Route from Richmond upon Thames to Newcastle upon Tyne

The distance between Richmond upon Thames and Newcastle upon Tyne is 285 miles. Travel time is 4 hours and 54 minutes.

From: Richmond upon Thames, County: Greater London, England
To: Newcastle upon Tyne, County: Tyne and Wear, England
285 mi , 4 h 54 min
Tolls: 0£ Stations
Fuel consumption:
Fuel cost:
Passengers:



Route from Richmond upon Thames to Newcastle upon Tyne on map



Driving directions from Richmond upon Thames to Newcastle upon Tyne

285 mi 4 h 54 min
1.
Head southeast on Duke Street
37 ft
2.
Turn left onto The Quadrant (A307)
737 ft
3.
Continue onto Kew Road (A307)
598 ft
4.
Turn left onto A307
109 ft
5.
Merge right onto Richmond Circus (A316)
7 ft
6.
Keep right onto Richmond Circus (A316)
177 ft
7.
Make a slight left onto Kew Road (A307)
1.8 mi
8.
Turn right onto Kew Bridge Road (A205)
707 ft
9.
Continue onto Chiswick High Road (A205)
719 ft
10.
Enter Chiswick Roundabout and take the 2nd exit onto Gunnersbury Avenue (A406)
188 ft
11.
Exit the roundabout onto Gunnersbury Avenue (A406)
213 ft
12.
Keep right onto Gunnersbury Avenue (A406)
2.7 mi
13.
Enter Hanger Lane Gyratory and take the 3rd exit towards A406(N)
1112 ft
14.
Exit the roundabout towards A406(N)
3.8 mi
15.
Take the ramp on the left onto North Circular Road (A406)
0.3 mi
16.
Enter Staples Corner West Roundabout and take the 2nd exit
223 ft
17.
Exit the roundabout
315 ft
18.
Take exit 1 on the left towards M1: The NORTH
0.3 mi
19.
Merge right onto M1
70 mi
20.
Keep right onto M1
22.2 mi
21.
Keep right onto M1
56.8 mi
22.
Keep left onto M18
8.7 mi
23.
Take the ramp on the left onto M18
1311 ft
24.
Keep left towards A1(M): The NORTH
765 ft
25.
Continue onto Doncaster By-pass (A1(M))
0.3 mi
26.
Merge right onto Doncaster By-pass (A1(M))
7.1 mi
27.
Continue onto Doncaster Bypass (A1(M))
8.2 mi
28.
Keep right onto A1(M)
35 mi
29.
Keep right towards A1(M): The North
27.6 mi
30.
Keep right towards A1(M): Durham
30.7 mi
31.
Keep left towards A1: Newcastle
4.8 mi
32.
Take the ramp on the left towards A184: Central Newcastle
1.3 mi
33.
Keep right onto A189
1.3 mi
34.
Turn left onto Gallowgate (A189)
253 ft
35.
Turn right onto Strawberry Place
722 ft
36.
Turn left onto St James Street
389 ft
37.
Turn right onto Terrace Place
686 ft
38.
Turn right onto St Thomas Terrace
302 ft
39.
Turn right
60 ft
40.
You have arrived at your destination, on the left
0 ft


If you were to travel from Richmond upon Thames to Newcastle upon Tyne, how much would it charge you?

A trip with petrol gasoline will cost you 49.7 pounds. According to the figure presented above, the price of petrol corresponds to 144 pence per litre, and the amount of petrol that the vehicle consumes is equivalent to 37.5 miles per gallon.
Through carpooling, the cost of this trip is 24.85 pounds for each of the two passengers.
When there are three people in the automobile, the cost of this trip is 16.57 pounds (49.7/3) for each individual passenger.
This trip will cost you 12.43 pounds for each of the four people who are travelling in the automobile.


The cost of fuel is equal to (284.82 miles / 37.5 miles per gallon) multiplied by 144 pence a litre, which is 49.7 pounds.

