the £20.4 comes from for the trip from Reading to Cannock Chase.

Diesel cost from Reading to Cannock Chase.

The trip with diesel fuel costs 14.1 £ (167p/lt, 62.7 mpg).
For 2 passengers: 7.05 £ (14.1/2) /p.
For 3 passengers: 4.7 £ (14.1/3) /p.
For 4 passengers: 3.53 £ (14.1/4) /p.

Significant factors contributing to diesel cars generally having lower fuel consumption than petrol cars are:

  1. Higher Thermal Efficiency: Diesel engines typically operate at higher compression ratios than petrol engines. This higher compression ratio allows diesel engines to extract more energy from each unit of fuel, resulting in greater thermal efficiency. As a result, diesel vehicles can achieve better fuel economy compared to petrol vehicles.

  2. More Torque at Lower RPM: Diesel engines tend to produce more torque at lower engine speeds (RPM) compared to petrol engines. This characteristic enables diesel vehicles to perform more efficiently during steady-state driving conditions, requiring less throttle input to maintain speed. Consequently, diesel cars often exhibit lower fuel consumption, especially in highway driving scenarios.

Alternative routes from Reading to Cannock Chase

The second route from Reading to the Cannock Chase is 121.56 miles and takes 2 hours and 24 minutes.

The third route from Reading to the Cannock Chase is 124.43 miles and takes 2 hours and 35 minutes.

Which is the cheapest route from Reading to Cannock Chase by car?

The cheapest route from Reading to Cannock Chase is the first suggested route (117mi, 2h 12min) and costs 20.4 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The second cheapest route from Reading to Cannock Chase is the second suggested route (122mi, 2h 24min) and costs 21.2 £.

The most expensive route from Reading to Cannock Chase is the third suggested route (124mi, 2h 35min) and costs 21.7 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Reading to Cannock Chase?

There are three suggested routes. The fastest route is 117mi (distance from Reading to Cannock Chase) and its duration is 2h 12min. The other route is 122mi, and its duration is 2h 24min. The slowest route is 124mi, and its duration is 2h 35min.

RouteCalculator provides you with the information to prepare your trip from Reading to Cannock Chase by car or motorbike. It offers you alternative road routes that you can follow to go from Reading to Cannock Chase. It provides driving directions from Reading to Cannock Chase, i.e. where to turn and when, distance of the Reading - Cannock Chase route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Reading to Cannock Chase with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Reading located?

Reading is located in Berkshire county and in England. It is situated at an altitude of 43 meters above sea level. Reading has coordinates 51.4542645o,-0.9781303o. RouteCalculator provides a map of Reading from which you can plan your trips to other UK cities.

What is the location of Cannock Chase?

Cannock Chase is located in Staffordshire county and in England. It is situated at an altitude of 175 meters above sea level. Cannock Chase has coordinates 52.7183027o,-1.9858812o. RouteCalculator provides a map of Cannock Chase from which you can plan your trips to other UK cities.