Route from Richmond upon Thames to Corby

The distance between Richmond upon Thames and Corby is 93 miles. Travel time is 1 hour and 49 minutes.

From: Richmond upon Thames, County: Greater London, England
To: Corby, County: Northamptonshire, England
93 mi , 1 h 49 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Richmond upon Thames to Corby on map



Driving directions from Richmond upon Thames to Corby

93 mi 1 h 49 min
1.
Head southeast on Duke Street
37 ft
2.
Turn left onto The Quadrant (A307)
737 ft
3.
Continue onto Kew Road (A307)
598 ft
4.
Turn left onto A307
109 ft
5.
Merge right onto Richmond Circus (A316)
7 ft
6.
Keep right onto Richmond Circus (A316)
177 ft
7.
Make a slight left onto Kew Road (A307)
1.8 mi
8.
Turn right onto Kew Bridge Road (A205)
707 ft
9.
Continue onto Chiswick High Road (A205)
719 ft
10.
Enter Chiswick Roundabout and take the 2nd exit onto Gunnersbury Avenue (A406)
188 ft
11.
Exit the roundabout onto Gunnersbury Avenue (A406)
213 ft
12.
Keep right onto Gunnersbury Avenue (A406)
2.7 mi
13.
Enter Hanger Lane Gyratory and take the 3rd exit towards A406(N)
1112 ft
14.
Exit the roundabout towards A406(N)
3.8 mi
15.
Take the ramp on the left onto North Circular Road (A406)
0.3 mi
16.
Enter Staples Corner West Roundabout and take the 2nd exit
223 ft
17.
Exit the roundabout
315 ft
18.
Take exit 1 on the left towards M1: The NORTH
0.3 mi
19.
Merge right onto M1
54.8 mi
20.
Take the ramp on the left
1222 ft
21.
Keep right at the fork
1161 ft
22.
Continue onto London Road (A45)
2.1 mi
23.
Continue onto Nene Valley Way (A45)
3 mi
24.
Take the ramp on the left towards A43
1252 ft
25.
Enter Lumbertubs Way Interchange and take the 1st exit onto Lumbertubs Way (A43)
20 ft
26.
Exit the roundabout onto Lumbertubs Way (A43)
1.4 mi
27.
Enter the roundabout and take the 2nd exit onto Lumbertubs Way (A43)
116 ft
28.
Exit the roundabout onto Lumbertubs Way (A43)
0.8 mi
29.
Enter Round Spinney Roundabout and take the 3rd exit onto Moulton Bypass (A43)
541 ft
30.
Exit the roundabout onto Moulton Bypass (A43)
1 mi
31.
Enter Moulton Roundabout and take the 2nd exit onto Kettering Road (A43)
237 ft
32.
Exit the roundabout onto Kettering Road (A43)
0.5 mi
33.
Enter Overstone Grange Roundabout and take the 1st exit onto Kettering Road (A43)
114 ft
34.
Exit the roundabout onto Kettering Road (A43)
1.1 mi
35.
Enter the roundabout and take the 2nd exit onto Kettering Road (A43)
97 ft
36.
Exit the roundabout onto Kettering Road (A43)
4.4 mi
37.
Continue onto Broughton Bypass (A43)
569 ft
38.
Enter the roundabout and take the 2nd exit onto Broughton Bypass (A43)
116 ft
39.
Exit the roundabout onto Broughton Bypass (A43)
1.2 mi
40.
Continue onto Kettering Road (A43)
1.1 mi
41.
Enter Broughton Interchange and take the 1st exit
95 ft
42.
Exit the roundabout
1178 ft
43.
Merge right onto A14
0.6 mi
44.
Take the ramp on the left
0.3 mi
45.
Enter Glebe Farm Interchange and take the 2nd exit onto A43
738 ft
46.
Exit the roundabout onto A43
1.4 mi
47.
Keep left onto Rockingham Road (A43)
1.4 mi
48.
Enter Barford Bridge Roundabout and take the 2nd exit onto A43
236 ft
49.
Exit the roundabout onto A43
4.1 mi
50.
Enter Eurohub Roundabout and take the 2nd exit onto Stamford Road (A43)
205 ft
51.
Exit the roundabout onto Stamford Road (A43)
0.3 mi
52.
Enter Geddington Road Roundabout and take the 1st exit onto Geddington Road
108 ft
53.
Exit the roundabout onto Geddington Road
0.9 mi
54.
Enter the roundabout and take the 2nd exit onto Lloyds Road (A6086)
236 ft
55.
Exit the roundabout onto Lloyds Road (A6086)
0.3 mi
56.
Enter the roundabout and take the 1st exit onto Lloyds Road (B6481)
98 ft
57.
Exit the roundabout onto Lloyds Road (B6481)
563 ft
58.
Enter the roundabout and exit onto B6481
505 ft
59.
You have arrived at your destination, on the right
0 ft


How much does it cost to travel from Richmond upon Thames to Corby by car?

