Route from Richmond upon Thames to Harborough

The distance between Richmond upon Thames and Harborough is 100 miles. Travel time is 1 hour and 58 minutes.

From: Richmond upon Thames, County: Greater London, England
To: Harborough, County: Leicestershire, England
100 mi , 1 h 58 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Richmond upon Thames to Harborough on map



Driving directions from Richmond upon Thames to Harborough

100 mi 1 h 58 min
1.
Head southeast on Duke Street
37 ft
2.
Turn left onto The Quadrant (A307)
737 ft
3.
Continue onto Kew Road (A307)
598 ft
4.
Turn left onto A307
109 ft
5.
Merge right onto Richmond Circus (A316)
7 ft
6.
Keep right onto Richmond Circus (A316)
177 ft
7.
Make a slight left onto Kew Road (A307)
1.8 mi
8.
Turn right onto Kew Bridge Road (A205)
707 ft
9.
Continue onto Chiswick High Road (A205)
719 ft
10.
Enter Chiswick Roundabout and take the 2nd exit onto Gunnersbury Avenue (A406)
188 ft
11.
Exit the roundabout onto Gunnersbury Avenue (A406)
213 ft
12.
Keep right onto Gunnersbury Avenue (A406)
2.7 mi
13.
Enter Hanger Lane Gyratory and take the 3rd exit towards A406(N)
1112 ft
14.
Exit the roundabout towards A406(N)
3.8 mi
15.
Take the ramp on the left onto North Circular Road (A406)
0.3 mi
16.
Enter Staples Corner West Roundabout and take the 2nd exit
223 ft
17.
Exit the roundabout
315 ft
18.
Take exit 1 on the left towards M1: The NORTH
0.3 mi
19.
Merge right onto M1
54.8 mi
20.
Take the ramp on the left
1222 ft
21.
Keep right at the fork
1161 ft
22.
Continue onto London Road (A45)
2.1 mi
23.
Continue onto Nene Valley Way (A45)
3 mi
24.
Take the ramp on the left towards A43
1252 ft
25.
Enter Lumbertubs Way Interchange and take the 1st exit onto Lumbertubs Way (A43)
20 ft
26.
Exit the roundabout onto Lumbertubs Way (A43)
1.4 mi
27.
Enter the roundabout and take the 2nd exit onto Lumbertubs Way (A43)
116 ft
28.
Exit the roundabout onto Lumbertubs Way (A43)
0.8 mi
29.
Enter Round Spinney Roundabout and take the 3rd exit onto Moulton Bypass (A43)
541 ft
30.
Exit the roundabout onto Moulton Bypass (A43)
1 mi
31.
Enter Moulton Roundabout and take the 2nd exit onto Kettering Road (A43)
237 ft
32.
Exit the roundabout onto Kettering Road (A43)
0.5 mi
33.
Enter Overstone Grange Roundabout and take the 1st exit onto Kettering Road (A43)
114 ft
34.
Exit the roundabout onto Kettering Road (A43)
1.1 mi
35.
Enter the roundabout and take the 2nd exit onto Kettering Road (A43)
97 ft
36.
Exit the roundabout onto Kettering Road (A43)
4.4 mi
37.
Continue onto Broughton Bypass (A43)
569 ft
38.
Enter the roundabout and take the 2nd exit onto Broughton Bypass (A43)
116 ft
39.
Exit the roundabout onto Broughton Bypass (A43)
1.2 mi
40.
Continue onto Kettering Road (A43)
1.1 mi
41.
Enter Broughton Interchange and take the 1st exit
95 ft
42.
Exit the roundabout
1178 ft
43.
Merge right onto A14
3.5 mi
44.
Take the ramp on the left towards A6
0.3 mi
45.
Enter Rothwell Interchange and take the 4th exit onto Rothwell Interchange (A6)
314 ft
46.
Exit the roundabout onto Rothwell Interchange (A6)
400 ft
47.
Enter Rothwell Interchange and take the 2nd exit onto Rothwell and Desborough Bypass (A6)
247 ft
48.
Exit the roundabout onto Rothwell and Desborough Bypass (A6)
0.5 mi
49.
Enter the roundabout and take the 1st exit onto Rothwell and Desborough Bypass (A6)
100 ft
50.
Exit the roundabout onto Rothwell and Desborough Bypass (A6)
2 mi
51.
Enter the roundabout and take the 2nd exit onto Rothwell and Desborough Bypass (A6)
136 ft
52.
Exit the roundabout onto Rothwell and Desborough Bypass (A6)
0.9 mi
53.
Enter the roundabout and take the 1st exit onto Desborough Road (A6)
107 ft
54.
Exit the roundabout onto Desborough Road (A6)
1.9 mi
55.
Enter the roundabout and take the 2nd exit onto Market Harborough Bypass (A6)
75 ft
56.
Exit the roundabout onto Market Harborough Bypass (A6)
1 mi
57.
Enter the roundabout and take the 3rd exit onto Market Harborough Bypass (A6)
247 ft
58.
Exit the roundabout onto Market Harborough Bypass (A6)
2.8 mi
59.
Enter the roundabout and take the 3rd exit onto Melton Road (B6047)
463 ft
60.
Exit the roundabout onto Melton Road (B6047)
2.5 mi
61.
Continue onto Shangton Road (B6047)
0.6 mi
62.
Make a slight right onto Melton Road (B6047)
1.3 mi
63.
You have arrived at your destination
0 ft


