Route from Reading to Ribble Valley
The distance between Reading and Ribble Valley is 227 miles. Travel time is 4 hours and 7 minutes.
To: Ribble Valley, County: Lancashire, EnglandDriving directions from Reading to Ribble Valley
How much is the expense of driving from Reading to Ribble Valley?
The expense of driving from Reading to Ribble Valley using petrol amounts to £39.6. This computation is based on a petrol price of 144 pence per liter and a car's fuel efficiency of 37.5 miles per gallon. For those considering carpooling arrangements, the cost per passenger decreases with more occupants. With two passengers, the cost per person is £19.8 (£39.6 divided by 2). With three passengers, it's approximately £13.2 per person (£39.6 divided by 3), and with four passengers, it's £9.9 per person (£39.6 divided by 4).
To delve deeper into the calculations, we can explore the fuel cost calculation. This is determined by the distance traveled and the car's fuel consumption rate. For this journey, approximately 27.5 liters of fuel would be required. Multiplying this by the petrol price per liter results in the total fuel cost of £39.6 for the trip from Reading to Ribble Valley.
Diesel cost from Reading to Ribble Valley.
The trip with diesel fuel costs 27.4 £ (167p/lt, 62.7 mpg).
For 2 passengers: 13.7 £ (27.4/2) /p.
For 3 passengers: 9.13 £ (27.4/3) /p.
For 4 passengers: 6.85 £ (27.4/4) /p.
Diesel cars generally have lower fuel consumption compared to petrol cars for the following reasons:
-
Higher Energy Density of Diesel Fuel: Diesel fuel contains more energy per liter compared to petrol. This means that for the same volume of fuel, diesel engines can generate more power and travel a greater distance, resulting in lower fuel consumption.
-
Increased Thermal Efficiency of Diesel Engines: Diesel engines operate at higher compression ratios compared to petrol engines. This higher compression ratio allows diesel engines to extract more energy from each unit of fuel. As a result, diesel engines are typically more thermally efficient, translating into lower fuel consumption.
-
Greater Torque at Lower RPM: Diesel engines tend to produce more torque at lower engine speeds (RPM) compared to petrol engines. This characteristic allows diesel vehicles to maintain better fuel efficiency, particularly during steady-state cruising, as they require less throttle input to maintain speed.
These factors combined contribute to the generally lower fuel consumption observed in diesel cars compared to their petrol counterparts.
Alternative routes from Reading to Ribble Valley
The second route from Reading to the Ribble Valley is 242.31 miles and takes 4 hours and 16 minutes.
The third route from Reading to the Ribble Valley is 226.64 miles and takes 5 hours and 16 minutes.
Which is the cheapest route from Reading to Ribble Valley by car?
The cheapest route from Reading to Ribble Valley is the suggested route (0ft, ) and costs £ (petrol fuel cost, 144p/lt, 37.5mpg).
The second cheapest route from Reading to Ribble Valley is the suggested route (0ft, ) and costs £.
The most expensive route from Reading to Ribble Valley is the suggested route (0ft, ) and costs £.
For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).
How to get from Reading to Ribble Valley?
There are three suggested routes. The fastest route is 227mi (distance from Reading to Ribble Valley) and its duration is 4h 7min. The other route is 242mi, and its duration is 4h 16min. The slowest route is 227mi, and its duration is 5h 16min.
RouteCalculator provides you with the information to prepare your trip from Reading to Ribble Valley by car or motorbike. It offers you alternative road routes that you can follow to go from Reading to Ribble Valley. It provides driving directions from Reading to Ribble Valley, i.e. where to turn and when, distance of the Reading - Ribble Valley route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.
In case you share the journey (carpooling) from Reading to Ribble Valley with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.
Where is Reading located?
Reading is located in Berkshire county and in England. It is situated at an altitude of 43 meters above sea level. Reading has coordinates 51.4542645o,-0.9781303o. RouteCalculator provides a map of Reading from which you can plan your trips to other UK cities.
What is the location of Ribble Valley?
Ribble Valley is located in Lancashire county and in England. It is situated at an altitude of 218 meters above sea level. Ribble Valley has coordinates 53.9289626o,-2.4627718o. RouteCalculator provides a map of Ribble Valley from which you can plan your trips to other UK cities.
- Route from Reading to Richmond upon Thames
- Distance from Reading to Richmondshire
- Route from Reading to Rochdale
- Distance from Reading to Rochford
- Miles from Reading to Rossendale
- How far is from Reading to Rother
- Route from Reading to Rotherham
- Distance from Reading to Rugby
- Distance from Reading to Runnymede