Fuel for the journey in the form of petrol costs 16.2 pounds. The gasoline price is assumed to be 144 pence per litre in the calculation above, and the vehicle's fuel consumption is 37.5 miles per gallon.
The expense for two individuals participating in a carpool is £8.1 (equivalent to 16.2/2) per passenger.
The fare for this journey for three individuals in the vehicle is 5.4 pounds (16.2/3) per passenger.
4.05 pounds (16.2/4) per passenger is the expense of this journey for a car carrying four passengers.


(92.62 miles at 37.5 mpg) x 144 pence per litre for fuel equals 16.2 pounds.

To be more precise, the outcome is as follows:

Fuel Required = Distance / Vehicle Fuel Consumption (in miles multiplied by 4.54609 per vehicle)11.2 litres are consumed (92.62 miles * 4.54609 / 37.5 mpg).

Required fuel = 11.2 lt

Fuel expenses are calculated as follows: 11.2 litres x 144 pence per litre, or 16.2 pounds

16.2 pounds for fuel to get from Richmond upon Thames to Corby
 

 

Tire air pressure affects automotive fuel economy because:

Rolling Resistance: Well-inflated tires demand less energy to move. This minimizes engine workload and boosts fuel efficiency. However, underinflated tires increase rolling resistance, making the engine work harder and using more petrololine.

Tires filled to the manufacturer's recommended pressure provide best performance and fuel efficiency. Any tire pressure below or above this suggested range can reduce fuel efficiency.

Uneven tire wear increases rolling resistance and fuel consumption. Regularly checking and maintaining tire pressure helps save tire wear and fuel use.

Properly inflated tires improve handling and stability, especially when cornering and braking. Smoother driving reduces rapid acceleration and braking, improving fuel efficiency.

Environmental Impact: Proper tire pressure improves fuel efficiency, lowers tire wear, and extends tire life. This reduces the environmental impact of tire disposal and manufacture, improving sustainability.

Fuel efficiency, vehicle performance, and safety depend on optimum tire air pressure. Regularly checking and adjusting tire pressure according to manufacturer guidelines saves fuel and reduces environmental impact.

Diesel cost from Richmond upon Thames to Corby.

The trip with diesel fuel costs 11.2 £ (167p/lt, 62.7 mpg).
For 2 passengers: 5.6 £ (11.2/2) /p.
For 3 passengers: 3.73 £ (11.2/3) /p.
For 4 passengers: 2.8 £ (11.2/4) /p.

Alternative routes from Richmond upon Thames to Corby

The second route from Richmond upon Thames to the Corby is 92.38 miles and takes 1 hour and 51 minutes.

The third route from Richmond upon Thames to the Corby is 96.3 miles and takes 2 hours and 10 minutes.

Which is the cheapest route from Richmond upon Thames to Corby by car?

The cheapest route from Richmond upon Thames to Corby is the second suggested route (92mi, 1h 51min) and costs 16.1 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The second cheapest route from Richmond upon Thames to Corby is the first suggested route (93mi, 1h 49min) and costs 16.2 £.

The most expensive route from Richmond upon Thames to Corby is the third suggested route (96mi, 2h 10min) and costs 16.8 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Richmond upon Thames to Corby?

There are three suggested routes. The fastest route is 93mi (distance from Richmond upon Thames to Corby) and its duration is 1h 49min. The other route is 92mi, and its duration is 1h 51min. The slowest route is 96mi, and its duration is 2h 10min.

RouteCalculator provides you with the information to prepare your trip from Richmond upon Thames to Corby by car or motorbike. It offers you alternative road routes that you can follow to go from Richmond upon Thames to Corby. It provides driving directions from Richmond upon Thames to Corby, i.e. where to turn and when, distance of the Richmond upon Thames - Corby route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Richmond upon Thames to Corby with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Richmond upon Thames located?

Richmond upon Thames is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Richmond upon Thames has coordinates 51.4613110o,-0.3037420o. RouteCalculator provides a map of Richmond upon Thames from which you can plan your trips to other UK cities.

What is the location of Corby?

Corby is located in Northamptonshire county and in England. It is situated at an altitude of 105 meters above sea level. Corby has coordinates 52.4922983o,-0.6842333o. RouteCalculator provides a map of Corby from which you can plan your trips to other UK cities.