How much does it cost to drive from Richmond upon Thames to Harborough with petrol?

Let's delve into the expenses of a road trip from Richmond upon Thames to Harborough. The journey using petrol will set you back 17.5 pounds. Now, let's walk through how we arrived at this figure.

Firstly, we consider the price of petrol, which is 144 pence per liter. Next, we take into account the car's fuel consumption rate, which stands at 37.5 miles per gallon.

Now, suppose you're carpooling. If there are two passengers sharing the ride, each person will contribute 8.75 pounds (£17.5 divided by 2). With three passengers, the cost per person drops to around 5.83 pounds (£17.5 divided by 3). And if there are four passengers onboard, each person chips in 4.38 pounds (£17.5 divided by 4).

Let's delve deeper into the calculations. To determine how much fuel is needed for the trip, we rely on the distance and the car's fuel efficiency. The distance between Richmond upon Thames and Harborough is approximately 100.44 miles. So, to cover this distance, the car will require roughly 12.2 liters of petrol. We obtained this value by dividing the distance by the car's fuel consumption rate of 37.5 miles per gallon and then converting it to liters.

Once we have the amount of fuel needed, we calculate the total cost. Multiplying the fuel quantity (12.2 liters) by the price per liter (144 pence) yields 17.5 pounds. Therefore, the fuel cost for the journey from Richmond upon Thames to Harborough is 17.5 pounds.
 

Diesel cost from Richmond upon Thames to Harborough.

The trip with diesel fuel costs 12.2 £ (167p/lt, 62.7 mpg).
For 2 passengers: 6.1 £ (12.2/2) /p.
For 3 passengers: 4.07 £ (12.2/3) /p.
For 4 passengers: 3.05 £ (12.2/4) /p.

Alternative routes from Richmond upon Thames to Harborough

The second route from Richmond upon Thames to the Harborough is 97.85 miles and takes 2 hours and 2 minutes.

The third route from Richmond upon Thames to the Harborough is 101.76 miles and takes 2 hours and 20 minutes.

Which is the cheapest route from Richmond upon Thames to Harborough by car?

The cheapest route from Richmond upon Thames to Harborough is the second suggested route (98mi, 2h 2min) and costs 17.1 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The second cheapest route from Richmond upon Thames to Harborough is the first suggested route (100mi, 1h 58min) and costs 17.5 £.

The most expensive route from Richmond upon Thames to Harborough is the third suggested route (102mi, 2h 20min) and costs 17.8 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Richmond upon Thames to Harborough?

There are three suggested routes. The fastest route is 100mi (distance from Richmond upon Thames to Harborough) and its duration is 1h 58min. The other route is 98mi, and its duration is 2h 2min. The slowest route is 102mi, and its duration is 2h 20min.

RouteCalculator provides you with the information to prepare your trip from Richmond upon Thames to Harborough by car or motorbike. It offers you alternative road routes that you can follow to go from Richmond upon Thames to Harborough. It provides driving directions from Richmond upon Thames to Harborough, i.e. where to turn and when, distance of the Richmond upon Thames - Harborough route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Richmond upon Thames to Harborough with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Richmond upon Thames located?

Richmond upon Thames is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Richmond upon Thames has coordinates 51.4613110o,-0.3037420o. RouteCalculator provides a map of Richmond upon Thames from which you can plan your trips to other UK cities.

What is the location of Harborough?

Harborough is located in Leicestershire county and in England. It is situated at an altitude of 131 meters above sea level. Harborough has coordinates 52.5708762o,-0.9346458o. RouteCalculator provides a map of Harborough from which you can plan your trips to other UK cities.