A more in-depth explanation of the result is as follows:

Fuel usage is miles multiplied by 4.54609 divided by the distance travelled by the vehicle.Consumption is 284.82 miles multiplied by 4.54609 divided by 37.5 miles per gallon, which equals 34.5 litres

It takes 34.5 litres of fuel.

The cost of fuel is equal to the amount of fuel required multiplied by the price per litre, which is 34.5 litres multiplied by 144 pence a litre, which is 49.7 pounds.

The cost of fuel from Richmond upon Thames to Newcastle upon Tyne is 49.7 pounds.
 

Diesel cost from Richmond upon Thames to Newcastle upon Tyne.

The trip with diesel fuel costs 34.5 £ (167p/lt, 62.7 mpg).
For 2 passengers: 17.25 £ (34.5/2) /p.
For 3 passengers: 11.5 £ (34.5/3) /p.
For 4 passengers: 8.63 £ (34.5/4) /p.

For these reasons, diesel cars use less fuel than petrol cars:

Diesel fuel has more energy per litre than petrol. Diesel engines can drive farther and provide more power for the same fuel volume, reducing fuel consumption.

Diesel engines have higher compression ratios than petrol engines, increasing thermal efficiency. Diesel engines get more energy from each fuel unit due to this increased compression ratio. Because diesel engines are thermally efficient, they use less fuel.

Diesel engines create more torque at lower RPM than petrol engines. Diesel vehicles require less throttle input to maintain speed, which improves fuel efficiency, especially during steady-state driving.

Diesel cars consume less fuel than petrol cars due to these considerations.

Alternative routes from Richmond upon Thames to Newcastle upon Tyne

The slowest route from Richmond upon Thames to the Newcastle upon Tyne is 279.39 miles and takes 4 hours and 56 minutes.

Which is the cheapest route from Richmond upon Thames to Newcastle upon Tyne by car?

The cheapest route from Richmond upon Thames to Newcastle upon Tyne is the second suggested route (279mi, 4h 56min) and costs 48.8 £ (petrol fuel cost, 144p/lt, 37.5mpg).

The most expensive route from Richmond upon Thames to Newcastle upon Tyne is the first suggested route (285mi, 4h 54min) and costs 49.7 £.

For greater safety, the driver should choose the route that passes through the highway (median barrier) and not through smaller roads (curves in the road, bad road conditions, no median barrier).

How to get from Richmond upon Thames to Newcastle upon Tyne?

There are two suggested routes. The fastest route is 285mi (distance from Richmond upon Thames to Newcastle upon Tyne) and its duration is 4h 54min. The slowest route is 279mi, and its duration is 4h 56min.

RouteCalculator provides you with the information to prepare your trip from Richmond upon Thames to Newcastle upon Tyne by car or motorbike. It offers you alternative road routes that you can follow to go from Richmond upon Thames to Newcastle upon Tyne. It provides driving directions from Richmond upon Thames to Newcastle upon Tyne, i.e. where to turn and when, distance of the Richmond upon Thames - Newcastle upon Tyne route, travel time, display of the route on the map, fuel cost (petrol, diesel) and toll (if exist) cost.

In case you share the journey (carpooling) from Richmond upon Thames to Newcastle upon Tyne with other people or friends, RouteCalculator provides the cost of the journey and the amount that each passenger will have to pay.

Where is Richmond upon Thames located?

Richmond upon Thames is located in Greater London county and in England. It is situated at an altitude of 9 meters above sea level. Richmond upon Thames has coordinates 51.4613110o,-0.3037420o. RouteCalculator provides a map of Richmond upon Thames from which you can plan your trips to other UK cities.

What is the location of Newcastle upon Tyne?

Newcastle upon Tyne is located in Tyne and Wear county and in England. It is situated at an altitude of 56 meters above sea level. Newcastle upon Tyne has coordinates 54.9782520o,-1.6177800o. RouteCalculator provides a map of Newcastle upon Tyne from which you can plan your trips to other UK cities.